10 Unquestionable Reasons People Hate Double Glazed Window Repair Double Glazed Window Repair

Double glazing is a fantastic investment in energy efficiency. It helps prevent loss of heat during winter months and helps to keep your home cool in summer. Repairing your double-glazed windows whenever required is a great method to ensure they remain in good condition.

Over time your double glazed windows can suffer from issues like condensation and misting. This could cause your double glazed windows to be difficult to open and close.

Broken Panes

A stray baseball, a flying pebble from your lawnmowers, or even a severe storm can shatter the double panes of your windows, leaving your home exposed to the elements. Although a window that is cracked can be difficult to repair however, you don't have to have it replaced entirely. In fact the insulated glass between the two panes remains in good shape and you can fix your double-pane window using some DIY effort.

You'll first need to remove any broken glass from the frame. You'll need to be careful to keep glass shards from falling onto the floor or sliding out of the frame. Use a pair of gloves to shield your hands from injury and a cloth to cover the area around the broken glass to avoid further damage or breaks. After removing the broken piece take care to clean the entire frame of the window to eliminate any remaining sealant and debris. It is important to smooth rough areas of the frame to create an even surface for your new glass.

After cleaning the frame and removing the dust, you can apply another layer of glass to the area where you removed the broken pane. This is the most effective way to keep your window secure and sealed, and it will aid in reducing energy costs by preventing drafts and water from entering the house. The next step is to choose the material for your glazing. There are a variety of options, including clear tape, which is a bit more durable than regular tape and will keep your window secure from further cracking, as well as glazing film that is similar to clear plastic wrap. The benefit of this type of material is that it can be painted to match your frame, and it will keep out rain and snow too.

Whatever material you choose, it is important to press glazier's points into the place where the putty joins the frame. They will help keep the glass in place and will help it stick to the frame. Hardware stores carry glazier's point ropes that you can use on the frame rabbets.

Condensation

If you have a problem with condensation, it's best to call your window manufacturer. A lot of windows come with warranties and guarantees to address these problems. Condensation or fogging between the windows' panes is a sign that the seals are damaged. Only a professional can resolve this issue by replacing the panes.

It is a tricky process that requires special tools to remove and replace the old window. A professional can handle this task and provide the equipment. It is best to leave the work to an expert. These tools can be dangerous.

If you choose to do this yourself, be sure to wear gloves and safety glasses to protect yourself from any broken glass pieces that could fly off during the process. It is also important to remove all the putty and metal glazing points from the grooves that the new window will go. It is also recommended to wire-brush the frame and vacuum or wipe with a damp cloth. When the frame is clean and dry you'll need to purchase a replacement glass which is 1/8 inch less in each direction than the window, and then test it in the grooves.

Based on the frames you have, you will then need to apply a layer of silicone caulk to the grooves in order to ensure that your new pane is securely in the right place. Once the caulk has dried, you will need to smooth it and make any needed adjustments. The wood molding can be put back in place.

Double glazed windows can become difficult to open or close in the event of extreme weather. Extreme temperatures can cause frames of double-glazed windows to expand or contract, which causes them to sag and stick. If this is the problem you could try wiping the frames using water and lubricating joints. However, it might be best to ask the company that installed your windows to help.

Misted

When moisture gets trapped between the glass panes, it can cause misty double glazing. Double glazing consists of two panes of glass which are separated by an insulating space typically filled with argon gas to provide better thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside and allows you to keep the temperature comfortable in your home.

The seal may be damaged over time, and moisture can build up between the glass panes which can cause them to turn misty. This happens because the space between the panes is heated by sun, which causes water vapour to develop in it.

This is a natural occurrence however, if it happens between the windows' panes it could cause problems because it won't be able control the temperature within the room. Instead the temperature outside the window will influence the temperature inside. If you notice that your double glazed windows are becoming misty, call in the experts at Northfield Glass to investigate.

We can replace a single blown sealed unit without the need to replace the entire window. This is much more streamlined than a total replacement. Our misty window repair involves removing the glass, cleaning it, and then replacing it with a new one to make an airtight seal.

Some companies in the industry claim that they can inject chemicals through holes drilled into windows with mist to remove the fog and condensation. We do not recommend using this method. This is not only unattractive, but it could cause damage to the toughened glass and result in a window that does not completely perform its function.

It is essential to address the issue as soon as possible, as left untreated, it could cause mould growth which can not only damage the window but also poses health risks to your family. The condensation in the window could cause other issues within your home like damp or rot. In some cases, it may be necessary to replace the entire window.

Blown or failed

Modern double-glazed windows feature two glass panes, with an inert gas or air between them. This improves their thermal efficiency by keeping heat in and the cold out. Over time, this gas may depressurize which can lead to a range of issues.


One of the most frequently encountered is condensation occurring between the panes. Although it's a normal occurrence and doesn't mean that your window is damaged however it could be a sign that you need to re-seal your windows. Condensation could also be an indication of broken double glazing, which will require a re-installation.

Double-glazed windows may also cause draughts. This could be caused by a failure of the seal or a damaged handle lock. It is crucial to address this problem as soon as possible. A draft will force you to pay more for heating. You can test the seals by feeling around the edges of the window frame to see if you feel any cold air.

Another sign that your window seals have failed is when you begin to notice water beads on the inside of your windows. This is a sign that you will need to replace the seals on your double-glazed windows.

The frames of your windows are designed to move a little bit, as they need to do to keep the glass sheets in the right place. However, over time this special packaging material can become compacted and this will cause the seal to break. This will allow the air to flow between the panes, reducing the efficiency of your window's energy consumption.

A blown seal is a clear sign that your double glazing has failed and must be fixed as soon as possible. A damaged seal can stop your double glazing from fulfilling its primary job of keeping the cold out and warm in. Additionally, a blown seal can let moisture in, which could cause mold and other unpleasant conditions. Contact a double-glazing specialist when you notice a blowing window seal. They can repair or replace the entire unit.