Ten Things Your Competitors Lean You On Key Repair Auto Key Repair - Common Problems With Car Keys

The car keys often break at the most inconvenient times. These issues can be caused by a number of reasons and are often difficult to fix.

To avoid this happening to you, implement strategies like lubricating your keyholes and having spare keys. Also, keep car key repair shop near me out for signs that your car key needs to be replaced.

Ignition Cylinder Issues

The ignition cylinder is a complicated mechanism that has many tiny elements, and it's common for these parts to wear out over time. If this happens, the key might not fit tightly in the ignition, or it could not rotate. If not taken care of, the issue could become grave and result in the engine shutting down while you're driving. Locksmiths can fix these problems.

The most frequent sign of ignition cylinder problems is that the key won't turn on the ignition. This is due to the tumblers within the cylinder wearing out and causing it to be hard to fit the ignition key in. You may have to play around with the key until it turns. Usually, this issue is fixed by applying a silicone spray or graphite lubricant to the key and inserting it into the cylinder.

You can tap the cylinder using the screwdriver's handle. This is a great method of resetting your tumblers, and without damaging the ignition cylinder or your key. But, you must make use of a mallet made of rubber or the screwdriver's handle to tap the cylinder, and avoid using excessive force.

Another possibility is that you're using a wrong type of key for your vehicle. Different car manufacturers have unique key profiles and security features, and using the wrong key can prevent it from fitting into and turning the ignition cylinder properly. Verify whether the key hasn't been damaged, as this can interfere with its ability fit into the cylinder and turn it. Consult your car's manufacturer for assistance if you're unsure sure what kind of key you should purchase.

Bent Key

It might seem like bent keys are not useful however this isn't the case. It's still able to open the lock, but not as quickly as it would if it was straight. A bent key is a sign of flexibility, adaptability and the willingness to work with what you have. It encourages you to embrace resilience and to seek more understanding of the many complexities of life's twists and twists.

You can straighten your own car key by using pliers for the other end and then bend it back to its original position. But this is just a temporary fix and the key could be dislocated again soon afterward. It's best to contact an expert locksmith to repair the key as soon as you can.

A skilled locksmith can usually fix a bent key, but it will depend on the severity of the damage and how clear the cuts are on the key. In some instances, a key may have to be replaced completely. In these cases, you'll want to ensure that you have a spare key in order to return to your vehicle in the event that the lock is damaged in the future. It is also a good idea to ensure that the key is cut correctly, so that it fits the lock and the ignition cylinder. This is especially crucial for Ford keys where the blade is separated from the body. These keys are typically difficult to accurately cut.

Issues with Gear Selectors

Your Mercedes-Benz is a top-performing vehicle that is expected to respond in a timely manner when you shift gears. If it shakes or shifts speeds during shifting, your transmission might be in trouble and should be checked right away. The gear selector, a small component of your transmission, can be difficult to diagnose but is vital for your car to function in the way it should. A malfunctioning selector can cause your car to shift into a wrong gear, which can result in costly damages to the transmission.


The good news is that a lot of Mercedes owners can avoid problems with their gear selectors by taking care of their vehicles properly and scheduling routine maintenance. These steps can stop dirt or debris from entering the gear selector which is the main cause of a bad gear selector.

Gear selector issues can include problems moving through positions, failure to lock or even a clunking sound when you shift. These issues are typically caused by mechanical issues that require a professional diagnosis.

The most common cause for gear selector issues is that the clutch in your transmission is worn or damaged. This can lead to the gear selector not being able to select the correct gear, and your Mercedes shifting into the incorrect gears. To avoid this issue it's recommended to regularly schedule maintenance with our team of expert mechanics. car key repair shop near me will allow us the opportunity to detect minor issues before they turn into expensive problems for your Mercedes. It's also a good idea for your Mercedes to use high-quality transmission oils. This will ensure that your engine and transmission aren't getting too hot, which could cause issues with the gear selector.

Dead Battery

If you turn your car's ignition but it doesn't begin, there is a good possibility that the battery is dead or dying. You'll need to replace a battery that is completely dead and cannot be charged. There are ways to revive and restore an old battery to its full strength.

One of the most efficient methods to fix a dead battery is to jump it using another vehicle that is operating. This process uses a pair of jumper cables to supply power to your vehicle. Make sure to shut off the ignition in both vehicles. Also, connect the red (positive) cable from the battery of your vehicle to the positive terminal of your dead battery. Then connect the black (negative) cable from the battery in your vehicle back to an unpainted metal area as a clean bolt on the vehicle to ground it.

Another option to fix the battery that is dead is to recharge it using charger. This is typically done with the 12 volt lead acid battery. However, if your battery is more than 3 years old it may have experienced an unnatural process known as sulfation which could cause it to become permanently damaged.

Sulfation happens when the negative plates of your battery develop a sulfate-crystalline layer which reduces their capacity to receive and transmit electricity. This is a relatively easy procedure that can be accomplished with a basic charger and some common household items. To complete the task you'll require safety goggles and rubber gloves, as well as a battery charger and jump starters, a voltage meter and an apron.

Ignition Socket Problems

A key that won't turn on the ignition socket can be extremely frustrating. There are a variety of solutions to this issue.

First, check to make sure there aren't any obstructions within the cylinder. Use a flashlight to see inside the cylinder, and then remove any obstructions. Spray some penetrating oils through the keyhole in order to make the damaged piece easier to remove. You should be careful not to spray the oil on any electronic components.

A tack hammer can be used to tap on the ignition switch to loosen the pins. This will allow them to drop into the switch, allowing you to turn and insert your key. You could damage the switch or other components when you hit it too hard.

If you are still having trouble turning the key it could be the right time to contact an expert. Forcefully trying to turn a broken key can cause further damage and even damage the cylinder of your ignition. Fortunately, professional automotive locksmiths are well-versed in the right tools and techniques for extracting broken keys without further causing damage to your vehicle.

If your car's key does not turn when you start it, the reason is likely to be due to a variety of common issues. Examine the steering wheel, gear selection and battery before calling in an expert. If you're unsure about any of these steps, check your owner's manual to find specific directions or contact an expert. A professional can evaluate your situation and give you the best advice. They'll also be able identify any other issues you could have with your car key or lock.