10 Healthy Habits For Kia Picanto Key Fob Replacement How to Replace a Kia Sportage Replacement Key

The key of many Kia models has an electronic keyless entry system built into. The key is usually akin to the remote control and can be exchanged with a new one from an Kia dealer or locksmith.

Key fobs are prone to malfunction due to various reasons, such as the battery of the coin is dead, worn buttons signals, water damage, signal interference, and a defective receiver module. Here are some tips to help you get your Kia key fob that is a replacement for the sportage for good.

How do you replace a remote key or a smartkey?

Whether your Kia is equipped with an intelligent key, remote key, push to start key, or regular metal non-transponder key the battery in these keys will eventually need replacing. This is particularly true if the car displays a message that the smart key or remote has low battery power.

It's quite simple to do. To replace the battery in the keyfob remove the mechanical key from the slit that is located at the back of the fob. Then, push the cover open. A small screw is found inside the key fob, which holds the battery in place. Take out the old battery by removing the screw with the help of a small screwdriver. Insert the new battery and then close the gap on the key fob.

When the key fob is equipped with a fresh battery, test it by pressing the locks and unlock buttons. It's good in case the doors lock and unlock as you expect. You can now use your Kia's hands-free lock/unlock feature when your fingers are cold or you have to run some errands in Brandon.

Note: Some key fobs may need to be programmed (transponder chips or smart keys). This requires a programing machine which is available to the locksmith for cars or dealer. Other keys (non-transponder metal keys) do not require programming. If your keys need to be reprogrammed, then you must be aware of the key code written on the tag that identifies the key and record the number in a secure place.

How do you replace a battery?

If your Kia key fob isn't responding to pressing the lock or unlock button on the fob, it is a signal that the battery should be replaced. A low battery can also cause other issues, like the check engine light turning on or the engine not cranking correctly. It is quite simple to replace key fob batteries using just some tools.

Before starting the process be sure that your vehicle is off and all doors are shut. Locate the small plastic piece at the bottom of your key fob and gently jiggle it until the metal key pops out. Then, you can insert this key into the door handle of the driver to open your car.

To replace the key fob battery, take off the cover from the back and use a plier bar tool to release the latch holding the black negative battery cable. Remove the old battery and then orient the replacement battery to ensure that its "+" side is facing you and the "-" negative side is facing the fob's electrical contacts. Avoid using too much force when pushing the new CR2032 into position to avoid damage or bending the metal contacts.

Once the new battery has been installed and the key fob is turned on, turn it off and on in the ignition until the door locks. You can then test your Kia key fob to check if it is working properly again.

How do you replace a keyless key

Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The difference between these is that the smart key comes with tiny mechanical key blade tucked inside it, while the standard fob isn't equipped with. Both types of key fobs are equipped with batteries that will eventually need to be replaced. Luckily, this is an easy task that takes just two minutes.


Be sure to turn off your Kia, and be on a flat well-lit and well-lit area before you begin. Also, remember that there are tiny parts inside the fob which could be removed if not vigilant.

The first step is to locate the small release button that is located on the lower backside of your fob. This will be either a circular button or a rectangular slot. When you press it button, the mechanical blade will pop out and you will be able to open the key fob.

After the key fob has been opened, take out the battery that was in it. The new battery should be a CR-2032, and can be purchased online or at your local auto parts store. After installation it should be possible to lock and unlock your car with your key fob - even if the engine isn't running!

How do you replace the mechanical key?

The Kia keyfob can be a fantastic convenience that lets us lock or unlock our car with just pressing a button. But like any device there are issues with it occasionally. There are solutions to fix these problems and keep your key fobs working for an extended period of time.

A low or dead battery is among the most frequent problems. The battery could cause the device to stop working or work intermittently. If this happens you should replace the battery with a fresh new one.

If this isn't enough to resolve the issue then try using a normal flathead screwdriver to wedge open the casing of the fob's plastic. Be careful not to scratch any internal components or scratch the plastic. Once open, carefully remove the battery that was removed and replace it with a brand new one.

Close and open the door with the mechanical key. (Every kia fob comes with an emergency mechanical key that fits into the slot). Test kia picanto key fob replacement to make sure it's functioning properly. If the key fob not working, contact an authorized locksmith or dealer to help resolve the problem. Make sure they make you an emergency key that works for all door and trunk cylinders to avoid lockouts again.