Here's An Interesting Fact About Subaru Xv Replacement Key How to Change a Subaru Spare Key

If you have lost your Subaru car key, call a locksmith. Usually, they will cut an alternative key for you at a lower cost than the dealer.

Subaru car keys are generally either smart "push-to-start" fob remote keys or simple keys made of metal. The Fob keys will need to be programmed.

Keyless Entry System

A key fob lets you to lock or unlock your Subaru from a distance. It can even unlock the trunk or lift gate of your vehicle. These remotes function with an inside keypad to communicate with the vehicle's computer system.

Certain models of Subaru offer a less-known feature called PIN Code Access. You can use a customized number sequence to start and unlock your car. Go through the owner's guide to learn how to utilize this feature if you own a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop working, there's a good chance that the battery in the key fob is dead. The first thing you'll need to check is that it has fresh batteries and you can accomplish this with a small remote tester or a basic multimeter in your garage.

The next step is to remove the circuit board of the transmitter from the key fob to examine it. The board will contain one or two sets of 8-digit numbers, so note down the first set so you can remember it later. Once you've completed this, you can begin programming your key fob at home. This process varies according to the year and model of your vehicle. However, it's usually easy enough to do yourself.

Key Fobs

Subaru's most recent models include key fobs which not only unlock doors, but also activate lights, lock the gas cap, and even start the car. This feature is especially useful if encountered yourself at a gas station and your car won't even start because the battery inside the key fob has gone out.

It doesn't matter if your Subaru is new or older it's likely that your key fob is able to be replaced with minimal difficulty. It's important to keep in mind that models with an advanced level of technological sophistication may require a trip to the dealership. With a little effort and time, you can create your own key fob replacement.

Begin by opening the case and examining the circuit board of the transmitter. (Instructions on how to open the case are usually included in the owner's manual). There should be two or more serial numbers with 8 numbers each. Keep the first set of numbers handy for later reference.

Then, sit in your driver's seat and close all doors. Turn the key to start the vehicle and then switch off after ten turns. Press the lock button on your key fob, and then open the door. This will ensure that your doors are functioning correctly. Close the door, and then remove the key. The chime should be heard from your car, signalling that the key fob is programmed.

Ignition System

The battery in your key may be dead if your Subaru keys aren't functioning as they should. You can replace the battery for your key fob on your own if you know how. The replacement battery isn't expensive and relatively easy to locate. If the key fob you have doesn't respond to your commands, there might be another issue. If you want to get a replacement, it's best to visit an authorized dealer. They'll guarantee that the key is a genuine Subaru key that's covered by warranty. It will also be programmed to your vehicle. subaru chip key replacement G28 Car Keys is a lot safer and simpler than buying an aftermarket key from an organization on the internet.

The dealer will also cut keys for you provided you give them your VIN number as well as proof of ownership. This information will be used to code the replacement key so that it can be recognized by your immobilizer. This is more complex than cutting a new key, and dealers will typically charge more for this service.


Once the new key is programmed, it is possible to switch it into your working key. It takes only five seconds to insert the new key, so keep your working key close at your side. You can take the key off after the security light has stopped flashing and you can test it.

Battery Replacement

Subaru fobs are very beneficial because they can switch on the power windows and sunroofs of your car with just a single button press. But, the battery in your Subaru key fob is not meant to last forever. It will eventually need to be replaced. This short guide from Capitol Subaru will help you to replace the battery on your own.

To start, you'll need to locate the small crevice within the seam that divides the back and front of your key fob. You can then open the seam using a flathead screwdriver and reveal the small compartment that contains the battery. Remove the battery that was in it, and then replace it with a fresh one, ensuring that it is facing the correct side up. After everything is in place and in place, you can use your new key fob to lock or unlock your vehicle with ease!

Always have a spare set keys, especially if one is broken or has been lost. You can purchase a replacement key at your local dealership or have it cut by locksmiths. It's crucial to get your key fob working properly as soon as possible to ensure you drive safely!