How To Find Out If You're Are Ready For UPVC Window Repair uPVC Window Repair

Despite its resistance to harsh weather, uPVC can develop problems that need to be fixed. Luckily these problems can be fixed at a less than the cost of replacing a window.

A common issue is that a window becomes difficult to open because the hinges are stiff. This can be solved by lubricating hinges with WD-40.

Broken or cracked glass

Glass is everywhere in our homes: in windows, doors, tables and surfaces, the front of stoves and microwaves and even in picture frames. Your windows can get cracked from a well-hit ball or rough-housing between friends. They should be fixed before they get worse. Fortunately, these types of cracks are easy to repair without the need to replace your window's glass or frame.

Clean the area with a damp cloth to remove any dust, dirt or fingerprints. Use a small amount epoxy to seal around the crack. Let the epoxy dry completely before moving your window again. This is a very simple repair that will save you the cost of replacing your uPVC windows.

Another common issue with uPVC windows is that the gasket on the window becoming soft or detached from the frame. This will lead to a loss of insulation, and the ingress of cold air or even water into your home. You can fix this by using a flat blade, such as a credit-card to cut the gasket and the window frame. If you've got a amount of time on your hands you can apply a bit more epoxy on the crack to make it appear like the crack did not exist in the first place.

If the crack is larger than you can reach with your fingers, apply tape to protect the area from further damage. Alternately, you can use clear nail polish to fill in the crack and prevent it from growing any further. It is important to apply this treatment immediately after you notice the crack, otherwise it will quickly spread and become more difficult to repair.

If you're looking for an option that is more durable consider using uPVC epoxy to repair broken or cracked glass. It is the most time-consuming alternative, but it will give the highest results in terms of strength and appearance. Follow the manufacturer's instructions for applying the epoxy and be sure to spruce up the surface with an acetone-soaked rag once it is fully dried.

Water Leaks

uPVC windows are durable however, they need some care and maintenance. They can cause a myriad of problems if they are not maintained correctly. These can range from leaks of water around frames to condensation inside glass units.

A uPVC window specialist can help you identify the problem and solve it. Repair My Windows And Doors can also offer suggestions on how to prevent repeating the issue in the future.

Leaking uPVC windows can be a significant problem, and it's essential to fix them as soon as possible. If the damage is not taken care of, it could result in major damp issues in your home. This could lead to expensive repairs as well as the loss of energy efficiency.

A leaking uPVC is often fixed with a patch. It is a sealant that is applied to the interior of the window. It will stop water from leaking into your home through the damaged region.


Double-glazed units that are cloudy or misty could be a sign of a failed seal. This can be caused by many reasons, including weather conditions, age or just wear and tear.

You can avoid this by having your windows cleaned regularly. It is recommended to clean your windows at a minimum of twice a yearly with a white soft cloth soaked in warm soapy water. It is important to stay clear of using any colored cloths as this can leave dye stains on the plastic. For stains that are difficult to remove, it is best to use solvent PVC cleaner. It can be purchased from any hardware store and is easy to apply. Make sure to clean the window frames in a shaded space away from direct sunlight to avoid any streaking.

Incorrectly installed hinges or locks

Over time, the window hinge may become damaged or bent. This can lead to a gap form within the frame that allows in draughts, and reduce your energy efficiency. Draughts can also make your home feel uncomfortable and cold and lead to increased heating bills.

A uPVC window's gap is a problem that can be fixed easily. A uPVC specialist will be able find the problem and fix it for you. Usually a small hole can be fixed with carpenter's glue and a wooden dowel that is inserted into the gap. The dowel must be positioned so that it is flush with the hinge leaf, and has a smooth finish. Then, the glue of a carpenter is spread over the dowel's wood surface and then tapped in to place. After it has dried, a screw can be put in to secure the hinge.

UPVC window hinges and locks can become stiff to open and close over time because of general wear and tear or due to obstructions caused by dirt and dust. These should be checked regularly and cleaned to ensure that they function properly. Make use of WD-40 to ensure that moving parts are in good condition.

It is recommended to clean UPVC windows at least two times per year. This can be done using a damp cloth that has been dipped in a mix of mild soap and water. To prevent dirt and rust clean the the corners more frequently.

It can also be difficult to open or close the handle of uPVC windows. This is a possibility in the event that the handle is damaged or if there is a problem with the locking mechanism. This is generally a quick and simple fix and can be done by the homeowner themselves if they follow a few simple steps.

A damaged lock could be a serious security risk because it indicates that your home is not secured and could potentially be vulnerable to burglars. A damaged lock could make it difficult to open your uPVC window or door, which can be a hassle for you. If this is the case you might need a new handle or to align the multipoint locking system.

Stuck Handle

When your upvc handle becomes stuck and unable to move, it can be a frustrating. Especially when you try to open your window and find that it requires more force or does not open at all. This is usually caused by the wire that is inside the handle holder, and has become rough. It is usually possible to fix the problem by simply taking the handle off to examine the wire.

You can also fix this problem by using graphite or paraffin on the pole sliders. This will let the handle to move up and down. This is also an ideal time to give your handle a general clean to prevent any further issues with it.

Superglue can be used to fix the button if the problem is actually the push button. Superglue should be completely dry before applying it to the next. If the handle has been completely damaged or is broken you can repair it by requesting a replacement and then screwing it in the frame. You can repair this yourself if you have the appropriate tools.