14 Misconceptions Commonly Held About Car Keys Cutting Car Keys Cutting

Car keys cutting is a process that gives car owners a backup key in case of a lost or damaged original. It requires specialized equipment and a variety of key types.

When choosing a company to cut your vehicle keys, it is important to be aware of the types of keys cutting techniques, methods of cutting and pricing.

Key Blanks

The first step in cutting car keys is choosing the right blank. Key blanks are available cut or already cut. Pre-cut keys are typically slightly more expensive since they are ready to use immediately. They are more precise however, since locksmiths have already traced your existing key onto the blank.

Whatever the kind of key blank used regardless of the type of key blank used, locksmiths will require cutting notches and grooves into it to make sure that it matches with different types of pins and wards in locks. The various forms of grooves and notches are created by a variety of methods, including disk-type key cutters, pin machines, or even a file. Locksmiths may also decide to employ the rotary cutter in place of an pinning or warding machine to make faster, more precise cuts.

After the blank has been cut, it is tested inside a lock to make sure that all of the pieces fit properly. This is known as "biting" the blank. The bow and shoulders of the key are shaped in order to determine if the key is able to be used with a lock, and if it's the correct size. The form of the bow is often marked with the manufacturer's name or logo to make it easy to identify and enables you to find similar keys that are suitable for duplication.

The majority of residential key blanks are made from keys made of cylinders that have notches and grooves for different pin chambers. The Yale pin tumbler was invented over 150 years ago and is currently the most popular. It offers much more security than other locks of the time however it requires a smaller key. Cylindrical keys are utilized by virtually all locks that are manufactured with high-quality padlocks, office supply locks, automobiles, and door locks.

Certain key blanks have distinct imprints to prevent duplicates. For instance, a key ring stamp or "Do not duplicate". Locksmiths must obtain a special authorization to distribute specific keys that are protected from duplicates that are not authorized. Other keys are restricted by key manufacturers and cannot be sold or distributed.

Key Cutting Machines

If you're a locksmith and you need to have the right key cutting machine is essential. These machines will enable you to swiftly and efficiently cut duplicate keys for customers. Key cutting machines use a stylus to trace out the form of an existing key, and then cuts it with a blade to create duplicate keys. Key cutting machines can be used to cut various key types including house keys, car locks, skeleton keys, and Yale locks.

The best key cutting equipment will come with multiple attachments that can accommodate different types of keys and cuts. This allows you to provide various services to your customers, and can save you time and cost on replacement keys. The rotary key cutter that is capable of cutting most types of keys, is the most common key cutting machine. A Rotary cutter is a machine with two blades rotating to cut both sides of a key at once. cost of car key cutting 's an efficient and cost-effective tool.


Electric key cutting machines can also be controlled via a computer. These machines are ideal for auto locksmiths who want to streamline their business processes by removing the need to manually enter key codes. They are also more durable than manual counterparts and can be updated with new software updates as they become available.

A key cutting machine that is electronic can be programmed to create duplicate keys for certain models of automobiles. This is accomplished by connecting the machine to a database online that contains all of the information needed to create duplicate keys. cost of car key cutting is stored within the machine's operating system, and the system can be used to cut all of the required cuts for a specific model of vehicle in just a few minutes.

Key cutting devices can be purchased as an individual device or integrated into an app for mobile that makes it easier for the user to use. For instance the Futura Pro Auto is an electronic key cutting machine equipped with a tablet that provides step-by-step guidance. The tablet can be paired via Wi-Fi to the machine, or directly tethered. This feature makes it easy to learn how to use the machine and allows the user to make new key cuts without needing to replace the jaw assembly.

Key Fobs

Many modern cars require key fobs to lock and unlock the doors, or to start the engine. The key fob may also have buttons that allow the owner to access the trunk remotely or even the windows.

Most modern car keys are fitted with an RFID transponder that can read the codes stored in it, which allows the vehicle to identify and communicate with the key fob. The key fob sends out radio signals to the receiver inside the car, and it uses a combination of rolling codes and encryption to thwart the unauthorized access.

The car's computer then examines the signal from the key fob to determine whether the codes are compatible and if they do the car is then able to unlock or start the engine. This is why it's crucial for drivers to keep their key fobs in good working order.

You will need to bring the fob of your vehicle to the shop to ensure that it's properly programmed. The shop must follow the manufacturer's programming instructions which usually contain an exact sequence of presses on the key fob and a specific number of key turns when the ignition is turned. These instructions can be found in the owner's manual of the vehicle or on the automaker's website. It is important to follow them to the letter to avoid any errors.

In addition to the standard key fob manufacturers also have special models that include features like keyless entry, push-button start, and the capability to "summon" the car from a parking spot, similar to Tesla's summon feature. These fobs are usually slightly more expensive than the standard models however their added functionality may be worth it to some drivers.

If you require a replacement key fob the best thing you can do is to get it from your dealer. The majority of newer vehicles have fobs that must be programmed to work with the vehicle and requires a certain amount of expertise and equipment that the majority of dealers and locksmiths do not have. Examine your car's warranty and insurance policy to determine whether it covers the cost of purchasing a new fob before you purchase one from dealers.

Key Programming

The art of cutting car keys is more than just bending a piece. It's a process that guarantees safety, efficiency and peace of mind for car owners. When you're making your own spare or replace a damaged one, the process is complex and requires knowledge, skill and the proper equipment. You need to understand how it works to choose the best locksmith for the task.

There are a lot of different types of car keys, ranging from traditional metal blanks to key fobs. Modern keys come with transponders or a remote control chip which communicates directly with the vehicle. Auto locksmiths can also help programme these keys. These are specialized devices that read the code from the chip, and then transmit it to the vehicle. The vehicle will recognize it as an acceptable digital signature. This is similar to the way credit cards function and allows you to start your car.

A basic key made of metal is usually made by your local hardware or locksmith store. However, modern key fobs can be more complex and require a special kind of software to be programmed. They are less likely to be duplicated at Home Depot or other hardware shops, and should only be done by an automotive parts department or locksmith.

Special tools allow the dealer to identify the ID code of your key directly from the ignition module. They can also extract the PIN code (depending on make) from the modules. The information is then used to program the new key. This is a more complicated method however, it will help you save money.

Many locksmiths are experts on particular car models and have the software and equipment to complete the job correctly. They can also provide you with an entry code for your key to get your new key working in the shortest time possible. This is a great option to avoid the full price for replacement and to have your key functioning quicker than waiting for the manufacturer to process the request.