Five Kia Picanto Key Fob Replacement Lessons From Professionals How to Replace a Kia Sportage Replacement Key

For many Kia models keys, there is a keyless entry system built-in. The key can be compared to an electronic remote and is able to be replaced with a fresh one from a Kia dealer or locksmith.


Key fobs can stop working for a variety of reasons, such as a dead coin battery, worn buttons signals, water damage, signal interference and a damaged receiver module. Here are some suggestions to assist you in getting your Kia sportage replacement key to work once more.

How to replace the remote key or smart key?

The battery in your Kia's intelligent key will eventually require to be replaced, whether it is a remote key that starts with a push button or a regular metal key that doesn't contain transponder. This is especially the case if your car shows a message that states the remote or smart keys aren't powered.

This is a relatively simple procedure. To replace the battery on the keyfob remove your mechanical key from the slit at the back of the fob. Then, pry the cover open. A small screw is located inside the key fob that holds the battery in its place. By using a small screwdriver loosen the screw and pull out the battery that was in place. Insert the new battery and then close the cut on the key fob.

Test the key fob by pressing the lock and unlock buttons. It's okay when the doors lock or unlock as you expect. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers become chilly or when you need to do some errands in Brandon.

Note: Certain key fobs (transponder chip or smart keys) may require their programming completed. This requires a particular programming machine that only the dealer or automotive locksmith can access. Other keys (non-transponder metal keys) don't require programming. If you're required to reprogramme your key, it is necessary to record the key code number on the key code tag.

How to replace the battery

If the Kia key fob is unable to respond to pressing the lock or unlock button, it is likely that the battery is depleted. A battery that is not functioning properly could cause other issues such as the check engine light coming on or delayed cranking of the engine. It is fairly easy to replace key fob batteries by using only the use of a few tools.

Before beginning the process be sure that your vehicle is off and that all doors are shut. Find the small, metal or plastic piece that is on the bottom of your key fob, and move it until a metal key is released. This key can be put into the door's driver handle to unlock your car.

To replace the battery in the key fob, you must remove the rear cover. Use a plastic pry tool to loosen up the latch that holds the black negative cable. Remove the old battery and then position the new battery so that its "+" side faces you, and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into position without putting too much force on it to avoid damaging or breaking the contacts of the metal.

After you have installed the new battery and turning the key fob on and off in the ignition until the door locks up. You can then test the Kia's key fob again to confirm that it's working properly.

How do you replace the smart key?

There is a possibility of having an ordinary keyfob or Smart Key depending on the model of Kia Sportage. The difference between these is that the smart key comes with tiny mechanical key blade that is hidden inside, while the standard fob isn't equipped with. Both kinds of key fobs come with a battery inside them that eventually will need to be replaced. Fortunately, this is quite simple and takes only two minutes.

Make sure you turn off your Kia, and be on a level well-lit and well-lit area before you begin. Be aware that there are tiny pieces inside the fob that could fall out if you are not careful.

The release button for the small size is located on the lower backside. It will be an oval or circular slot. When you press it button, the mechanical blade will pop out and you can then open the key fob.

After the key fob has been open, remove the old battery. kia sorento key fob should be a CR-2032 and can be bought online or from your local auto parts store. After you've finished with the battery, you should be able to lock, unlock and start your car using your key fob, even if the engine isn't running!

How to replace the mechanical key

The Kia keyfob is a wonderful convenience which allows us to lock or unlock our car with just pressing one button. As with all devices that is used, the Kia key fob can have issues at times. There are ways to resolve these issues and keep your key fobs running for many years.

A dead or low-quality battery is among the most common issues. The fob could be able to stop working completely or to work intermittently. If this is the case you should replace the battery with a fresh new one.

If this doesn't solve the issue, use a flathead screwdriver standard to push the fob's casing made of plastic open. Be careful not to damage internal components or scratch the plastic. After the battery has been removed and replaced with a new one.

Close and open the door with the mechanical key. (Every Kia fob comes with a spare mechanical key which will fit into the slot). Test the fob to make sure it's working as intended. If the device isn't working, call a dealer or locksmith to help solve the issue. Make sure they make you an emergency key that works across all trunk and door cylinders to prevent lockouts in the future.