10 Amazing Graphics About Replacing A Window Handle Tips For Replacing a Window Handle

The replacement of your window handle is an easy project that can be accomplished in the at-home comforts of your home. Follow these tips for a smooth operation and great appearance.

Start by removing the screw covers to reveal the screws within your uPVC window handle. Measure the spindle to make sure you're getting the correct size replacement.

1. Take a measurement of the length of the Spindle.

If you're replacing a window handle, it's important to determine the dimensions of the spindle correct. It can affect the tightness or looseness of the handle, as well as whether the handle locks correctly into the frame of the window. The spindle is a steel shaft that connects the handle to the lock in the frame of the window. The spindle can be either an industry standard cross-section of 8mm or the older 9mm versions. The modern industry standard is 8mm however this was not always the case so when buying a new handle it is essential to verify the measurements.

door handles to measure the length of the spindle is remove the handle that is currently in place and this can be done by turning it to the open position and unscrewing the two screws (which may be hidden behind plastic caps that have to be removed) that hold the handle. Once the handle has been removed, take a measurement from the base to the end. This will provide you with the measurements needed to purchase a new one.

There are a variety of options when you're looking to select a new window handle. From sleek chrome that will fit into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or even the more quaint Tudor Cottages with curled mongoose tail latches. The possibilities are endless, but the most important thing to do is select a style that is suitable for your home.

Espag handles are typically fitted to uPVC windows and are the same size with 43mm centres (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. Window handles from Cadenza are a different size again since they have an angled blade which operates an interlocking mechanism that is multi-point inside the window.

Another factor when choosing the best window handle is determining what hand you need to use. This is determined by the hand you use to open the door. Inline espag window handles are not handed and can be utilized on right or left handed windows. Cranked window handles are handed and are only used on windows that open in one direction.

2. Take the handle off

A window handle that falls out can be frustrating, regardless of whether the handle has been damaged or worn out. However, the good news is that replacing a uPVC window handle is a very easy task you can complete yourself. All you need are the most basic tools and some time to complete the process.

First of all, you must open the window and make sure that it is in the unlocked position. Then, remove the screw caps holding the handle in place. After these have been removed, you are able working on removing the handle itself.

The handle is attached to a spindle inside the window frame. The handle is fixed with either a screw or pin dependent on the kind of handle. The most popular types of handles are inline Espagnolette handles and cockspur handles. Both of these types of handles are utilized on casement windows, as well as aluminium windows. The handles can be locked by using a key to stop unauthorised access from the outside. Or you can lock the handles by turning them clockwise.

To remove the handle you will require a flat-bladed screwdriver. After the clip has been released, the handle will slide off the spindle. When the handle is removed, you will be required to measure the length of the spindle to make sure that the new handle is compatible with this size.


Once you have determined the correct size for the handle, you can screw it into the correct position. You will need to make sure that the new handle is securely fixed and is turning the correct way (clockwise for open, or counterclockwise for closed). It is also crucial to ensure that it is not installed upside down.

Replace the screw caps. After you've done this then you can test the handle to make sure that it is working properly. You should also test the locking mechanism by moving the handle to the locked position and then back to the locked position.

3. Take off the Screws

A uPVC window handle is a crucial component of every home and is usually the first thing to exhibit signs of wear and tear or damage. This can be caused by natural elements or by regular use and sometimes even deliberate damage by opportunistic criminals who may want to open a closed window and gain access to your home. A simple repair can fix the problem and prevent it from repeating itself.

UPVC handles can also be difficult to remove when the locking mechanisms aren't working properly. Often, the problem is solved by replacing the multipoint lock rather than the entire handle. It's definitely worth a look as it can save you money.

After you've removed the old handle you'll need to take off the screws that were holding it in place. The screws are typically located on the inside of the handle base. It could be necessary to use a screwdriver to do this. Be cautious not to over tighten the handle as this could cause it to become loose.

Then, you'll need to locate the screws or pins that keep the handle in place. They will likely be located on the inside of the handle base and you will need to use a screwdriver or a pair of pliers in order to remove the screws. After you have removed them, you'll need to replace the caps on screws in the event that you want to do so and test the new handle to make sure it's working correctly.

Install the handle by aligning the spindle with the cutout in the window mechanism. Then screw it into. Make sure the handle is in the open position and that any screws are securely secured prior to replacing the screws' covers if you wished to do this. After this is done, you're all done and you are able to enjoy your new window handle. I hope this will enable you avoid having to pay for costly window and door replacements in the future. If you would like assistance with this or any other aspect of your uPVC windows, don't hesitate to contact us.

4. Fit the New Handle

Whether you're replacing a broken handle or simply changing it the procedure is simple and can be completed in a matter of a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll require to complete the task are essential. Always consider safety when working with windows and tools. Take your time to follow the steps and ensure that you have an appropriate handle to use.

The first step is to find the screws that hold your existing window handle and take them out, while maintaining an appropriate grip on the handle to prevent it from crashing and result in injury. Once the screws have been removed, you can put them in a safe place to be replaced in the future.

After removing the old handle, you can now begin to install your new one. The handle must be fitted perfectly in order to function correctly and secure the window in its closed position. The next step is to slide the metal square on the back of the handle into the hole of your window mechanism, ensuring that it is secure.

The final step is to replace the caps on the screws and then test the handle to ensure it works. If you're not happy with the results or if your window does not shut or open properly, call our experts for assistance.

The majority of UK homes have uPVC Windows. This means that a lot of them will need to be changed at some point because of wear and tear or breakage. The process is relatively straightforward and can be completed by anyone with a bit of knowledge of DIY. It is essential that the handle you select is in line with the style and size of your window. Contact our team if you are unsure of the type of handle you require. They will be able guide you through all the possibilities.