15 Reasons You Must Love Double Glazed Window Repair Double Glazed Window Repair

It's worth checking the warranty included with most double-glazed windows. It usually covers any problems with window hardware, such as hinges and locking mechanisms in the first 10 years.

A break in the seal is typically the cause of mist between your glass windows. This needs to be addressed immediately to prevent mold or damp growing in your home.

Condensation Between the Windows

If you notice condensation forming between your windows, it is an indication that the sealing in the gases that insulate the window has failed. This is a serious problem that needs to be addressed immediately, especially during the winter months when humidity levels are at their highest. RepairMyWindowsAndDoors can also cause damage around the sills and sealant, or even mould or mildew.

Double-glazed windows shouldn't be able to have condensation between the panes. This issue can be caused by excessive humidity or a particularly cold snap. Fortunately, it is repaired without replacing the entire window. A professional can drill tiny holes in the window and spray special cleaning solution inside. The water is then removed from the window and an anti-fogger is fitted to prevent the accumulation of moisture from happening again.

Condensation can also happen between the windows due to air leakage, or any other cause outside the window. In this instance, it may take longer for the moisture inside the window to accumulate, because the air must be sufficiently warm to evaporate the water molecules. In these cases it is best to replace double-glazed windows than attempt to repair the sealed units.

A double-glazed glass window is comprised of two or more pieces of insulated tempered glass, which are joined by a metal frame. The space between the windows is filled with an insulating gas, such as Krypton or argon, and then sealed. The seal is responsible for preventing the insulating gas from escaping and also preventing moisture and air from entering through the gap.

As windows age, the seals will deteriorate and can allow moisture to enter the gaps between the glass panes. It is important to know when the seals are leaking, as it means that the double glazing is no longer functioning as well as it did in the past. This could lead to poor energy efficiency, higher heating costs, a damaged properties and the risk of condensation between the windows.

Mist

It is normal to see condensation appear on your windows. This means that your double glazing system is working correctly and is able to maintain warm in your home. The condensation forms because the air outside is warmer than the glass and it reaches its dew point before the window. Double glazing of top quality is a fantastic method to get this.

If the condensation is located on the inside of your window then it could be a sign of a ventilation problem in your home. The excess moisture won't be absorbed and end up on the window, carpets, furniture, and other areas of your home. It is recommended to have this checked by an expert and making sure that there is plenty of fresh air moving through the house will help to prevent it from happening in the future.

The other reason you might get mist in your double-glazed window is that the seal between the two panes has broken down. This could be due wear and tear or chemical cleaning solutions that are being used. If this occurs the best solution is to have the windows repaired in the shortest time possible.

Repairing your windows professionally will ensure that they are dry and free of fogging, condensation and misting. This is also much cheaper than replacing the windows, and you will save money on your energy bill.

A FENSA registered window installer will provide you with a cost estimate for the repair or replacement of your double-glazed windows. If your windows are old and have been used for a long time you may want to think about upgrading them to new A-rated energy efficient windows.

It is a good idea to retain copies of any agreements and warranties with your window installers. It will be helpful if you have any future problems with your windows. Contact your window fitters to resolve the problem. This is a better option than ignoring the issue and causing more problems for your home.


Close or open without difficulty

When double glazed windows are difficult to open and close, it's not just an inconvenience, it can lead to an increase in energy costs due to heat loss and draughts. It can also be a security issue especially when the locks aren't operating properly. It is crucial to address any problems with double glazed windows and doors when you notice them.

If you can't open your windows and have tried the simplest solution such as using a screwdriver to prise it open or tapping around the frame using a sharp object, the issue might be more serious. The window may have moved and requires a reset or there could be a gap between glass and frames. In either case, seek out a double glazing repair specialist to ensure the repairs are completed correctly and to prevent any further problems.

It's not common for UPVC window handle and lock mechanisms to become difficult to operate or get stuck particularly if they're old and worn. This is usually due to a build-up of grease or dirt in the handle. This can be easily solved by cleaning it using a uPVC cleanser. If this doesn't work, try tapping the uPVC using a screwdriver. Be careful not to damage either the handle or window handle mechanism.

If this does not resolve the issue, then the window may have to be replaced as it is likely that the hinges are no more in the proper position or the locking mechanisms are damaged. In this case you should consult a UPVC window specialist.

David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing windows that are double-glazed and have jammed or been locked shut. He has a wealth of experience converting discontinued window mechanisms to modern ones. This can often save you the cost of replacing the whole window. Call or email us today for more information or a no-cost quote.

Warping

Double-glazed windows are usually a great option for saving energy at home. They are made up of two separate panes which contain a spacer or dense gas in between them. This creates a seal which keeps cold air out and warm inside. However, over time, the windows may become damaged or broken and require repair. Luckily, most of these repairs are easy and can be done without the expense of replacing the entire window.

One of the most common issues double-glazed windows face is warping. This occurs when windows begin to flex or twist or bow. This can affect the structural integrity and insulating properties of the windows. Double-glazed windows must be installed correctly and maintained regularly to avoid this issue.

If your double glazed windows are beginning to warp, it is crucial to get in touch with a specialist immediately to help prevent the situation from worsening. They can inspect your windows to determine the root cause. They will employ specific tools to correct the issue and make sure that your windows are completely sealed.

Water vapour can trigger this problem, as it can accumulate between the windows over time. It can be caused by a number of different factors like the weather, humidity and temperature changes. To resolve this issue, the specialist will drill a tiny hole to let out moisture. They will then apply an agent for cleaning to wash the glass and then apply sealant to help protect it from moisture in the future.

If windows aren't being shut or opened, it could be an indication of a problem with the mechanism or hinges. Before calling a professional to address the issue, it's worth lubricating these parts. This can often resolve the issue and decrease your need for replacements. If your windows are dated or don't offer the insulation you want, it may be better to replace them.