15 Mazda Keys Replacement Benefits Everyone Should Know How to Replace a Mazda Key

Mazda is a brand known for its innovative and technologically advanced technology. Some of these systems improve performance or safety while others make driving around East Stroudsburg Easton and Brodheadsville easier.

The key fob, for instance, is a good example of this. This handy device allows you to lock, unlock and begin your Mazda by pressing the button. However its battery should be replaced every now and then.

Lost Keys

Keys stolen or lost are an extremely frustrating issue. It is fairly easy to replace the Mazda Key for older models with regular keys made of metal. However, newer cars require computer chips with special programming capabilities that are only made by a dealer or locksmith.


To start, you will need to have the VIN for your car. It is usually found on the dashboard for the driver, on your insurance card, or in the vehicle's documents. Write down this information to give to the locksmith or the dealership.

You'll also need an extra working key. Put the key in the slot and turn the ignition to ON. After about five seconds, remove the key and turn off the ignition off. Repeat this procedure with the second key. After both keys have been put in, the new key's computer chip will pair with your car.

If you lose your keys and do not have a backup set, you'll need to get the car tow away to a dealer. Then, you'll have to show proof of ownership and pay for the replacement key. You might have to wait several days while the dealer places an order and pairs a replacement key to your car. You can save money and time by having a locksmith replace your key instead of taking it to the dealer.

Ignition Cylinder Repair

The ignition cylinder is the component of your Mazda that allows you to start your car using a key. If you are having trouble getting it to turn over or you are unable insert the key into the switch, the ignition cylinder could need to be replaced.

Ignition cylinders fail more often than keys, which last for longer. There isn't mazda 6 key fob for them, but you can help them last by keeping your key clear and avoid excessive shaking or jiggling of the key.

To replace the ignition cylinder, first take off any trim and covers that are blocking the way. Depending on the model, you might need to remove the cover of the steering wheel. You may also need to remove the accessory switch and wiper. Use a socket wrench or screwdriver to depress the release tab on the cylinder. This releases the cylinder from the switch and allows it to slide out of the housing.

Install the new cylinder by connecting the wires to it, tightening the two screws at the top, and replacing the switch. Reconnect the battery and test the key insertion/removal function of the new cylinder. Connect the battery, then do this 3 to 5 times. Then, try to start your car to make sure the system is functioning properly.

Remote Control Replacement

If your Mazda key remote stops working, you'll need a professional to get it back up and running. While this isn't as common as an ignition cylinder issue however, it can happen and it can leave you in some situations. Locksmiths are competent to replace your car key remote and can even handle all the necessary programming that goes along with it.

The bare minimum that you'll need to supply to locksmiths in order for them to perform this service is the year and type of your Mazda vehicle. This will allow them to collect the proper supplies and know if any additional programming of keys is required for your Mazda model.

It could be that the battery of your key fob is not fully charged. In this scenario the best thing you can try is to reset your receiver. This will often bring back the functionality. If this doesn't work, you'll have to replace the battery. To do this you will need to remove the key and then use a screwdriver with a flat head wrapped in tape to push the case open on one side. Once you've done that, you can insert a battery into the keyfob. Make sure it's a suitable battery and then close the case. The Mazda's RF unit needs to be programmed to recognize the key.

Transponder Chip Replacement

If you own an Mazda key fob or smart key, there is a good chance that your car has a transponder in it. This tiny piece of technology, which is in essence the micro-motherboard that sends an alert to the immobilizer in your car when installed in the ignition.

They are excellent for security since they block others from beginning your car. They do this by making sure that only you are able to start the car. This is why you have to be cautious in making sure that your key does not disappear or be stolen.

Fortunately, transponder chips can be replaced by a professional locksmith. In order to do this, you'll have to remove the cover of your key fob - usually it's a thin bit of plastic which can be removed using either pliers or a screwdriver. Then, you'll have to remove the chip. It should look like a tiny black square or a transparent tube. After that, you can simply place the chip on a piece of tape and secure it to the ignition lock.

A professional locksmith will be able to do this in a matter of minutes, and assist you in getting back on the road quickly. If you're experiencing issues with your Mazda key, contact a reputable mobile locksmith right now.