What Will Double Glazing Door Lock Repairs Be Like In 100 Years? Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows or doors aren't aligned correctly or are difficult to operate.

It is essential that the double glazed doors function smoothly, or else you'll lose energy and increase the likelihood of burglary. Owen the Locksmith will be able to repair your door lock for an affordable price.

Snapped Key

If a key breaks within a lock, it can be extremely difficult. It could also be an issue for security, since the door may not be locked and leave you vulnerable to intruders. Fortunately, there are quick fixes that you can use to solve the problem and get your door working correctly.

Keep calm. If you panic and start playing around with your keys you may end up pushing the broken piece of the key even further into the lock, which could make the situation even more difficult.

Next, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you're lucky enough to have a small piece of the key left hanging out, you can make use of a paperclip or other thin metal object to grab it and pull it out. Both methods work, but be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that can be used as a hook extractor and some Jigsaw blades can also be used for this purpose. If you don't happen to have any of these you can bend a hook with needle-nosed pliers. Additionally, you can use a pair of tweezers grab and remove the last bit of the broken keys.


If you are unable to remove the broken key piece then you can use a lock deicer. This is usually found in most hardware stores, and it works by freezing any moisture or ice that might be inside the lock.

If none of these solutions seem to work, it could be time to contact a locksmith. The experts at Fitlocks can quickly resolve issues with uPVC door mechanisms and locks, including snapped keys and broken handles. They can also alter the double glazing door mechanisms so that they are more easy to operate. Request a repair for your double glazing through us online or give us a call to discuss your requirements.

double glazing repairs damaged cylinder poses a serious security threat. A professional locksmith is able to fix the cylinder. To fix the cylinder, locksmiths must tap it. This can be accomplished with a hammer, or any other tool. However, the best method is to make use of a wire or a long match. Place the match or wire's end in the keyway. The locksmith can strike the lock to crack it open. This is far better than using a heavy hammer that could cause damage to the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made from different metals, such as cast-iron or aluminium. Different metals can heat up and cool off at different rates. This could cause localized hotspots to expand quicker than the rest of the cylinder.

Another possible cause for cylinder cracks is corrosion. If the cylinder head and the block of the cylinder are not properly maintained, this can result in corrosion or rust and cause them to expand at a more than they should. As time passes, this may also cause cracks.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn it could be due to a variety of reasons. A faulty locking mechanism, misalignment, or an old handle are the most common causes of this issue.

It is a quick and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith should be able solve the issue within an hour after arriving at your residence. Depending on the needs of your home they can change the locking mechanism, change the window handles, and also change the gearboxes. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective solution for your home. They can even suggest upgrades to 3 Star security TS007 euro cylinders that will give you an additional layer of security against burglars. It's a small amount to pay for the peace-of-mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not a surprise that window handle locks can break. They have intricate mechanisms which deteriorate over time. If yours breaks it may be difficult to determine the source of the issue. Make sure you fix it properly.

Fixing your broken handle, whether it's the internal locking mechanism or latch can increase the security of your uPVC door and stop draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and could damage the door's frame and lock, so it's worth taking the time to do it correctly.

With the window open and the window open, loosen the screw holding the handle by using the screwdriver. The screw should be located on the inside of the backplate, usually concealed by a screw cap for aesthetic reasons. Be careful not to damage any of the internal components inside the handle, like the plates or levers on either side of the spindle. Ideally, keep these in the same place so you can re-install them if needed.

Then, using another screwdriver take the screw off that holds the handle to the spindle on the back. Once this is released, you'll be able to pull the handle away and pull out the broken spindle. Replace this with a new one, making sure that it's the same length as the old one (you can usually find these online or in hardware stores) and securely screw it into place. Do not tighten the screw too much as this could damage the handle and the window frame.

Close the handle and try it. It should function smoothly and you'll be able open your window once again.

While you're working on the handle, make sure to make sure your uPVC windows are shut correctly. If they don't cause draughts and damp in your home, as in addition to compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the window frames to ensure that they close correctly.

Broken Spindle

It is more likely for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that acts as an locking device within the window frame. The handle is connected to a centre rod that triggers a set of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle is broken and this could be a very frustrating issue.

Fortunately there are steps that can be taken to rectify this issue. A good locksmith can quickly and efficiently solve the issue. A good locksmith can disassemble the handle of the window by using a tool to remove the wheel part where the spindle is located. This can be done without causing any damage to the handle or causing other damage to the window frame.

After the wheel has been removed the technician can then inspect the spindle to determine what caused it to break. This involves breaking down the spindle into its individual parts and meticulously noting their general condition as in addition to any specific areas of damage or excessive wear. This procedure is typically carried out by technicians in a clean environment.

The next step is to clean the damaged spindle. This will remove any dirt or other debris that might be obstructing its normal function. The spindle could be repaired or replaced. If it is being replaced the technician could use the dowel that is similar in size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle is perfectly matched with the handle.

If the spindle is damaged and cannot be repaired, it could require replacement. Home centres sell generic substitutes however if your window style is rare then you'll have to speak with an expert in cabinet making or woodworking who can make the exact piece. After the spindle is installed, it is fixed to the handle. Line up the screw holes on the handle with the screws that are already in the frame. Once the handle is firmly seated, you can operate your uPVC windows.