Why Is It So Useful? In COVID-19?
Changing the Battery in Your Mini Key Fob
The key fob is a handy way to lock or unlock your vehicle from an extended distance. It also allows you to activate the panic button on your car which can deter thieves.
If your fob isn't working It can be fixed with a few easy steps. First, make sure the battery is new. Remove the battery from the ignition, and then press the lock button rapidly three times.
Battery
The battery you use in your key fob is one the easiest solutions. The device uses a small coin-shaped 3V battery (CR2032 or CR2025) that is accessible in general stores, home improvement shops, and even some auto parts stores. Make sure you get a new battery -Old batteries are generally not useful anymore and could cause damage to the circuit board.
You'll want to start by prying the fob open. It might be a bit tight but with the aid of a flat screwdriver you should be able separate the two halves. Fit the screwdriver in the seams on both sides of the fob, and lift the clips which hold it in place. They are very easily broken therefore, be careful and slow.
After replacing the battery take the fob apart and examine it to determine if everything is functioning just as it should. If it doesn't work after pressing the button a few times, check that the contacts are clean. You can also test the fob with a spare to see if the problem is isolated to your key. If not it could be another reason for why your key fob isn't working. For instance, it could be that the button is worn out. This could cause the button to work at times, not always.
Interference
The key fob uses a tiny transmitter to send a radio signal of a short range to a device in your car. Its primary function is to allow your car to recognize the fob and open its doors when you are near it, as well as start when you push the ignition button within.
Interference can interfere with communication. If you charge your second-generation Apple Pencil while holding the fob (via iGeneration) it may prevent you from unlocking the vehicle.
Other electronic devices that operate at the same frequency can also interfere with the fob's signal. Garage door openers or tire-pressure monitoring devices can also be affected. Even a transmitter in your home could be interfering however it is difficult for an expert to test.
It's also possible that your key fob simply needs to be reset. This will require the transmitter in your fob to be recognized by the receiver in your Mini and a specific code is used for each pairing. Fobs usually need to be reset when they are removed or replaced, if you buy a new one or, in certain cases when the battery is changed. To reprogram a fob follow the instructions in the user's manual of your device or ask a dealer for assistance.
Chips with a problem
Modern electronic key fobs provide convenience and performance over traditional manual keys, however they are also susceptible to being damaged. One of the most common issues is a defective chip that prevents your key fob from working properly. Fortunately, it's usually an simple fix.
If your car key fob doesn't seem to start up, it could be the result of a defective chip. The issue can be fixed by replacing the battery which is cheap and easy to locate at any hardware store or big box retailer. Make sure to purchase a replacement battery that is compatible with your model of car to avoid further problems.
It is also essential to make sure that the fob isn't exposed to water or soapy residue. Water is a common cause of corrosion, which could cause issues with the circuit board. If this is the case, you will have to wash it with isopropyl alcohol or electronic cleaner prior to putting in a new battery.
It is a good practice to test the operation of the fob before driving the vehicle. Examine the voltage of new battery with the help of a voltmeter to confirm that it is safe. If not then you may need to replace the whole remote chip. A trained dealer technician can help determine the best solution for you vehicle.
Reprogramming
We provide a replacement slim key fob to replace your old key fob. It works the same as the original one, and full fitting instructions come with every purchase. We also provide our customers with a helpline.
Often, your mini-key fob will begin to malfunction or stop working completely. This can happen due to various reasons and can be extremely annoying as the car will not start and you have to wait to be able to drive again. However, reprogramming your key fob could be the solution and it's easy to do.
First, check to see if the battery in your key fob is functional and hasn't had to be replaced. Once a new battery is installed, it can't be reprogrammed and would require a replacement.
![](https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/343416868_1039553773685044_7497142052902958620_nlow.jpg)
Once
The Key Lab is programmed it will then be able to communicate with the car and control all of its functions, including the air conditioning, radio and even the sunroof and windows. It can also activate comfort access, which implies that the doors to the driver's side will automatically open and close as you enter the car or that the seats will move to help you get in and out. The key fob will activate the climate control settings and mirrors according to your preference, and can even alter the radio's settings.