15 Top Twitter Accounts To Discover Repairs To Upvc Windows Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need to find some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window to get to the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. Often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Billericay window repairs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens in an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window hinge is an easy procedure, but it is easier to do with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.


The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to provide assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges can also be unbalanced due to wear, causing gaps where the sash meets frame. If they are beyond repair, it might be necessary to have them realigned. In addition, the interlock could be unbalanced. This happens on the hinge's side, and could require to be cleaned. In certain instances it might be necessary to replace them.

These seals can wear down or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the windowsill on top. They will help stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach an point at which it is more efficient to replace them than repair them. If you encounter any issues with your upvc window you should consult a professional immediately.