7 Simple Strategies To Completely Rocking Your Upvc Door Handle Replacement Choosing the Right UPVC Door Handle Replacement

Replacing the handles on your doors made of upvc is relatively easy however choosing the right handle can be tricky. The majority of modern double-glazed handles have spring cassettes built into them, however older models don't have.

If the handle of your upvc is loose and floppy, it could be an issue with the internal components of the multipoint lock. This article will discuss several possible problems and their causes.

Handles that slide or drop

UPVC handles can withstand wear and tear, particularly in older properties. The most common reason that a handle becomes floppy is due to a damaged spring cassette inside the door lever. This is typically caused by excessive force and the square spindle that holds the cassette could be moved or round off.

The good news is that a uPVC door handle replacement is a fairly simple task and can be done within a couple of minutes. The first step is to disassemble the handle unit that was previously installed by removing the fixing screws that are visible on the side of the lever plate. After the handles have been removed, you can then unscrew the cassette from the square spindle and replace with the new one.

You can find a vast selection of uPVC door handles to pick from on the internet and a lot of them come in different finishes. The finish you select will determine the longevity of your handle as well as how it is easy to clean. Finishes like PVD, Stainless Steel or Resista are made to withstand corrosion and will last for up to 25 years.

Once you have selected a colour or style you can then choose the type of handle you need. The most popular kinds are lever and pad arrangement. Lever pads are equipped with an inside lever and a paddle on the outside which is typically used as a security device to prevent unauthorised access.

Next, measure and note the dimensions of the handle you currently have. You will need to measure the PZ dimension, which is the distance between the screw hole and the centre of your lever. It is also important to determine how the handle's length is and the dimensions of its keyhole. Once you have these measurements, you can then compare these with the handle sizes matrix to find the correct replacement.

Broken springs

Over time uPVC door handles are prone to becoming wobbly or loose and at times the spring cassette inside might break. The tiny springs bring the handle lever into a horizontal position and without them, doors won't be able to lock properly.

Modern uPVC handles come with these cassettes built into the back plate. These springs are typically built into older uPVC door mechanisms. It is not something you can fix by yourself, but it's worth having your locksmith take a look as this could be the reason for the loosening of uPVC handles.

One of the most frequent problems associated with uPVC door handles is that they become unstable or wobbly after a certain period of time, and this is typically due to worn springs, which is a relatively simple fix. This is typically caused by excessive handling of the handle. The square spindle of the handle will wear down and causes the springs to move.

To fix this, you will have to open the door to the handle plate and then remove all the screws. This can be done with the help of a Philips screwdriver. After the screws have been removed the handle can be taken off. The plates for the handle are then able to be gently pulled apart. You can then remove the springs from the old ones and replace them with fresh ones.

This is important to note when purchasing a replacement handle. This measurement is referred to as the PZ and it is crucial to make use of a calibrated measuring tape for an accurate reading.

After replacing the springs you should be able to use the handle with no issues. However, it's always important to grease the internal mechanism to ensure that everything functions just as it should. This will ensure that your uPVC door is as safe as it is, and increase their comfort over time.

Handles that slide around

Handles that slide could be caused by a variety of things. One of the most frequent causes is that the levers of the handle are not aligned with the lock. door handles repair near me can happen with both uPVC and composite doors, but it is typically more evident on older doors since they are often made from less durable materials that don't resist the elements.

This problem can be solved by a professional who will realign the handles and ensure they're in line with the door lock. They'll also inspect the lock to determine whether anything requires fixing. In most cases, a simple adjustment to the handle springs is all that's needed to solve this problem.

It's simple to replace your uPVC handle however, you must take measurements of the handle you have to ensure that the replacement is of the right size. You'll need to measure the distance between the two fixing screws and the dimensions of the lever as well as the key-hole position. Then, you can utilize this uPVC handle size guide to find the right replacement for your home.

After you have made the measurements, you can remove the old uPVC handle. It is usually quite easy and requires a screwdriver to get to the screws that are on the inside of the door. After the screws have been removed, you'll need to remove the handle and then install the new handle.

Before you start making any changes, make sure that the door is secured open by a wedge to prevent it from closing in the middle of your work. After you remove the handle, you can access the parts beneath the door that are causing the door to slide.


If you don't have the time or the energy to complete this job yourself, a handyman from Fantastic Services can help. They will use specialist locksmith opening methods to unlock the door without causing damage, and then replace the faulty handle and make sure that everything is in place and working exactly as it should.

Gearbox damaged

A damaged gearbox may cause the door handle made of upvc to become stiff or lose functionality. This can also prevent the lock from being able to be opened using a key. This can be very dangerous and should be dealt with promptly. It is important to call a locksmith if you cannot solve the issue on your own. They have the tools and expertise to get the job done right.

The first step is to unhook the handle from its cover plate. This can be done using a screwdriver with a flat head. After removing the handle, take out the middle screw that holds the barrel. After removing the middle screw, you will be able to loosen the two screws which hold the barrel. Then, you can pull the barrel from the door. You will need to open the door to accomplish this, so make sure that you have someone to assist you.

Once you have removed your cylinder from the handle you can replace it with a new one. It is crucial to ensure that the new cylinder is the same size as the previous one. You could have an incorrectly aligned handle. This could lead to various issues that could cause leaks and drips.

Most door handles made of upvc feature slots for adjustment. These slots can be used to tighten and loosen the handle. They are usually on the inside of the door near where the handle is connected to the cylinder. The adjustment slots can be tightened using an allen wrench. After you've made all the necessary adjustments then you can screw the handle back in and then put it back into its place. Then, you can test the handle and make sure it is working as expected.

If the door handle of upvc becomes loose or floppy when it is closed, it's usually an indication that the upvc gearbox has broken down or internal spring components are breaking down. This could cause your multipoint locks made from upvc to fail and leave your door open to intrusion. If this happens, it will be required to replace the upvc gearbox. It will cost between PS145 - PS280 inclusive of labour.