The Ultimate Glossary Of Terms About Upvc Door Handle Replacement Choosing the Right UPVC Door Handle Replacement

Replacing the handles on your doors made of upvc is an easy task but selecting the correct handle can be difficult. Modern double-glazed handles come with spring cassettes, however older handles don't.

If the handle made of upvc on your multipoint lock is sloppy and floppy, there may be an internal problem. This article will address a number of potential problems and their causes.

Sagging or drooping handles

uPVC handles are susceptible to wear and wear and. This is especially true in older properties. A broken spring cassette in the door lever is the most typical reason for a handle that is floppy. This is caused by excessive force and the spindle that holds the cassette may be displaced or rounded.

It is important to know that a uPVC handrail replacement can be accomplished within a matter of minutes. The first step is to take off the handle unit that was previously used. To remove it, loosen the fixing screws on the back of the handle lever. Once the handles are removed, you can remove the screws and replace the cassette.

Online you can choose from a wide selection of uPVC handles available in a variety of finishes. The finish you choose will determine the life span of your handle as well as how easy it will be to clean. Finishes like PVD, Stainless Steel or Resista are designed to resist corrosion and will last for up to 25 years.

Once you've selected the color or style, you can choose the kind of handle you want. The most well-known types are the lever and pad configurations. Lever pads are commonly used to block access by unauthorised persons. They have both a lever inside and a paddle out.

Then, you should measure and record the dimensions of the handle you have. You'll need the PZ dimension (the distance from the screw hole to the centre of the lever), the length of the handle, and the size of the keyhole. Once you have these measurements, you can compare them to the handle size matrix to determine the appropriate replacement.

Broken springs

Over time, handles made of uPVC may become wobbly or loose. The spring cassette could also break. These springs help ensure that the lever is in a horizontal position. Without them your doors will not lock properly.

Modern uPVC handles are designed with these cassettes built directly into the backplate. These springs are often installed into older uPVC doors mechanisms. This can't be fixed by yourself but it's worth contacting your locksmith to look as this could be the reason for the drooping or sagging uPVC door handles.

One of the most common problems associated with uPVC door handles is that they become unstable or wobbly after a certain period of time. This is typically due to worn springs which can be an easy fix. Most often it is due to excessive use of the handle and because of that the square spindle in the handle will wear out and the springs will move out of place.

To correct this, you'll need to open the door and unscrew the fixing screws on the back of the handle plate. This can be accomplished using a Philips screwdriver. Once the screws have been removed, the handle can then be taken off. The plates for the handle are then able to be gently pulled apart. Then you can take off the old springs and replace them with new springs.

Depending on the type of handle you have the distance between the two fixing screws can vary and this is essential to know before purchasing the replacement. This measurement is known as the PZ and it is essential to use a measuring tape that is calibrated to ensure an exact reading.


After reinstalling the springs, you should be able to operate the handle without issue. It is recommended to lubricate your internal mechanism to make sure that everything is functioning exactly as it should. This will ensure that your uPVC door is as safe as it could be, and improve their comfort in the long run.

Handles that slide around

Handles that slide can be caused by a variety of things. One of the most common causes is that the levers of the handle aren't aligned with the lock. This can happen with both uPVC and composite doors, but is typically more evident on older doors since they are usually made of cheap materials that aren't able to stand up well to the elements.

This problem can be solved by a professional who will adjust the handles and ensure they're in line with the door lock. They'll also examine the lock itself to see whether there's anything that needs fixing. In many cases, a simple tweak to the handle springs is enough to solve this problem.

Changing your uPVC door handle is simple enough, but it's important to measure the measurements of the handles you have in place to make sure you have the proper size replacement. You'll need to take measurements of the distance between the two fixing screws and the size of the lever and key-hole position. You can then use this uPVC handles size guide to find a replacement for your home.

Once you have the measurements then the next step is to take off the existing uPVC handles. upvc door handles is usually quite easy and requires just a screwdriver get to the screws on the interior of the door. Once the screws are removed, you can then remove the handle and then move onto installing the new one.

It's important to secure the door with an appropriate wedge prior to beginning. This will stop it from closing during your work. After the handle has been removed it is now possible to access the underlying parts of the door to correct the issues that are causing it to slide.

A handyman from Fantastic Services will be able assist if you don't want to do the job yourself or don't have the skills. They will use specialist locks to open the doors without damaging the door. Then, they'll replace the damaged handle and make sure that everything works just as it should.

Gearbox damaged

A damaged gearbox may cause the handle made of upvc to become stiff and lose its functionality. This could prevent the lock from being able be opened using keys. This is a risk and must be addressed as quickly as is possible. It is important to call an expert locksmith if you can't resolve the problem yourself. They have the tools and know-how to complete the task correctly.

The first step is to unhook the handle from its cover plate. This can be done using a screwdriver equipped with flat heads. After you have removed your handle, you can then take out the middle screw that holds the barrel in place. After removing the middle screw, you'll be able to loosen the two screws that are holding the barrel. You can then remove the barrel out of the door. You will need to open the door to accomplish this, so be sure you have someone on hand to help.

Once you have removed your cylinder from the handle, you can replace it with a brand new one. Make sure that the new cylinder is the same dimensions as the old one. Otherwise, you could end having a handle that isn't aligned properly. This could cause a range of issues, such as leaks and drips.

Many upvc doors have adjustable slots which can be used to adjust the handle's tension or release. These slots are usually found on the inside of doors, close to the point where the handle meets with the cylinder. The slots for adjustment can be tightened by using an allen wrench. Once you've made the necessary adjustments you can screw the handle in and put it back in place. Then, you'll be able to test the handle to be sure it's working correctly.

If the door handle made of upvc becomes loose or floppy when it is closed, this is usually an indication that the upvc gearbox has been damaged or the internal spring components are breaking down. This could cause your multipoint locks made of upvc to fail, leaving your door wide open to intrusion. If this happens, it will be required to replace the upvc gearbox. This will cost between PS145-PS280 with the labor included.