The Myths And Facts Behind Key Repair How to Do a Broken Car Key Repair

You're headed to work in rush, and put your keys in the ignition. You try to turn it, and it snaps off from the lock!

There are some things you can do to solve the issue before calling an expert locksmith. Here are some easy fixes. key repairs . Contact a locksmith

One of the most devastating things that could happen to an owner of a vehicle is a broken key inside locks. This is particularly aggravating if the driver is trying to get somewhere, or pick up a kid. In this scenario it is imperative to act fast to attempt to free the stuck key.

A locksmith with experience is the best option as they will have the right tools and know how to get rid of the keys that are broken without damaging the lock. Many people will look for something that is thin and rigid, such as paperclips or toothpicks. However it is not the best solution as they are too thick to fit into the lock.

The best option is to use a pair of tweezers. They are small and can easily reach into the lock. They should also be rigid enough to grasp the broken part of the key and pull it out. If you don't own tweezers it might be worth searching for keys extractors, which are usually sold in auto parts stores. They are narrow and flat with hooks that are small enough to be inserted into the key hole, and then hold onto the broken bit of the key.

A magnetic key hook can be used to adhere to the metal in the lock and then pull it out. This is not always a good option, as it can sometimes get caught under the lock and cause further damage to it. In this case, it's best to call a professional locksmith.

Some people try to glue the two pieces of their snapped car key together with superglue, as it will help them take it out of the lock. This could be risky since the metal pieces may tangle and break later. It is also crucial not to turn the key, because this could cause damage to the lock or ignition cylinder. Get a locksmith professional to replace the broken key immediately.

2. Drill a hole

Sometimes, a key gets damaged inside the lock, and even with an extra key, you may not be in a position to gain access to your vehicle. In these instances drilling the lock is the best choice.

First, you must make sure the keyhole is positioned for a basic tumbler key. If it's not then you won't be able to remove the pins and cause damage to the lock's door or mechanism.

It is important to keep in mind that you'll drill through an outer plastic layer as well as an inner layer of metal. A small drill bit is enough to get through these layers, but it is important to be sure to not go any deeper than that. If you drill to deep, it could cause damage to the wiring harness or cause the drill bit to become stuck within the hole.

Wearing a mask or protective equipment is also recommended when using a drill. This will prevent dust and dirt from entering your respiratory system.


It is also recommended to have a pair of pliers and tweezers in your possession in the event that the broken key is sticking out of the lock. If there is enough of the key sticking out to be grasped by tweezers, or pliers, this could be sufficient to get it out of the lock. If not, however you'll require tools like this one to encase the tool inside the lock and then rotate it towards the key in order to grip it and take it out of the hole.

3. Drill a nail

If you cut your car key in half, it could cause you to be stranded. There are several ways to solve the issue without having to pay an locksmith. The first option is to use a nail or screw. They can be found in your home or at a local hardware store. It is best to choose nails that are as thin and long as possible. This way you can fit it into the hole, and then use epoxy to connect the two parts together. Make sure that the nail's back is flat. This will allow it to fit into the slot in the key. This will stop it from moving around and breaking in the future.

4. Super Glue

A lot of car owners use DIY hacks like using super glue try and fix a broken car key, but this is not a safe option to make. You could end up damaging the lock, and have to pay more money to replace it.

The first step is to examine the keys that are broken and make sure they are in terms of size. broken key repair near me is essential to ensure that all the pieces of the glue are aligned properly and that the key will fit in the lock after they've been bonded. Then, using a piece fine-grit paper or a metal filing, smooth out the edges of the broken pieces. This will help the glue stick better and decrease the chance of a loose key in the future.

Once you have polished the edges of the broken key, apply a small amount super glue to one of the ends. Only apply the smallest amount of super glue, since excessive amounts can make the key too large. It will then be difficult to fit into the lock. After that, carefully place the two pieces of the key and press them together. After a few seconds the glue will begin to set and join the key fragments.

A bobby-pin or paperclip can also be used as a tool to remove a damaged key from a lock. They can be cut like a pick and inserted into the lock. This method is particularly helpful if the break is near or within the keyway or lock hole.

Another important point to keep in mind is that if the damaged car key is equipped with electronic components, it will require an entirely new key from the dealership or an experienced locksmith. This is because the key will need to be programmed with a brand new code and the chip will need to be replaced. In contrast, if only the metal or shell of the key fails the key, it will usually only require an entirely new key cut, and doesn't require reprogramming or replacing of the electronics.