3 Reasons The Reasons For Your Peugeot Key Replacement Near Me Is Broken (And How To Repair It) Peugeot 3008 Key Fob Problems

Peugeot's mid-sized 3008 SUV has a lot going for it. The Key Lab is well-constructed, drives good and has a large boot. Can it compete in the most competitive segment of the market perhaps?

If your Peugeot keyfob doesn't work it is possible that it was exposed to soapy or clean tap water. It is possible to remove the battery and clean it with isopropyl ethanol or electronic cleaner.

Dead coin battery

Peugeot key fobs are powered by the size of a coin. The power utilized to operate the remote locking system as well as other features. This battery is not long-lasting and can wear after years of usage. A simple way to check whether the battery is faulty is by performing a voltage test. A multimeter is used to determine the voltage between the battery's plus and minus poles. This test can determine whether the battery is dead.

The receiver module may be the reason for your key fobs failing to function after having used your Peugeot 3008 for a long period of time. The receiver module is responsible for capturing radio frequency signals from key fobs and transferring them to the vehicle's systems. If the receiver module has problems, it won't be able to transmit commands to other modules inside the car.

Another common cause for an unusable key fob is moisture or sweat on the circuit board. This can lead to short circuits, which can drain the battery and disable the fob's remote locking feature. If this is the case you need to bring your key fob to a chip level service technician to fix it.

Water damage

Water damage could be a problem in the event that you dropped your keyfob in the swimming in the pool, washed it off or left it outside in the rain. Water is a good conductor, and it could damage circuit boards. It can also cause corrosion to metal lines on the key fob as well as other components. A wet circuit can also cause the battery to lose its charge.

If you have an additional key fob, you can use it to unlock or lock the Peugeot 3008 to eliminate a dead coin-cell battery as the cause of the issue. Another issue that can prevent your key fob from functioning correctly is interference signals that interfere with the signal that is sent to the receiver module. These signals of interference can originate from a wide range of things including radio transmitters that are near.

If you hear sloshing sounds emanating from your Peugeot 3008 when you drive it could be due to a clogged condensate drain from the evaporator. You can test this by blowing compressed air through the drain holes underneath your door. You can also use flexible metal wire for wriggling drain holes to clean any dirt that has been accumulating. Air pockets can also be identified by sloshing sounds.

A malfunctioning receiver module

The receiver module in the receiver module of a Peugeot 3008 is responsible for transmitting a remote keyless message from the keyfob to a receiver inside the car. If this module is damaged, it can stop the car from recognizing the key fob. Other causes of this issue are the battery being dead or water damage, or interference with electronic devices that operate at the same frequency as the key fob. In these cases, a message stating "card not detected" may be displayed on the display.

Luckily, there are a number of ways to troubleshoot this issue. You might try replacing the battery or reprogramming your key fob. You can also start your car with a spare. However, if the fob doesn't work after all these steps, it could have a chip that is faulty.


The best way to know whether the key fob has a faulty chip is to take it out and clean it with paper towel and rub alcohol. If the chip is fried you must purchase an entirely new one. The FB Series enclosures come with an holder for coin cells, which fits the most common types of key fob batteries. These enclosures are customizable with digital printing and CNC-machined cutouts. If your key fob has been exposed to dirty or salty tap water, the chip could be contaminated and need to be cleaned.

Keyless entry system that isn't working properly

If you get "card not detected" This indicates that your car cannot receive the signal generated by your key fob. This can be due to a variety of causes such as batteries that are weak or dead. The issue is usually resolved by pressing the start button on the key fob. In some cases however, you might need to take your key fob to a Peugeot dealership for additional repairs.

Examining the battery is the first step in troubleshooting an Peugeot 3008 keyfob that won't lock or unlock doors. Batteries are often the main reason for a fob that is malfunctioning however, there are other factors that cause this issue too. These include worn buttons damage to the receiver module, water issues, and signal interference.

If you've recently experienced the Peugeot key fob exposed to pure tap water it's best to remove the battery and dry the electronic components with paper towels. You can also use isopropyl alcohol or a cleaner for this purpose. If the fob has been exposed to salt or soapy water, it's best to replace it.

If your key fob not working, you can try to reset it by disconnecting the battery with 12 volts for about 15 minutes. Connect the negative cable, and then the positive cable.