5 People You Should Be Getting To Know In The Repairs To Upvc Windows Industry Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers to help the new pane to fit properly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and repair the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the door and the window is significant, you may want to use an alarm system that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to unblock the windows to access the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

It is a fairly easy fix that can be completed by any DIY expert. Depending on the severity of the issue the caulking used previously may need to be removed before a fresh layer can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens with an ease. These are easily replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do if you have someone to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a photo via our website will often resolve the problem. We are happy to give advice.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. Secondly the interlock, this is on the hinge side of the window, may be misaligned. Again, it is possible to give them a good clean, but in some instances it could be necessary to have them replaced.


These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. window repair is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will lessen the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. They can help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be cheaper to replace them than to repair them. If you encounter any issues with your window made of upvc, it's best to consult a professional as soon as you can.