The Three Greatest Moments In Window Handle Replacement History Choosing the Right Window Handle For Your UPVC Window

The correct window handle is vital for a properly installed uPVC. You'll want a design that's not just functional but also complements the style of your home.

Making changes to the uPVC window handle is simple. All you need are the tools listed below and just a few minutes of your time.

Metal

Metal window handles are both a decorative piece and an essential hardware item to enhance the security of your home. A variety of window handles are available, suited to different frames and materials. Some of these handle designs are specifically designed for sash windows in order to make opening and closing the window easier and less likely to block. If you are looking for a more secure option, there are also several locking mechanisms designed to block the window from being opened beyond a certain level.

The most common type of window handle on UPVC is the epag handle. They feature a mental spindle in the back, which is connected to the frame of the window and controls the window mechanism. Both UPVC and aluminum windows come with them.

Cockspur handles are another common type of window handle, typically found on older UPVC windows. They can be more difficult than modern Espag handles since they utilize a traditional peg locking mechanism.

For a sleeker design There are cam handles available. They have a slender edge, and are made to work with other types uPVC windows. They work well on tilt and turn windows, where it is possible to open the window from the bottom while still allowing the top of the window to be opened.

It is crucial to take a variety of factors into consideration when choosing new window handles made of steel such as step height and how the handle turns. The former refers to the distance between the handle's underside nose and the base of the screw plate, while the latter refers to the direction in which the handle will be able to rotate. For instance, some handles rotate clockwise and others are anti-clockwise.

Plastic

There are many kinds of window handles made of plastic. All are designed to operate a window and protect it against unwanted intruders. They are available in a range of colours and styles to fit uPVC and aluminium windows. Some are made with a lock built-in. This increases security, allowing you to keep the windows open and secure from burglars.

Window handle issues can occur in a myriad of situations. Sometimes, they may not be able to be turned correctly. This could be due to dust entering the mechanism, which causes obstruction or dirt. Another problem that can be observed is when the window handle begins moving in a tight manner or is clinging to something. This is a sign that the window handle requires attention.

It is essential to contact a specialist when this happens. They can assist you in resolving the issue quickly and effectively. They can also give guidance on how to replace a handle made of plastic with one that is more durable and will work better.

No matter what kind of handle you've got the majority of manufacturers use the same fasteners. This means it's simple to replace your window handle and lock using a exact match.

When you're trying to find the ideal replacement handle, it's important to be aware of your window's size and design. This will enable you to choose the right handle that will fit your windows perfectly and doesn't cause problems. Also, be sure to be aware of the spindle length that is the measurement of how far the handle's extends from the base. This is essential when you are planning to use a window handle with restrictions.

Casement

Like awning windows and casement windows hinge on the top and bottom however they open sideways to the left or right, rather than opening up vertically. They are also easier to clean and provide a fantastic view of your backyard or garden, as well as allowing fresh air in. They're a popular choice for new construction and also add architectural interest to older homes. However, with time, they can become hard to open or close because of wear-out of the hardware or worn gears. In some instances, window professionals may need to replace the crank mechanism.

Awning windows or casement windows are usually equipped with the crank and roto gear to allow the window to open and shut. They also have an locking mechanism that holds the sash in place when closed. The lock on an window that is awning works with bezel locks to secure the window. Many people tend to overtighten the handle on the casement windows. This can cause the locking mechanisms to work against each and cause windows to become tangled and not close or open properly.

It's also typical for the handle of the window crank to wear out over time. This can occur if the window was shut and opened repeatedly over a long period of time. It could also happen when the window is being used as a prop when it is open, causing the operating handle to rub against the crank shaft and gears.

Fortunately, replacing a casement or window crank handle for awning is a simple DIY window repair that could save you money in the long run. You'll first have to locate the trim mounting screw that holds the casement cover (Photo 3). Once you've unscrewed the screws, you'll be able to take off the old operator handle and inspect the inside of the crank mechanism. The gears can be lubricated again, but if they are already stripped, you might need to replace them.


Cockspur

Cockspur window handles are found on older uPVC or timber windows. They lock using a key, simple to operate and offer an effective shield against noise and cold from outside. The handle opens outwards when you pull down the lever. The cockspur nose then closes over the wedge striker in the frame, sealing the window. By replacing both the handle as well as the cockspur wedge, you can enhance the efficiency of double-glazed windows and security.

The replacement cockspur window handles are available in right and left hand options and operate by turning them 90 degrees. They are fitted with an'spur' which presses against the PVC wedge that is attached to the window frame to create an extremely secure closure. They are simple to install and are available in a variety of designs, including white, satin chrome, and PVD gold.

The backset measurement of a cockspur's handle can be a challenge, particularly when you're replacing a handle. This handle was designed to address the issue. It features three packers of different thicknesses that can be positioned on the underside of the handle nose.

The Schlosser Technik apto is a premium replacement cockspur that has flexible screw fixing centers. It can be used in a variety of applications ranging from 9mm and 21mm. It also has key locking simple and easy to install and is available in a variety of finishes and includes left and right hand variations.

This handle is suitable for tilt and turn windows however, it is not suitable for a side opening casement window (these use the tilt and pivot separately). This handle can be used to replace damaged or outdated handles on uPVC and aluminium frames using rivets instead of screws. You will require a rivet gun and rivets to fit this handle to the window frame you have.

Espagnolette

The mechanism for locking your uPVC window is the espagnolette lock or shootbolt. They are a common feature in older homes and offer both aesthetics and security for your home. Espagnolette handles can be key-locking as well as non-key-locking, and are available in both inline and cranked designs. They can also come in a straight or curved style. The key-locking button provides an additional layer of protection that prevents the handle from being opened from the outside with a thin screwdriver stuck between the frames. This is a typical burglary technique!

GB DIY Store offers a large selection of handles that are espagnolette. It is essential to determine the size of the spindle of your current espag handle before purchasing a replacement. Once you have done this, simply browse our selection of replacement espag handles to find the ideal design for your windows.

We have a wide assortment of white uPVC inline espagnolette handles in both key-locking and not-key-locking versions. You can choose from a variety of colours and spindle sizes to make sure that your new handles match the frame of your window or décor. Our espagnolette handle collection features modern and contemporary styles, as well as classic designs. Each replacement handle comes with 5 different magnetic spindle lengths between 15mm and 55mm which means you can easily attach the handle to your window without having to purchase a specific size of screw!

upvc door handles at the back of the rose makes sure that the spindle can be used with the left-hand lever or right-hand lever. This will prevent any accidents. A metal spindle insert also helps to hold the handle to the espagnolette, and the handle is held in place thanks to the clever click-fit mechanism that activates when the hand is turned to emit an audible click'.