A Step-By-Step Guide To Kia Picanto Key Fob Replacement From Beginning To End How to Replace a Kia Sportage Replacement Key

For many Kia models keys, the key has the keyless entry system that is built into the key. The key is usually akin to a remote control and is able to be replaced with a new one from a Kia dealer or a locksmith.

Key fobs are prone to malfunction for several reasons, including the battery of the coin is dead, worn buttons, signal interference, water damage and a faulty receiver module. Here are some suggestions to help you get your Kia key fob that is a replacement for the sportage once more.

How do you replace the remote key or smartkey

The battery inside your Kia's smart key will eventually have to be replaced, whether it is a remote key as well as a push-to start key or a regular metal key that is not equipped with a transponder. This is especially true if the car displays a message telling that the remote or smart key is not powered by the battery.

This is a relatively simple process. In order to replace the key fob battery, remove the mechanical key from the slit at the back of the key fob. Next, break the cover. A small screw will be in the key fob, which holds the battery in place. Using a small screwdriver, loosen the screw and pull out the battery that was in place. Insert kia picanto car key replacement g28carkeys.co.uk and close the opening on the key fob.

Test the key fob by pressing the lock or unlock buttons. You're in good shape if the doors lock and unlock as expected. You can now use the hands-free feature to lock and unlock your Kia when your fingers get cold or you have to do some errands in Brandon.

Note: Some key fobs (transponder chip or smart keys) may need to have their programming done. This requires a specific programming machine that only the dealer or locksmith can access. Other keys (non-transponder metal keys) do not require programming. If you need to reprogramme your key, you'll need note the key code's number on the key code tag.

How do I replace a battery

If your Kia key fob is not responding to pressing the lock or unlock button on the fob, this is a signal that the battery should be replaced. A weak battery can cause other issues, such as the check engine light coming on or a delay in cranking the engine. Fortunately replacing the key fob battery is a fairly simple DIY project that requires just the most basic tools.

Make sure that you shut off your vehicle and close all doors before you begin. Find the small metal or a plastic piece on the bottom of the key fob. Move it until the metal key pops out. The key can be put into the driver door handle to unlock your car.

To replace the key fob battery, take off the cover from the back and use a plastic pry bar tool to remove the latch holding the black negative battery cable. Remove the old battery and then orient the new one so that the "+" positive side is facing your face and the "-" negative side is facing towards the fob's electrical contacts made of metal. Avoid using excessive force when pushing the new CR2032 into position to avoid damage or bending the metal contacts.

After installing the new battery and turning the key fob on and off in the ignition until the door locks cycle. Then, you can test your Kia key fob to see whether it's functioning properly again.

How do you replace the smart key

Depending on the model of the Kia Sportage, you may have the standard key fob, or a smart key. The smart key comes with an embedded mechanical key blade while the standard keyfob does not. Both key fobs come with an internal battery that will eventually require replacing. This is a simple procedure that takes just two minutes.

Be sure to switch off your Kia, and be on a level, well-lit surface before you begin. Keep in mind that the fob is made up of tiny parts that could be thrown off when you're not careful.

The first step is to locate the small release button on the lower backside of your fob. It's either a circular button or a rectangular slot. After pressing this button the mechanical key blade will be released and you will be able to open the key fob.

Once the key fob is open, remove the battery that was in it. The new battery is a the CR-2032, and it can be purchased through the internet or at a local auto parts store. Once you're done, your key fob should allow you to lock the vehicle, unlock it, and then start your vehicle, even if it isn't running.

How do I replace the mechanical key?

The Kia keyfob is a wonderful convenience that allows us to lock or unlock our car by simply pressing a button. However, like all devices, it can have problems occasionally. There are methods to solve these issues and keep our key fobs in good working order over the long haul.

One of the most frequently encountered problems is a dead or dead battery. This can cause the device to stop working entirely or work intermittently. If this happens try replacing the battery with a new one.

If this doesn't fix the problem Try using a standard flathead screwdriver to open the casing of the fob's plastic. Be cautious not to damage any internal components or scratch the plastic. Once the battery is removed and replaced, you can replace it with a brand new one.


After the new battery has been put in, shut and open the doors with the mechanical key (every Kia fob has an emergency mechanical key that will fit in the slot). Test the key fob and verify that it's working properly. If the key fob isn't functioning, contact an expert locksmith or dealer to help resolve the issue. To avoid lockouts in the future, make sure you get an emergency key that will be able to work with all door and trunk cylinders.