Its History Of Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that will assist the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is large, you might be interested in the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a variety of issues that include sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need to open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Most often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the old caulking may require removal before a fresh layer is applied. It is important to keep in mind that when it comes to uPVC window repairs , you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens in an ease. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's easy to replace a hinge on a window but it's much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also be disaligned as a result of wear, creating a gap where the sash meets frame. If they're beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it is possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.


The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will lessen draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.