10 Apps To Help You Manage Your Fix Window Handle How to Fix Window Handle Problems

If the window handle spins when turned or you can't open the sash to ensure it locks, the cause could be that the gears are worn out. If this is the case, you'll need to replace your crank mechanism.

Replacing a uPVC window handle is simple with the appropriate tools. It all starts with identifying the handle's type and determining the spindle that is running through it.

Remove the Screw Caps

After many years of use, uPVC window handles can become loose. This is usually caused by the screws holding the handle to frame becoming loose. If not checked, it could result in the handle becoming loose, and then falling off or breaking.

It's simple to repair your uPVC handle by following a few simple steps. First, remove the screws. This can be accomplished using the smallest tool, like a screwdriver or butter knife. Once the screw caps have been removed, it's the time to unscrew the top and bottom screws. It is important to remember that you should only employ a hand screwdriver to do this, as using a power tool can harm the handle as well as the frame.

Once the screws have been removed, it is time to take off the handle itself. The procedure for this differs slightly depending on the type of handle but is fairly straightforward. After the handle is removed, it is essential to make sure that you see the small square cut inside the window mechanism which houses the spindle for the handle. Also, at this point, that you must ensure that the length of the spindle for the new handle is compatible with the window mechanism.

It's worth noting that the majority of replacement windows come with a new handle. This makes it easy to replace a damaged handle.

If you are not confident in carrying out this process or are worried about damaging your double-glazed windows It is best to hire a professional. They will be able diagnose the cause of the broken handle and provide you with the best solution to fix it. They can even fit the new handle for you, if required. This will save you time and money and will ensure your window handles are properly fixed to the frame. This will help to avoid any future issues and will also help maintain the performance of your double glazed windows.

Unscrew the Screws

A window handle can get worn out, or the hardware that holds it in place may need to be replaced. If the window becomes stiff when you open or close it, it's an indication that it's time to replace the handle. It's not a big deal to replace the window even if it's your first time.

The window should be opened a bit and keep it open. This will prevent the handle from falling off the frame and causing injuries. Then using a butter knife or flat-headed screwdriver take off the screw caps. Once removed, put them in a safe place.

Use the window handle to hold it while you loosen the screws. If you do not want the handle fall and harm your windows or furniture Work in a secure location.

After you've removed the handle, you should be able to see where it was attached to the uPVC window sill. You might find a groove in the window guide track that you can use to remove it. If not, you can use a prybar to gently separate the window sill from the crank arm. Once you've removed your old handle, you can put in the new one.

Find the screw holes for the flange on the new handle with the screw holes on your windowsill. Slide the handle into position after aligning the notch of the crank arm to the middle notch on the window track. Finally, screw the new handle into its place using the screws from before and make sure they're secure enough to ensure that your window stays shut and secure. If necessary you need to replace the screws after the installation is complete. Check the window to verify that the handle functions properly. If it isn't then you'll need to tighten the screw fixings or replace the window handle completely.

Remove the Handle

The handle may make up a small portion of your window, but it has a significant role to play, in terms of functionality and aesthetics. Our uPVC handles are available in a variety of styles that complement windows and provide a distinctive touch to the decor of your home. Each design, from the PIXEL’s sleek square shape to the TBT handle, is carefully designed for you.

If you're having issues with your window handle, it's important to determine what the issue is. This will allow you to make an an informed decision about whether or not to replace the handle, as well as what type of replacement handle will be best for your window.

There are many things that can cause issues with windows handles. The first thing to determine is whether the handle fixings have come loose. If this is the case, use a screwdriver to tighten them.

Another thing to consider is whether or not the spindle inside the handle is damaged. You will need to replace it if it is damaged. This can be done by disassembling the handle and then removing the screw or pin that holds the spindle in the correct position.

The last thing to check is to ensure that the locking mechanism is working properly. If not, you'll have to replace the lock cylinder.


It is important to test the handle after it has been replaced to ensure it's working properly and that the lock is secured. This will help you identify any additional problems that require to be addressed, such as a stripped gear or a stuck window.

After completing the steps outlined in this article after which you'll have a new window handle that's both beautiful and functional! With the appropriate tools and knowing how to replace your window handle can save you time and money when it comes to renovating or repairing your home. If your window handle has become damaged or you're seeking to change your style follow this guide to begin enjoying your Everest uPVC windows.

Replace the handle

Window handles are not only a practical part of the mechanism that operates them they also visually connect your windows together through coordinated colors and designs. Having a mismatched handle can not only sabotage the aesthetics of your home, but it can also make the window difficult to open and close. If the handle on your window is damaged, it's crucial to fix it quickly. However, if the handle is damaged badly it's likely that it will need replacement completely.

Depending on the type of window, the mechanism of the handle will differ. For example lever handles make use of the lifting motion to open the sash, while cockspur handles work by twisting the handle to a vertical position. The style of handle you select will also depend on your personal preference and the design of the window. There is a handle to fit any preference, whether you prefer a sleek contemporary style or a classic timeless style.

A damaged window handle is a frustrating issue. It's simple to fix. It's important to know what causes the uPVC handle to break before you begin. Regular usage exposure to the elements, and general wear and tear may cause the mechanism of the handle to deteriorate, eventually leading to breakage. Damage can also result from hitting the handle with a hammer or pushing it open or shut. Minor damage, like chips or cracks, can be repaired. However, more severe damage such as rust or severe damage will require replacement of the entire handle.

Before beginning to fix the broken window handle, it is necessary to open the window to access the screws that secure the handle to the frame. These screws are typically hidden beneath small plastic screw caps that can be removed with the flat-head screwdriver. After the screws are removed, the handle will be easily removed from the window.

When buying a brand new uPVC window handle, it is essential to make sure that the length of its spindle matches the length of the previous handle. wooden window handles is essential to ensuring the new handle will be fixed in place and function correctly. To measure the spindle length, simply remove one of the screws from the old handle and use it as a guide. Once you have the correct size, position the new handle in an open position and insert the new spindle into the hole cut out for it.