Watch This: How Repairs To Upvc Windows Is Taking Over And What To Do About It Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need source some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you're planning to try to remove the window panes by yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for fit. If you are happy with the size of the window, tighten the screws to hold them in place.

If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn Hornchurch double glazing repairs to position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and wet floors. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how severe the issue is, the old caulking may need to be removed. When it is time to uPVC repair, you must be careful not to over-caulk. This will make your window harder to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges


Hinges could be at fault if your uPVC window is difficult to open or if it blows open with an ease. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

The issue can be caused either due to opening the window in the wrong way or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also reduce the possibility of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it is possible to just give them a clean but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be positioned on the top of your windowsill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and there may come an point at which it is more economical to replace them than repair them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.