UPVC Window Repair Tips That Will Change Your Life
uPVC Window Repair
While uPVC windows are durable and resistant to harsh weather conditions they can still develop problems that require fixing. These issues are easily fixed at a fraction the cost of a new window.
It is common for windows to be difficult to open since the hinges aren't as strong. Fortunately, this problem can be fixed by lubricating hinges with something like WD-40.
![](https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/keycutting-300x200.jpg)
Cracked or broken glass
We have glass all over our homes; in windows, doors, tables and surfaces, the front of stoves and microwaves, and even in picture frames. Your windows can get cracked due to a good hit or rough-housing among friends. They must be repaired before they worsen. These kinds of cracks can be easily repaired without having to replace the window glass or frame.
To begin, wipe the area with a moist cloth to remove any dust, dirt or fingerprints. Then, use a small amount of epoxy to close the area around the crack. Allow the epoxy to fully dry before moving the window. This is a straightforward repair that will help you save the expense of replacing your uPVC windows.
Another common issue with uPVC windows is the window gasket becoming soft or detached from the frame. This could lead to loss of insulation, and the entry of cold air or water into your home. This can be easily fixed with an abrasive blade like an ATM card to cut the gasket from the window frame. If you have a amount of time, you can also apply a little more epoxy over the crack to make it look like the crack was never there in the first place.
If the crack is deeper than you can reach it with your fingers, you can use a piece of tape to protect the area from further damage. You can also use clear nail polish to fill the crack and stop it from growing any further. The most important thing is to start this process immediately after you detect the crack, or it will quickly spread and be more difficult to fix.
If you want an option that is more durable you can try uPVC epoxy to fix your cracked or broken glass. This is the most labor-intensive of the options however it will yield the most effective results in terms of durability and appearance. Follow the manufacturer's instructions to apply the epoxy, and be sure to spruce up the surface with an acetone-soaked rag once it is fully dried.
Water Leaks
uPVC windows are very robust, but they do require some maintenance and care. They can cause a myriad of problems if not maintained in a timely manner. These problems could range from water leaks around the frame, to condensation within the glass units.
A uPVC window specialist can help pinpoint the issue and fix it. They can also provide advice on how to avoid it happening again in the future.
Leaking uPVC windows can be a major issue and it is essential that they are fixed as soon as is possible. If not addressed, the damage could cause significant damp issues to your house, which can lead to expensive repairs and a reduction in energy efficiency.
A leaky uPVC is often fixed by applying a patch. This sealant is applied inside the window to prevent water from getting into the home through the damaged area.
Double glazed units that are misty or cloudy may be an indication of a failed seal. This could be due to a number of reasons, such as wear and tear, aging weather conditions, or simply aging.
One way to avoid this is to have your windows cleaned on a regular basis. It is recommended that you clean your windows at least twice a yearly with a white soft cloth that is soaked in warm soapy water. Avoid using colored cloths, because they can leave stains of dye. For stubborn stains, it is best to apply solvent PVC cleaner. This can be purchased at any hardware store. It is easy to use. To avoid streaks, wipe the window frames off of direct sunlight in a shaded area.
Faulty Hinges and Locks
Over time, the window hinge can be bent or damaged. This could lead to a gap forming in the frame, which can allow draughts in and reduce energy efficiency. A draft can make your home feel uncomfortable and cold and lead to increased heating bills.
A gap in a uPVC window is a problem that can be resolved easily. A uPVC specialist will identify the problem and fix for you. A small hole can be repaired with carpenter’s glue and a wooden stick that is inserted into the gap. The dowel must be placed in a way that it is flush with the hinge leaf and has smooth surfaces. The carpenter's glue is applied to the dowel and then tapped into position. When it is dry the screw can be put into it to secure the hinge leaf.
UPVC window hinges and locks can become stiff to open and close over time due to general wear and tear, or due to blockages caused by dirt and debris. These should be checked regularly and cleaned to ensure that they are operating properly. A lubricant, such as WD-40 should be used to keep the moving parts in good working order.
It is recommended to wash UPVC windows at least once a year. This can be done using a damp cloth that has been dipped in a mix of water and mild soap. The areas around the corners of the window should be cleaned more often to keep dirt from accumulating and rust.
The handle of a uPVC window may also become stiff when opening or close. This is a possibility if the handle is dropped or if there are problems with the locking mechanism.
upvc repair is generally a quick and easy repair to make and can be done by the homeowner themselves if they follow a few simple steps.
A broken lock poses an issue for security, since it could make your home vulnerable to burglars. A damaged lock could make your uPVC door or window difficult to open, which could be an inconvenience for you. If this is the case, you may need an entirely new handle or re-align the multipoint locking system.
Stuck Handle
If your upvc handle gets stuck and becomes inoperable, it can be very frustrating. Particularly when you attempt to open your windows and find that it requires a lot more force or simply does not open at all. This is due to a wire inside the handle holder that has become rough. You can usually solve the issue by pulling the handle out to examine the wire.
Another method to get this addressed is by putting the lubricant graphite or paraffin on the pole sliders which will then allow the handle to move up and down. This is also a good time to give your handle a thorough clean to avoid any future issues related to it.
If the problem is with the push button itself, it can be repaired by using superglue. Superglue should be completely dry before applying it again. If the handle is completely damaged or broken you can fix it by requesting an alternative and then screwing it in the frame. This is a far simpler fix than replacing the whole window frame, and is something you can tackle yourself, especially if you have the right tools.