Then You've Found Your Double Glazing Door Lock Repairs ... Now What?
Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism started to fail? Maybe the window or door handles aren't able to connect correctly or are difficult to use.
You'll lose energy if your double-glazed doors don't work properly. This also increases the likelihood of burglaries. Owen the Locksmith will be able to repair your door lock at reasonable costs.
Snapped Key
It can be quite frustrating when a key snaps into the lock. It can also be a security issue in that it can make you vulnerable to burglars if your door is not locked. Fortunately, there are quick fixes you can try to resolve the issue and get your door operating properly once more.
The first step is to remain calm. If you panic and begin doing a lot of fumbling around you could end up pushing the broken piece of the key deeper into the lock, thereby making the situation worse.
Spray WD-40, or any other penetrating lubricant, into the lock. This will help the broken piece to emerge more easily. You can also use a screwdriver to help break up any pieces stuck that could be hindering the flow. If you have a chunk of the key still sticking out then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these handy, you can use needle-nose pliers that bend to create hooks. Also, a pair tweezers can be used to grasp and pull out the remaining part of the broken key.
If you're unable to pull the broken piece of key out, you can try using a lock de-icer. It's available in many hardware stores and works by freezing any moisture that may be present in the lock.
If none of these solutions work, it might be time to consult a locksmith. Fitlocks specialists are able to quickly solve problems with uPVC door mechanisms and locks such as snapped keys and broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. Get a double glazing repair through us online or give us a call to discuss your requirements.
Broken Cylinder
A damaged cylinder could pose a major security risk. A locksmith professional can fix the cylinder. To fix the cylinder locksmiths will need to tap it. This can be accomplished with the hammer or other tool. However, the most effective method is to make use of a wire or a long match. Then, position the match's end or wire close to the keyway. The locksmith can then strike the lock to crack it. This is superior to using a hammer that could cause damage to the lock.
The most frequent cause for cracks in the cylinder head is overheating. This can happen when the cylinder block and head are made from different metals, including cast iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.
Corrosion can be a reason for cylinder fractures. If the head and block of a cylinder are not maintained correctly they may be corroded or rust, which can cause them to expand more than anticipated. In time, this could also lead to cracks.
If your uPVC window or door lock is stiff or requires lots of pressure to turn, this can be caused by a number of things. A faulty locking mechanism, misalignment, or an old handle are the most common reasons for this issue.
Fortunately, this is an easy and affordable fix for the majority of homeowners with double glazing. A professional locksmith should be able solve this problem within an hour of arriving at your property. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes based on your particular requirements. A professional locksmith will always be able to advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which give you an extra layer of protection from burglars. This is a small cost to pay for the peace of mind that comes from knowing your uPVC doors are safe.
Broken Handle
Window handle locks have complex mechanisms that become less effective as time passes and use, so it's no surprise that they sometimes break. If yours fails, it can be difficult to pinpoint the cause of the problem and make sure that you repair it correctly.
Fixing your broken handle, regardless of whether it's the internal latch or the locking mechanism can increase the security of your uPVC door and stop draughts. Incorrectly repairing or replacing the handle could be costly and may damage the door's frame and lock, so it's worth taking the time to do it right.
Screwdriver Open the window remove the screw that holds the handle. It should be located on the inside face of the back plate, and is normally concealed by an attractive cover for the screw for aesthetic reasons. It is important to not be able to replace any internal parts of the handle, such as the levers and plates on either side. Ideally, keep these in the same place so you can replace them again if needed.
Then, rotate the handle so it's at 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that holds it to the internal spindle by using another screwdriver. Once the screw is loose, you should be able to pull the handle away and pull off the damaged spindle. Replace it with a brand new spindle, making sure it's the same length (you can find them online or at hardware stores). Screw it in the frame. Don't over tighten the screw as this can cause damage to the handle and window frame.
Ensure the new handle is correctly installed after which you can close and test the handle. The hope is that it will function smoothly and you'll be able to open your window once more.
While you're working on the handle, don't forget to ensure that your uPVC windows are shut correctly. If they don't close properly, you could experience damp or draughts in your home. You could also compromise the energy efficiency of your home.
double glazing repairs , like Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they are able to shut properly.
Broken Spindle
It is quite common that the spindle inside the handle is broken, not the handle itself. This is particularly common in uPVC tilt and turn windows. These types of windows require a handle that acts as a locking mechanism within the window frame. The handle is attached to a central rod that triggers the cams with a mushroom shape that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle is turned, it's likely the spindle is damaged. This could be a frustrating issue.
Fortunately, there are steps that can be taken to fix this problem. A reputable locksmith will be able to quickly and effectively fix this issue. They can remove the window handle using a tool to remove the wheel part of the mechanism where the spindle is. This can be done with no damage to the handle or the window frame.
Once the wheel is removed, the technician will inspect the spindle to determine what has caused it to break. This involves disassembling the spindle and examining each component, noting any wear or damage. This procedure is typically performed by technicians in a clean environment.
Next, clean the damaged spindle. This will help get rid of any dirt or other debris that may be obstructing it from working normally. The spindle could be replaced or repaired. If it is being replaced the technician will need a dowel of a similar size to the original and drill mating holes into both pieces of the spindle. This will ensure that the new spindle has an exact fit with the handle.
If the damaged spindle can't be repaired, it might need to be replaced entirely. Home centres sell generic replacements, but if the style of your window is unusual then you will need to find a woodworker or cabinet maker who can replicate the exact component for you. Once the new spindle has been installed it can be positioned to the handle by line up the screw holes on the handle with the frame's existing screws. Once the new handle is firmly in place, you'll be able to operate your uPVC window.