5 Must-Know Subaru Car Keys-Practices You Need To Know For 2023 How to Programming a Subaru Key Fob at Home

Depending on how new your Subaru is, you might require having the key fob programmed by an automotive locksmith. pop over to this website is typically done by connecting a programming machine to the computer in the car.

To program your Subaru unlock the door on the driver's side by pressing the door button, and then close it. You will hear a sound on the instrument panel and the dome lights will light up.

Step 1: Find the circuit board for your transmitter

There are several ways to program your keyfob. It is first necessary to identify the type of key fob that you have. This can be accomplished by looking at the design of the key fob or by listening for a siren in your car.

Once you have the data, you can begin the process of programming your keyfob at home. To do this, you will require a key made of steel and a flathead screwdriver. You can open the key fob by twisting it. The key is inserted into the case and let go of the battery by pressing the tabs holding it in place. Replace the battery and put the case back together.

Step 2: Remove the key fob case

It is a good idea to change the battery in key fobs when they're not working. However, there are some cases where the buttons in the key fob might be damaged. If you notice that the metal contacts of the button have come loose Try soldering them into place to allow them to function properly.

Before you begin the process, ensure the doors of your vehicle are closed and the ignition is off. You can do this by closing the driver's side door and pressing your door button ten times in quick sequence. Then, you should hear the instrument panel chime, and your dome light should flash. This means you're ready to move on.

Step 3: Put the Key Fob in the Ignition

Many online articles will show you how to program your new or replacement Subaru keyfob at home. However, many of them do not give very specific instructions. Programming an electronic key is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and the doors shut. Open the door button control and use it to unlock all doors. Open and close the driver’s door a second time. After that, insert and remove your key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp if the settings are altered.

Step 4: Turn the ignition On.

It is essential to realize that this method of programming a key fob is effective if you have a functioning key. If you don't you can find an auto-locksmith or dealer who will need to program a key for your Subaru Fort Bliss.


After the key is programmed, it should be capable of starting your vehicle in about 5 minutes. To begin, make sure all doors are closed and the engine is off. Sit in the driver's chair and unlock all the doors using the door button. Put the key into the ignition and turn it back to the first position. The electrical systems will be activated, however, the engine will remain off. Repeat this process ten times.

Step 5 Step 5: Unlock the Door of the Driver's Door

Subaru offers a variety of high-end vehicles with key fobs that lock and unlock doors, start the engine, and defrost windows. These devices can stop functioning.

Call a locksmith dealer to solve the issue. This will solve the issue and ensure that your vehicle is safe.

To accomplish this, you need to open the driver's doors and close it. Put the key in the ignition, and then turn it back to position 1. Then, return it to the off position. Do this ten times in the row as fast as possible. After ten times you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock buttons on the driver's Door

The process of replacing the battery on a Subaru remote key fob is a breeze. First, you must open the exterior fob casing. Use a flathead for prying the casing open inside and then remove the old batteries.

After taking out the old battery, insert the new one and close the case. Sit in the driver's seat and then unlock all doors by using the door button control. Finally, place the key in the ignition and turn it to ensure that the electrical systems are powered on but the engine is off. Repeat this 10 times in succession until you hear a chime from the instrument panel. This will put the system into programming mode.

Step 7 7. Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoying sound heard when locking or unlocking the Subaru key fob from outside the vehicle could become distracting. In certain situations the chirp could be removed by closing and opening all doors and a double click of the lock button on the key fob.

Switch the ignition off and shut all the doors as well as the fuel-filler lid. Press and hold the lock side of the key fob's lock button for 10 seconds. When this is done the instrument panel emits an audible chime. The chime signals that the fuel-filler lid and door lid are locked. It is possible to change the setting to make the doors lock automatically and without having to push a switch.

Step 8 Step 8: Enter your 8-digit Transmitter Number.

Write down the first sequence of 8-digits and keep it in a safe place. Once you're in the driver's seat, shut the doors and turn the key to the first position. After 10 turns, your instrument panel should begin to sound once.

The circuit board that controls the transmitter is within the key fob case. There will be one or two sets of numbers (8-digits) on the circuit board. Note the sequence that starts with the first number, and follow the steps in this guide to register the code on your vehicle's system. This may require visiting the dealer for older models.

This user has nothing created or favorited (yet).