10 Apps That Can Help You Control Your Change Door Lock Reasons to Change Door Lock

You can change the lock on your door for a variety of reasons, from increasing the security of your house to redecorating your entryway. You may also need to change locks if your key is stuck inside or is difficult to turn.

Even DIY beginners can easily modify their lock. Gather the materials needed to begin.

Remove the old lock

The removal of the old lock from the door is a crucial step before installing the new lock. This step is especially important when you suspect that someone else has access to your home. It may also be an ideal option if you have moved into a new house and experienced a burglary or had a roommate move in. The process is much easier than you imagine and can be completed in only a few minutes.

Begin by removing the screws that hold the deadbolt faceplate onto the door frame. To remove the faceplate, you will have to remove screws from both sides. This will let you see the hidden screws and give you a better understanding of how to proceed with the remaining steps.


After removing the faceplate you'll need to remove the bolt as well as the strike plate and strike plate. Use a screwdriver to loosen the bolt, and then take it out of the hole in the door. If the bolt is rusty, you might need to use a chisel smash it out. When using a chisel remove the bolt, be careful not to scratch the door frame.

Make sure that the new doorknob, deadbolt and lock fit in the holes that are already present in the door before you take out the old one. The majority of hardware stores and big box stores sell different kinds of locks and will assist you in choosing the best one for your requirements. Get help if the lock you purchased does not fit your door.

While you're taking off the lock that was previously in use, look for small slits or depressions in the handle or around the trim. If you are able to locate them, you can use straightened safety pins or a flat screwdriver to release the handle.

After the screw in the handle has been removed, you can begin to remove the knob from its spindle. To do this, locate the set screw at the base of the knob and loosen it. Then, take the spindle off.

Install the new lock

It's a good idea to change the locks on your doors frequently, especially if you have been the victim of a break-in. Changing the lock is an affordable, simple and effective way to ensure that your home is secure. With a screwdriver, and a few simple instructions most people can do it by themselves. Based on the situation you might also need to learn how to change the key of a door lock so that only you have the key.

To begin the process, you'll must purchase an additional lock that matches the keyway of your current lock. You will save money if you modify the lock yourself. The majority of locksmiths charge a fee to do this. You can purchase a new lock at a hardware store or even online. Standard deadbolts are suitable for the majority of doors. However, you'll need to measure your door to ensure that it will fit.

Most of the time the lock you purchase will include an image of a cardboard model that shows you how it will fit on the door. The template can be used to drill the hole. It's much simpler than measuring every time. If the template doesn't match your hole, take it back to the store and request a replacement.

When installing the new lock, be sure to place it on the right side of the door. Verify the latch. It should be marked with "up" or something similar. Make sure the latch is properly seated in the plate, and then attach it using the supplied screws.

If you are replacing the knob lock on your door it is also essential to be aware of the way it's operated. Most knob locks are left-handed however there are a few that are right-handed. If you're not careful, the lock could be placed on the wrong side of your door, which would make it impossible to lock from the outside or inside.

It is recommended to test the new lock after you have completed. You should be capable of locking the door from both the inside and the outside, as well as unlock it using keys. If you're not happy with the outcome, you can get a locksmith to fix it.

Test the lock

A door lock that isn't able to be opened can be frustrating, it can also put your family's security at risk. It's easy to solve the majority of door lock problems by tackling the issue and lubrication. First, make sure that your key is correctly cut and that the lock assembly itself isn't loose or dirty. If this does not solve the problem, try lubricating your door lock actuator with graphite powdered with powder.

Make sure that the door lock switch, the wiring harnesses and actuator connector are all working properly. Consult the wiring diagram or manual to determine the color code and function of the wires for each door lock switch. Use a digital meter or test light to verify that the actuator is receiving power and ground whenever the switches are turned on. If you notice an electric voltage switch on each switch activation, that indicates the switches are good and it's likely the actuator that needs to be replaced.

If the switch appears to work but the actuator doesn't move when you turn it, there could be a problem in the cylinder. The actuator cylinder is equipped with pins that have a spring-loaded. They stop the cylinder from moving until the key is put in, which then pushes them up to match the height of the key at that location. This causes the cylinder eventually to rotate and open the lock body and allowing the handle latch.

If the door lock actuator is still not functioning, you can remove it with a small screwdriver. It is necessary to remove the locking bolt first and then separate the plastic cover which holds the electrical connector. After that, disconnect the door lock actuator and let it fall. Then you should be able to find and remove the two bolts that are which hold the actuator in position. After the actuator has been removed and the electrical connector disconnected, you can remove it. black electrical connector.

Replace upvc window locks repair

If you own keys for your deadbolt or door knob if it is not working properly you need to either rekey the lock or replace it completely. This isn't difficult and can save you money. However, before you do this it is a good idea to get a locksmith to examine the locks and check them for any problems. This will give peace of mind knowing that your home is safe and secure.

To begin, remove the faceplate that is on the outside of the deadbolt or doorknob. There may be screws holding it in place, if so use a screwdriver to loosen them and pull the faceplate off. Then, you can remove the inside faceplate using a screwdriver that has a flat head. After you have removed the faceplate, you can remove the bolt and screw from the lock cylinder.

A locksmith can determine if you need to replace or rekey your lock. They can also provide advice about the best security options for your home. They will also make any necessary modifications to the door and frame to ensure that it is a perfect fit. They also provide the guarantee on their work.

If you choose to rekey the lock you must first purchase the new key. It is crucial to use the correct key inside the lock. A key that is not properly fitted could cause damage to the mechanism's internal mechanisms and prevent it from functioning. Insert the key into the lock to verify its size. If it is perfectly with the plug, it's of the correct size. If the pins stick up from the top of plug, then they are too long.

There are many reasons you might want to replace your door lock, including:

If you're moving into a former owner's residence or have lost your keys, rekeying the lock could be a more economical alternative than replacing it. It is also less invasive than a complete replacement. Rekeying an existing lock may not be possible in certain circumstances. If the lock has been damaged or jammed repeatedly, for example it could be time to replace it.