20 Myths About Subaru Spare Key: Dispelled
How to Reprogramme a Subaru Key
The battery in your Subaru Forester or Outback, Crosstrek or WRX is probably dead if the key fob doesn't open your door as easily as it used to. The good news is that you can replace it yourself.
First, shut off the engine. Then you can open the driver's door by pressing the button for the door to unlock the doors, and close the door.
Replacement
A Subaru key is a small piece of plastic you put in your ignition to unlock and start your car. The key communicates with a system of antennas and radio frequencies to notify your vehicle that you are the authorized user and allows it start. Older cars still use the traditional metal key. Newer models allow you to only start and enter your vehicle using the keyfob.
You can buy a replacement fob at a dealership or online. You can save money by purchasing a new key from the dealership. It will also be programmed to your car. If you need to replace your key fob in the event of an emergency or lost it, you can take it to a local auto parts store. The process is easy and quick, but you should always be careful not to damage the new key by using too much force.
The first step is to figure out the kind of key fob you own. Subaru key fobs are available in three distinct types, each with a slightly different type of battery. If your key fob has become old and inoperable it may need a new battery.
To replace the battery on the key fob, find the small groove between front and back of the key case. Put a flathead screwdriver in the niche and twist. This will allow you to take off the encasement and replace the battery. After you're finished take the two pieces of the fob together.
The next step after replacing the battery is to program the key fob. The procedure for this can be a little confusing however, you'll understand it after you've tried it a couple of times. The key fob needs to be closed and opened within 45 seconds to allow the car's chime recognize it.
Begin by pressing the small silver tab on the back of the fob. It will release a small metal emergency key.
www.g28carkeys.co.uk will let you access the small emergency key. Press it for a period of time equal to your eight-digit number. Then press the unlock and lock buttons. Repeat this process 10 times in a line and your key should now be able to turn on the car.
If you're having trouble with your key fob, you should contact the Subaru dealership in Nyack or Hiley Subaru of Fort Worth. A service center can help you out, and they can even design a new key fob in the event that the previous one is damaged or missing. They can also program the key fob to work with your vehicle and make sure you're prepared to drive. The dealership can also help you with any other services you require, including repair or maintenance.
Programming
Reprogramming the Subaru key fob involves more than simply replacing it. You must first turn off your vehicle and close all doors. When your car is cool, you can begin the process of programming the new key fob. After that, the dome lights should blink and you'll hear a chime coming from the instrument panel. You could also try closing and opening the door of your driver 10 times in quick succession. It could be effective in the event of luck.
The next step is to open the case of the key fob to find the circuit. You'll need to write down the eight-digit serial number on the circuit board. This number will be used to program your key fob.
Although there are numerous DIY articles on the internet that teach you how to modify your Subaru key, most of them are model-specific. This is because current Subaru keys and remotes are smart key systems which require special programming to allow you to lock and unlock your vehicle. To correctly program the Subaru remote or key you must connect it to an appropriate device that is compatible with your vehicle. The machine will start the programming process through communication with the computer in your car. This procedure can only be done by a dealer or automotive locksmith.
Reprogramming your Subaru key fob isn't going to cost as much as you think. The cost of programming a Subaru key fob is anywhere between $200 and $400 based on the model year of your Subaru. The exact cost will depend on the type of keys you own and the location you live in (a locksmith will come to you) as well as the time of day, and the like.
It's best to buy your new Subaru key fob from an authorized dealer. This will ensure that the key is properly programmed for your vehicle and is covered by your warranty. It's also likely to be cheaper than purchasing an aftermarket replacement from a store online.
Planet Subaru has a wide range of vehicles, and offers a helpful service. We can help you find the car of your dreams at a price that is competitive! Contact us today to learn more. We look forward to hearing from you!
