11 Methods To Totally Defeat Your Double Glazing Lock Repairs Double Glazing Lock Repairs


Quality locks on your doors and windows can stop burglars from gaining entry into your home. They usually don't want breaking glass or trying to squeeze through windows.

However, some double glazing owners have experienced issues with their door lock or window lock after it was installed. Fortunately, these issues are usually fixable and don't require to pay for new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window or door lock if it is damaged or is not working properly. They can repair hinges, striker plates and locks for double glazing. They can also adjust the cylinder in order to fix any misalignment that could cause your handle to work properly.

If the key fits in the lock but it won't turn or is difficult to insert, the mechanism might be stuck. This can be caused by dirt or grime getting stuck inside the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant like graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should work through the mechanism and the lock should be able to turn with ease.

A damaged lock can be caused by loose screws inside the lock mechanism. They can loosen and fall out or break completely and stop the lock from working correctly. These screws can be tightened using a screwdriver, but be careful not to over tighten them. This can damage the internal components.

A broken lock can be dangerous for you and your family members, particularly if you have young children. They can open the door without knowing which gives them access to your house. If you're concerned that this might occur, a licensed professional locksmith can help you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on uPVC doors and windows. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, which means that in most cases, replacement doors and windows are not necessary.

Handles that are broken or damaged

Many double-glazed windows have a multi-point lock as part of the overall security package. This is a great choice for those who are worried about opportunistic burglars trying to gain entry into their home. Ask your locksmith for antilift locks. They can be installed in addition to existing locks and help keep your windows firmly shut.

Handle locks are often damaged or fail. double glazing repair near me are the first thing criminals will use to force open your window. Fortunately, the good news is that this is one of the most straightforward parts to repair.

Modern handles made of aluminium and uPVC feature a multi-point locking system known as Espagnolette that is designed to withstand forced entry. This security upgrade is available as an option on new uPVC windows. As an alternative upgrade older style handles made of aluminium or uPVC that are no longer in use can be upgraded to a shoot bolt locking system.

It is important to repair handles as quickly as possible if it is damaged. Faulty handles can prevent the window from closing correctly and allow drafts in. It may also be a weak point that opportunistic burglars might exploit, placing your home and belongings at risk of being stolen.

The process of fixing the failed mechanism starts with gaining access to the window frame and removing the damaged handle. The gearbox is then opened to identify the type of gearbox used to open the handle. This will permit an alternative that is compatible with the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can be returned to the original screws. We recommend replacing them with more long screws to ensure the most secure fit. The final step is to apply a coat of clear sealant to protect the handle from further corrosion. Once that's done the window will be functional again, and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows do not close properly, you could be experiencing draughts, the weakening of your home's security and a higher risk of water or damp damage. Broken or faulty window hinges are a typical issue that can be fixed easily.

If your windows made of uPVC won't close or open and close, it's likely the hinges require to be repaired or replaced. While a lot of window companies require you to purchase a whole new window unit to solve this issue We can replace the faulty hinges and save you money.

Window hinges are usually damaged by repeated use or they are weakened over time by corrosion. If you've got a broken window hinge, it's important to take precautions to avoid further damage. This means not causing the window to close or open.

You can find the right parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all manufacturers of window hinges. Get advice from a professional before buying parts that do not fit into your existing hardware. This can cause more damage.

A faulty hinge is a major problem for uPVC windows and doors. They can be the main source of noise, and can also allow water to enter your windows.

Verify whether the pin barrels on both sides of the hinge are aligned. If it's not then tap the head pin using the hammer to create a small bend in the hinge barrel. This will keep the pin in its place. Then, ask a friend to hold the door as you remove the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges with those that are of the same size, and install the screws with glue. Finally, secure the hinges with clamps or weights until the glue is drying.

After you have fixed your hinges, you are able to install the door again. You could also reattach the handle. Replace the screws with wooden dowels of the same size as the screw that was used to ensure that they are compatible.

Glass that is Broken or Faulty

uPVC Windows can become damaged over time, despite the fact that they are great at keeping cold out and retaining the heat. This can include broken or damaged glass and faulty locks. This issue can be costly should it be left unattended. It can also hurt your home's aesthetics and cause a loss of insulation. It is important to repair any damage promptly.

If your glass is cracked but not shattered it is possible to fix it yourself using the right tools and methods. Make sure the area surrounding the broken glass is clear of debris so that any shards do not cause injury or cause a trip hazard. After that, take away all broken glass pieces and dispose of them in a proper way. Apply masking tape over the entire area. This will stop shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass it's a good idea fit the glass pane before gluing it back in place to ensure that you'll have enough space to finish the project.

Use a dry, clean cloth to wipe clean the surface of the broken glass and the frame prior to applying the glue. Follow the directions for application and curing which may differ from one product to the next. You may need to clamp the glass that has cracked with clamps made of lightweight materials designed to hold fragile materials, based on the angle.

After the adhesive has set, carefully place the glass inside the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Be careful not to bend the glass when you put it back in place in order to weaken the seal. This could lead to water infiltration or condensation.

Contact a professional glazier, like O'Brien(r) to arrange a replacement if your glass window is completely shattered. Leaving broken glass unattended can be a risk to pet and children and is why it's important to act fast.