The Most Underrated Companies To Follow In The Double Glazing Door Lock Repairs Industry Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism faulty? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.

You'll be wasting energy in the event that your double-glazed doors fail to work properly. This can also increase the chance of burglary. Owen the Locksmith will be able to repair your door lock for a reasonable cost.

Snapped Key

It can be frustrating when a key gets stuck into the lock. It could also be a security risk since the door might not lock and could leave you open to intrusion. There are a couple of quick fixes you can try to fix the problem and make your door functional again.

Remember to remain calm. If you panic you could end up pushing the damaged key further into the lock.

Then spray WD-40 or another penetrating oil into the lock to help the broken piece to slide out more easily. You can also use the screwdriver to break any pieces stuck. If you have a piece of the key stuck, grab it with the help of a paperclip or any other thin metal object and pull it. Both of these methods work well, however, be very careful not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have one of these tools you can bend a hook with needle-nosed pliers. Finally, you can make use of a pair of tweezers to grasp and pull out the last piece of broken keys.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It's available at most hardware stores and is used to freeze any moisture present inside the lock.

If none of these solutions seem to work, it could be time to call a locksmith. The experts at Fitlocks can quickly fix problems such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair via our website or give us a call to discuss your needs.


Broken Cylinder

A broken cylinder is a serious security threat. Luckily, it's an easy repair for a professional locksmith to complete. Locksmiths will need to tap the cylinder to fix it. This can be accomplished with the hammer or other tool. The best method is to use a wire or a long match. Then, place the match's tip or wire in the keyway. The locksmith will hit the lock to break it open. This is superior to using a hammer that could damage the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the block and the cylinder head are made of various metals such as cast-iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest.

Corrosion can be a reason for cracks in the cylinder. If the cylinder head and the block of the cylinder are not maintained properly, this could lead to rusting or corrosion, which may cause them to expand at a higher rate than they ought to. This can lead to cracks over time.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn, it could be due to a variety of causes. A malfunctioning locking mechanism, misalignment or a worn handle are common causes of this issue.

This is a straightforward and inexpensive fix that most double glazing owners can accomplish. A professional locksmith will typically be able to solve this issue within a matter of hours after arriving at your residence. Depending on your needs they will be able to replace the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience can always advise you on the most cost-effective solution for your home. They can even suggest upgrades to the highest-security 3 Star TS007 euro cylinders that will give you an additional layer of protection against burglars. It is a small cost to enjoy the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks could break. They have complex mechanisms that wear out over time. It isn't always easy to pinpoint the cause of a broken window handle lock and repair it correctly.

If the issue is related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazing door's security and allow you stop draughts. Incorrectly repairing or replacing your handle can be very expensive and could damage the door's frame and lock It is therefore worth taking some time to do it right.

Screwdriver Open the window and the screw loose, loosen the handle. The screw should be located on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic purposes. Be careful not to damage any of the internal components within the handle, such as the levers or plates on either side of the spindle. Ideally, keep these in the same order so that you can replace them again if needed.

Next, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle that fixes it to the internal spindle with a second screwdriver. Once the screw is loose, remove the handle and remove the broken spindle. Replace it with a new spindle, ensuring that it's the same length (you can find them online or at hardware stores). Screw it in the correct position. Don't over tighten the screw as this could damage the handle and the window frame.

Check that the new handle is correctly fitted after which you can close and test the handle. It should operate smoothly and you'll be able open your window once more.

While you're working on the handle, make sure to ensure that your uPVC windows are shut correctly. If they aren't closing properly, you could experience damp or draughts inside your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges on your window frames to ensure they close properly.

Broken Spindle

It is usually the case that the spindle inside the handle breaks, rather than the handle itself. This is especially common with uPVC tilt-and-turn windows. These windows require a handle to operate an locking device within the frame of the window. The handle is connected to a central rod that activates a series of mushroom-shaped locking cams that lock into the window frame keep. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle is broken, this can be a very frustrating issue.

Fortunately, there are steps that can be taken to fix this problem. A reputable locksmith will be able to quickly and efficiently repair this issue. A good locksmith will be able to disassemble the handle of the window by using a tool that removes the wheel part where the spindle is located. This can be done without damage to the handle or window frame.

After removing the wheel the technician can examine the spindle and determine the reason for its break. This involves disassembling the spindle and inspecting every component, observing any wear or damage. This procedure is typically carried out by technicians working in a clean environment.

Next, clean the damaged spindle. This will remove any debris or dirt that could be hindering it from operating normally. The spindle could be replaced or repaired. If the technician is replacing the spindle he can use a dowel that is similar in size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the new spindle is an exact fit with the handle.

If the damaged spindle can't be repaired, it could need to be replaced entirely. Home centers sell generic replacements but If the style of your window is rare then it will be necessary to speak with a woodworker or cabinet maker who can duplicate the exact component for you. Once the new spindle is installed, it can be fitted to the handle by lining up the holes for screws in the handle and the frame existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.