10 Simple Ways To Figure Out Your Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.


Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the door and the window is large, you might need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues, including sagging. A sagging uPVC windows can cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. This is typically caused by screws that have been removed over time, but it could be caused by the handle mechanism wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If window repairs near me isn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is related to the seal, not the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical part hinges are prone to wear out over time. Changing a window hinge is essentially a simple procedure, but it is easier to do when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The problem can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us a picture via our website will often solve the issue. We are more than happy to give suggestions.

It is also crucial to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, which can cause gaps where the sash meets frame. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to have them realigned or replaced. The interlock may be unbalanced. This happens on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. It is crucial to realize that windows last for a certain period of time and there may come an point at which it is more economical to replace them than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional immediately.

This user has nothing created or favorited (yet).