What Is Saab 9-3 Key Replacement And Why Is Everyone Talking About It?
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add another key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new key and transponder need to be bought and programmed to the car.
It is an excellent idea to rotate your keys in order that one does not wear out faster than the other.
how to get a saab replacement key will help to keep your keys in good condition.
Replacement Case
The new key fobs for keys are not like the old Saab keys. They are equipped with electronics which make it hard to copy. This has made car theft much more difficult than it was twenty years ago. It has also made it more expensive to replace keys lost.
Every owner of a Saab 9-3 should have at least two functioning keys. If one is lost, it costs a fortune to get another one for the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.
There are ways to reduce these high costs. Some parts suppliers will use the code of an extra key to cut a brand new metal blade for a fraction of the cost of the dealer. The key, however, must be the same as the original to work correctly in your vehicle.
Follow these steps to replace the case. You will need to have an open-faced screwdriver and a lot of patience. Utilizing the screwdriver, slowly break the plastic and remove the emergency key from the case. After the case is open remove all electronics and put them in your new case. Make sure you put the correct key and badge back inside the case, too.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap part that can be replaced quickly and easily. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the remote key fob battery in just four steps. This tutorial should work for any modern saab key fob, although the process might differ slightly.
This button is usually located near the Saab logo on the back of the fob. This is usually located close to the Saab logo on the back of the fob. Then, use a flathead screwdriver to insert into the small hole of this button. This should be sufficient to open the fob case so that you can replace the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob and program it to your car. The entire process should take no more than a half hour at the most. It is a very simple procedure that doesn't require any special tools.
If you lose a key the procedure will be more complicated, but it can still be done. The dealer needs to first determine the VIN of the vehicle, and then purchase an additional TWICE module and key blade with the correct unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it's got a battery within. The batteries are able to last for and will eventually fail. This is a problem that occurs that affects all cars. The good news is that you can change the batteries in most key fobs, and not have to replace the entire case. You can purchase replacement fobs on Amazon that include all the electronics already in place, so you'll simply open the case and replace those batteries that are old. It is important to keep in mind that you will need to remove the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot located in the middle of the case. Work the screwdriver around the case until it will split open, making it simple to take it out.
When you're ready to replace the keys ensure that you have a spare as this can reduce the total cost by a significant amount. If you have an additional key, you can ask the dealer to cut it and program it for your vehicle. This is much less expensive than buying a new key fob.
If you don't have a spare car key, you can add an additional key to your car, but this will require a lot of research and effort. The cost for adding a second key is a few hundred dollars, and it also requires the programming of the car's computer. Professionals can accomplish this, but it's an expensive option.
Replacement Ignition
The modern SAAB 9-3 is an alarm system that is more sophisticated built around a key code. This means that should you lose only one working key, adding another one could be very expensive as the car has to have a special computer module installed and it also must be specially programmed to accept an additional key. The majority of locksmiths aren't able to do this and even dealers will charge hundreds of dollars just to program the new key!
If you've lost the only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and will charge top dollar for it. Instead we can reprogram the EEPROM in your current car computer to make it ready for an additional key, saving you over 50% of the price you be charged at a dealership.
If you've been a long time owner of an 03-11 SAAB 9-3, you probably know that the ignition key isn't really all that durable. If your ignition key is not working correctly, you should look into replacing it. They can become sticky and the buttons are known to fall off. It's good to know that replacing the ignition key isn't as complicated as it sounds, and it can be done in a short time using the proper tools.
