9 Lessons Your Parents Taught You About Double Glazing Lock Repairs Double Glazing Lock Repairs

Quality locks on your doors and windows will stop burglars from getting into your home. They don't usually like to break glass or try to squeeze through windows.

However, some double glazing owners have had problems with their door or window lock after it was installed. Luckily, these problems are often fixable without having to purchase new double glazing.

Broken or damaged locks

If your uPVC window or door lock is damaged or broken or has a problem, a locksmith will fix it. They can repair the striker plates, hinges, and locks on your double-glazed. They will also be able to move the cylinder around to fix any misalignment issues which could cause your handle to not operate properly.

If the key fits in the lock but doesn't turn or is difficult to insert the mechanism might be locked up. Dirt or grease can be trapped in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate. Use a dry lubricant like graphite or Teflon, not oil, because oil can attract dirt, and cause it to stick to the mechanism's inside. After the lubrication, insert the key into the lock and turn it. The lubricant will work through the mechanism, and the lock should be able turn with ease.

Loose screws within the lock mechanism are a different reason for a broken lock. They can become loose, fall out, or even break off completely, preventing the lock from being able to function properly. A screwdriver can be used to tighten these screws, but care must be taken not to tighten them too much, because this could damage the internal components.

A faulty lock is dangerous for your family and you. This is particularly true if you have small children. They can easily unlock the door without knowing which gives them access to your house. If you're concerned that this might occur, a licensed professional locksmith can help you secure the double-glazed doors.

double glazing repairs are a professional uPVC and double glazing company based in Lancing that can fix all kinds of damaged and damaged mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, meaning that in a lot of cases replacement windows and doors are not required.

Handles that are broken or damaged

As part of their overall security package, most double-glazed windows feature a multipoint lock. This is an excellent option for those who are concerned about potential burglars trying to gain entry into their home. Ask your installer about antilift blocks. These can be installed as an addition to the existing locks and ensure that your windows are securely closed.

Handle locks can be damaged or fail. They are the first component that criminals will use to force open your window. The good news is, this is one of the easiest parts to fix.


Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to withstand forced entry. This security upgrade is available as an option for new uPVC windows. Older style uPVC and aluminum handles can be upgraded to shoot bolt locking systems, again as an optional extra on new double glazed windows.

It is essential to fix handles as quickly as possible if it is damaged. Handles that are damaged can prevent the window from closing properly and letting in a draft. It could also be a vulnerability that thieves who are opportunistic could exploit and put the belongings of your family and your personal belongings at risk.

To repair the broken mechanism, you first need to gain access to the window frame and remove the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified, so that a replacement may be found that matches the profile of internal window frame mechanism.

Once the mechanism is replaced the handle can be re-attached with the original screws - however, we generally recommend replacing them with larger ones since this will provide an even more secure fit. The final step is to seal the handle with an opaque sealant. This will help protect it from further deterioration. After this step is completed your window will be fully functional again at a fraction of the cost of replacing it.

Hinges that are broken or Faulty

If your windows do not close properly, you may suffer from draughts or the weakening of your home's security barrier, and an increased chance of damp or water damage. Broken or damaged window hinges are a typical problem that can be fixed easily.

If your uPVC windows don't open or close it's likely that hinges need to be repaired or replaced. Most window companies will require you to buy an entirely new window unit to address this problem, but we can replace the hinges to save you money.

Window hinges are usually damaged through repeated use, or weakening over time due to corrosion. If you have a broken window hinge, it is crucial to take the necessary precautions to avoid further damage. This means not causing the window to close or open.

You can find the right parts for your hinge by identifying its type. Common kinds of window hinges include Maco, Mila, Roto and a variety of other brands. It is recommended to consult an expert in this situation so that you don't make the mistake of buying parts that are not compatible with your existing hardware and could cause further damage.

Faulty hinges can be a major issue for your uPVC window and doors. They can be a significant source of noise and also allow water infiltration which could damage your windows.

To fix this issue, first make sure that the pin barrel on both hinge halves is aligned. If it's not, tap the headpin with the hammer to make a slight bend in the hinge barrel. This will help keep the pin in the right position. A friend can help you hold the doors while you take out hinge screws and hinges. Replace the hinges with those of a matching size and then attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue dries.

Once you have repaired the hinges, you can install the door again. You can also attach the handle. Replace the screws with wooden dowels that are the same length as the original screw to ensure that they match.

Broken or faulty glass

uPVC Windows can be damaged over time, despite the fact that they are excellent at keeping cold out and conserving warmth. This can be the case with broken or damaged glass as well as damaged locks. This is an issue that could be extremely costly if not addressed. It can also affect the aesthetics of your house and can lead to loss of insulation, so it is essential to fix any damage as quickly as you can.

You can fix your cracked glass yourself if you have the right tools and techniques. Make sure the area around the glass that has been broken is free of debris so that any pieces of glass do not cause injuries or cause a trip hazard. Remove any broken glass pieces and dispose of them in the proper way. Apply masking tape over the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to adhering it to the wall is an ideal option if you are dealing with windows with two panes. This will ensure you have enough space to finish your project.

Before applying the glue, wipe the surface of the broken frame and the glass with a a dry, clean cloth. Follow the curing and application instructions, which may vary from product to product. You may need to clamp the glass that has cracked with lightweight clamps designed to hold fragile materials, depending on the angle.

Once the adhesive has fully set, carefully place the glass inside the window frame. Make sure that it is in line with the frame edge and that there aren't any gaps between the glass sash as well as the frame. Be cautious not to flex the window while it's reinstalled, as this can weaken the seal and cause condensation and water infiltration.

Contact a professional glazier, such as O'Brien(r), to arrange a replacement if your glass window is completely shattered. It's important to act quickly when you notice broken glass.