5 Common Myths About Replacement Window Handle You Should Avoid Replacement Window Handle

uPVC handles have spindles that work with the locking mechanism inside the frame. As time passes, this mechanism can become loose, and eventually break.

Replacing a damaged or broken window handle is simple and straightforward. First open the window and take off any screws that have been exposed (these will often be hidden behind plastic caps). The spindle will then be revealed. You can cut it to the proper length.

What's the problem?


As time passes the window handle may begin to show signs of wear and tear, which could eventually lead to needing to be replaced. This can be due to a variety of factors, including excessive use and aging as well as exposure to harsh elements such as freezing temperatures. If you notice that your window handle has deteriorated or is no longer in working condition It's a good idea to consult with a uPVC expert and find the right replacement for your particular type of window.

In general, uPVC window types are designed to work with a variety of handle and lock variations. However, it's a good idea to check with the experts at Truth hardware to determine the best replacement window handle for your specific casement or awning window. This will help ensure that the handle is installed correctly and give you a long-lasting solution that's robust and secure.

If you find that the window handle has a blocker in the shape of an iron "tongue" that stops the handle from turning involuntarily, then it's important to understand that this is a safety feature that protects you and your family against accidental opening of the window at an unfavourable angle. To avoid accidentally activating this blocker, you must press both the unlocker and the seal of the window profile simultaneously.

Another reason that could cause the reason that your uPVC window handle to stop functioning properly is that the lubricant used has dried. This is a common issue with uPVC handles as they can be exposed to elements for extended periods of time, which may result in them drying out. If you notice that your uPVC window handles are not functioning properly, you can try to re-lubricate the mechanism by applying a small amount of oil around the sash spindle as well as worm gear (Photo 1).

Do I need a new lock?

Window handles are an essential component of any window, as they help them open and close. However, with time, they will be damaged or worn out and require replacement. This is a simple and easy job.

There are many different kinds of uPVC handles to pick from, each offering distinct features. upvc replacement door handles is the standard window handle which has a simple purpose that allows the user to open and shut windows. A lockable uPVC handle is available for homeowners who are more concerned with security. This can be locked using a key, which provides an additional layer of security and meeting the requirements of home insurance in a lot of cases.

In addition to this there is a variety of other designs that offer additional features. Some uPVC window handles have a button which can be pressed in order to serve as a security device for children. This is a fantastic option for families with young children because it will discourage them from attempting to escape by opening the window.

As well as this there are a number of options designed to increase the energy efficiency of a property. This is because the handle of a window can be used to shut windows which reduces the loss of heat and keeps the inside of the property warmer.

Whatever type of uPVC window handle is required, it is important that the correct replacement is discovered to ensure the highest degree of functionality and safety. To this end it is recommended that the spindle of the window handle is measured, as this will provide an ideal reference point for the replacement to be installed. This will prevent the replacement from becoming loose or misaligned and causing further damage and possibly security concerns.

What kind of lock and handle do I have?

The majority of uPVC window handles will break over time due to constant use, wear, and tear, as well as the impacts of weather or intruders. But, before you rush out and buy a new handle and lock, you should take a quick look to find out exactly what kind of lock and handle you have. This will help to make sure you get the right replacement and that it will fit perfectly and will prevent damage to your window and ensuring maximum security.

There are two primary types of uPVC window handles and locks handles: cockspur handles and espagnolette handles. Both operate a locking system within the window frame. However, they do it in different ways. In general, the handles of espagnolette have spindles that are inserted into the lock gearbox. The shoot bolt rods are then turned to open the window. They are more commonly used in tilt and turn uPVC windows.

Cockspur handles, on the other hand are equipped with an elongated lever that connects to an elongated striker plate that is located on the inside of the frame. They are typically found in older uPVC windows and provide extra security by locking at both the top and the bottom of the frame.

It's time to replace the handle and lock. First, make sure the window is opened. Then, you can remove the screw from the top of the base of the handle. This will reveal two other screws, which you could also remove. After removing all the old components, you'll be able to simply replace the handle and screw into the two remaining screws. If there are screw cover caps, make sure you put them back on as well.

Do I require a Cockspur?

The Cockspur handle is a handle with a spur or nose on one side that locks onto a wedge in your window frame. These handles are found on older uPVC windows, as well as on some aluminium windows.

These handles are easy to install. You simply screw them exactly the same way as you removed the previous handle. It's a good idea test the new handle before you put it in place, just in case the spindle isn't in the right position. Once you've checked it and you're satisfied, you can screw the handle into place and install the cap for screws on the end of the spindle.

If you own a Cockspur style handle then it's crucial to measure the backset of your window that is the distance between the screw's base plate and the the handle's nose. This measurement is also called the 'nose-height'. It is crucial when replacing handles.

There are a variety of replacement handles for your windows, these include Espag handles, which are typically installed on newer double-glazed windows. You can also select tilt and turn handles, spade handles or monkey tail window handles. These handles can be used with either uPVC windows or aluminium ones.

Monkey tail handles are one of the most striking and attractive kinds of window handles and can be fitted to a range of window styles, from uPVC casement windows up to timber sash windows. These handles are ideal for those who want to improve the security of their home without needing to replace their entire window system. This type of handle works in combination with a shootbolt and is very easy to operate when open or closed.

How do I change my window handle?

If you require a new window handle because of breakage or to improve the look of your home, it's a simple operation that you can complete yourself. But, it's essential that you do this properly to ensure safety and efficiency.

Open the window slightly while keeping the handle in an open position. Remove the screws from the sides and the bottom of the handle with a screwdriver. Then shift the handle back to the unlocked/open position and replace the screw. Make sure that the spindle of the new handle is inserted into the lock mechanism in the same way that the spindle on the old handle was (a small test can be made by dropping something into the middle hole and seeing how deep it is without hitting anything).

After the handle is installed then replace the screw caps, ensuring that you do not lose them. Verify that the window handle is functioning by moving it between locked and unlocked positions several times.

Window handles are essential components of any uPVC window and, over time, they can wear down or even break. If this happens, it's vital that you replace the broken window handle as soon as you can to reduce security risks and ensure that your windows operate correctly. Bridgewater Glass' expert team will be happy to help you in the event that you require a new window handle for your home. Our team has a wealth of experience working with uPVC and we're confident that we can provide the right solution for your needs.