Think You're Perfect For Patio Screen Door Repair? Check This Quiz Patio Screen Door Repair - How to Do it Yourself

A damaged or worn screen door is not just unsightly; it provides an ideal entry point for flies, mosquitoes, and other pests. While there are services that can repair your patio screen door, it is relatively easy to do the job yourself.

Lay the screen flat on a surface. Remove the handle from the screen by removing the screws holding it in the position.

Damaged Screens

Between the weather, pets and kids, it's no surprise that holes and tears will eventually appear on your window or door screens. These damaged sections are not only ugly, but also allow pests and flies in your home. The good news is that fixing the problem is fairly easy. While patch kits and screen repair tape provide a quick fix for minor damage, they aren't suited to larger problems. This step-by-step guide will explain how to replace and repair your doors and windows.

The first thing you need to do is assess the damage. Can you salvage the frame, or will it require replacement? It is important to take into consideration this because the frames of window and door screens are more likely to be damaged than the mesh. A bent frame can cause the screen to move out of alignment, which can result in holes and weak areas in the mesh.

If you are able to determine if the frame is salvageable or not, you can start working on the mesh itself. You'll require a few essential tools to complete this task. This calls for a spline roll pressing the spline into the frame, an utility knife and a pair of scissors. These tools will ensure accuracy and durability when you make repairs.

If you have a large hole, begin by cutting away as much of the old screen as is possible to create a clean opening. Cut an entirely new screen material that is at least half an inch wider in all directions than the damaged part. If your window has grid patterns, be sure the patch is in line with it. Finally trim the edges of your patch to eliminate any imperfections and fold them over the top of the spline in order to hide them.

When you are purchasing a replacement screen, you should take into consideration the climate of your area. Aluminum screens are durable and resistant to snags, while fiberglass mesh is popular for its affordability and flexibility. You might also opt for a specialized insect screen mesh if your area is plagued with mosquitos and other insects. Whatever kind of screen you choose make sure you stretch the material tautly over the frame to prevent sagging and wrinkles.

Broken Rollers

A damaged roller on the screen door to your patio can be a harrowing issue. Not only does it make the process of sliding your door more difficult and difficult, but it could also allow insects and other pests to get into your home. The good news is that repairing the rollers isn't as difficult or expensive as replacing your entire door.

Begin by looking at your rollers to determine the issue. You may find that the wheel has flattened or worn out on one end due to the constant contact with the track. Try to remove the wheels by putting an screwdriver between the roller and the bracket. If you are unable to get the roller to come off, it might be beneficial to spray the shaft with WD-40 before trying again.

It's also a good idea to take a look at the tracks, both at the top and bottom. If they're bent, you can straighten them by holding a block of wood against the bent part and rapping it with the hammer. It's essential to clean the tracks, as well as they could hold sand and grit.

Once you've identified what kind of roller that's broken, you can purchase a new one. Make sure to bring your old rollers to the hardware store to ensure you purchase the right type. If your door has more than one roller, you will need to buy enough to replace all of them.

Before installing the new roller using a screwdriver, loosen the adjustment screws or bolts on the inside of the frame near the door rollers. Once the screws have been loose, you can take the rollers from the bottom. It is best to have a person help you with this step to unwind your hands and focus on getting rid of the rollers.

Once the new roller is installed The door can then be raised and the bolts or screws that adjust can be tightened. Make sure to verify the alignment of the rollers as well as the track, too. If everything is properly positioned your patio screen door will slide easily into its place.

Damaged Frame

There are several ways you can repair the screen door that is that is rubbing against its frame. First, make sure that the hinges are in good condition. In the event of loose hinges, it could cause doors to become stuck, which means it will stop when you open or close the door. If they're loose then tighten the hinge screws. If this does not work, you might need to sand the top of the frame.

A rotting frame is a frequent issue with screen doors. It is costly to fix as the frame will need to be replaced. To avoid this, keep a lookout for signs of rot and address them when you spot them. Look for signs of decay by looking for wood that appears darker than the rest of the frame. Be aware of any areas where the wood is beginning to bow or warp. Contact a professional if detect any of these problems.

A mesh adhesive patch kit can be used to repair a damaged frame. These kits cost between $2 to $7. The kit includes a small piece of mesh and glue, which you can use to fill any holes in your screen. If the damage isn't too severe, you can try to repair it using wood filler. To do this apply the filler to the area that is damaged, wait for it to dry, and then sand it smooth.

If you want a solution that is more permanent you can purchase frame lifts, which is a metal structure that bolts onto your frame and raises it up. This can be very expensive however it could be the best choice if your frame is severely damaged or is completely rotted.


To make a simple stand for your screen door, you can create legs from a scrap piece of wood or a picture frame display stand. Attach wires or brackets to the back of the frame to hang the frame on the wall. You can also add a piece of felt on the bottom to protect the wall from scratches.

Broken Splines

A damaged screen spline can be as difficult to handle as damaged doors or frames. This may seem like an issue that is easy to ignore. If you leave it unattended for too long, pests like mosquitoes and flies can slip through. This could soon become a bigger problem and could cause more costly repairs or even a new screen door.

The good news is that replacing a broken spline is simple and affordable, especially in the event that you already have the equipment. First, you'll need remove the old spline for your screen door. This can be done by placing the screen door frame flat on any surface like a table or ground. Utilize a screwdriver to pull open the free end of the spline, and then pull it out. If the spline is extremely worn or brittle it could break when you try to remove it from the groove.

When RepairMyWindowsAndDoors removing the old spline make sure that you also remove any caulking that has been used to hold the spline in place. This will ensure that the new spline is properly fitted into the grooves.

Make use of a utility blade to cut the excess screen around the frame after you have removed the old spline. This will ensure a secure and straight fit across the entire frame when you install the spline.

Installing the new spline is easy once you have cleaned the frame and cut the new material to size. Start by putting it on one of the shorter sides of the frame. Lay the spline in place and then begin rolling it with your splining tool to move it into the screen channel. Continue rolling the spline, and pushing it into the screen channel as you move. Continue this process for each of the shorter sides of the frame. While you are working, use spring clamps or tape to ensure that the screen stays taut.

Once you have splined each of the short sides of the frame shift to the opposite side and repeat the process. Finish by splining both the top and bottom edges of the frame.