The Biggest "Myths" Concerning Fix Window Handle Could Be True How to Fix Window Handle Problems

If the window handle spins when turned or you can't pull the sash in so that it locks, the cause could be that the gears have stripped. In that case, it's time to replace the crank mechanism.

With the proper tools, replacing an uPVC handle is easy. It all starts by identifying the handle's type and then determining the spindle size that runs through it.

Remove the Screw Caps

After many years of use, uPVC window handles can become loose. This is typically due to a decrease in strength in the screws that attach the handle to the frame. If not checked, the handle could lose its grip and fall off or break.

It's simple to repair your uPVC handle by following a few easy steps. The first thing to do is to remove the screws. You can use the small tool such as the screwdriver or butter-knife. After removing the screw caps and removing the screws, it's time to take out the screws at the top and bottom. It is best to use a screwdriver that is manual since a power tool may harm the handle or frame.

After the screws have been removed, it is time to take off the handle itself. The procedure for this differs slightly based on the kind of handle however it is fairly straightforward. It is essential that, once the handle has been removed, you can clearly observe the small cutout inside the window mechanism that houses the spindle of the handle. It's also at this stage to ensure that the length of the spindle that you will use for the new handle is compatible with that of the window mechanism.

It's worth noting that the majority of replacement windows come with a replacement handle. This makes it easy to replace a broken handle.


If you are not confident about carrying out this process or are concerned about damaging your double-glazed windows it is recommended to consult an expert. They'll be able to determine the cause of your broken handle and offer the most effective solution for your home. If required, they will even install the new handle. This will save you time and money, and ensure that your window handles are properly fixed to the frame. This will help prevent any further issues and maintain the performance of double-glazed windows.

Unscrew the Screws

A window handle could wear out or the hardware that is used to hold it in place could need to be replaced. It may become stiffer when trying to open or close the window, and this is a giveaway sign that it's time to get replacement. The good thing is that it's an easy task to tackle even if you're not a DIY enthusiast.

First, ensure that you open your window a small distance and maintain it in the open position. This will stop the handle from falling out of the frame which could cause injuries or harm. The next step is to remove the screws from your window handle, using a screwdriver with a flat head or butter knife. After removal, place them in a secure place.

Unscrew the screws from your window handle, and make sure to keep hold of it while you work. You do not want it to fall in a sudden manner and harm your furniture or windows Be sure to work in a secure area.

Once you have removed it, you will be able see the place where it was attached to the uPVC sill. You may find an opening in the window guide track that you can utilize to remove it. If not, use a pry bar to gently separate the crank arm from the window sill. Once you've removed your old handle, you can put in the new one.

Find the screw holes for the flange on the new handle to the screw holes on your windowsill. Then, line up the notch on the crank arm with the middle notch on the window's track and slide it into place. Then, screw the new handle into position using the old screws, making sure they're secure enough to ensure that your window stays closed and secure. Once you've finished you can replace the screws if necessary. Check your window to make sure the handle is working correctly. If it's not working then you might need to tighten the screw fixings or replace your window handle completely.

Take the handle off

The handle is a small but crucial part of the window both for its functionality and aesthetics. Our uPVC handles come in a variety of styles that complement windows and add a unique touch to the decor of your home. From the PIXEL's modern square shape to our TBT handle each design is carefully developed with you in mind.

It's important to identify the problem when you're experiencing issues with the handle on your window. This will allow you to decide if it's time to replace the handle on your window or not, and also what type of handle is best for your window.

There are a variety of things that can cause problems with a window handle and the first thing to examine is whether the handle fixings are loose. If this is the case, use a screwdriver to tighten the screws.

Examine if the spindle of the handle is damaged. If it is, then you'll have to replace the handle. This can be accomplished by taking the handle apart and removing the screw or pin that holds the spindle in the correct position.

The final thing to check is if the locking mechanism is working correctly. If not then you'll need to replace the lock cylinder.

After replacing the handle, it's important to test it to ensure it is functioning correctly and that the lock is properly engaged. This will also allow you to spot any other problems, such as a stuck window or a worn-out gear.

After completing the steps outlined in this article, you should have an entirely new window handle that is both beautiful and functional! Knowing how to replace the handle on a window and having the right tools will save you money and time when renovating or repairing a home. If your window handle is damaged or you're just looking to upgrade your style read this guide and begin enjoying your Everest uPVC windows.

Replace the handle

Window handles are not just a practical element of the operation mechanism They also visually tie your windows together through coordinated designs and colours. If the handle is not in harmony, it will not only affect the aesthetics of your home, but it could also make your window difficult to open and close. If the handle on your window is broken, it's essential to fix it quickly. If, however, the handle is damaged badly, it's likely to need replacing entirely.

Depending on the type of window, the mechanism of the handle will differ. For example lever handles make use of a lifting motion to open the sash while cockspur handles operate by twisting the handle to an upright position. The style of handle you choose will also be determined by your personal taste and the style of the window. If you are looking for a contemporary sleek design or a traditional timeless style, there is bound to be a handle that will suit your preferences and blend seamlessly with your uPVC window.

A damaged window handle can be a frustrating issue. Fortunately, fixing it is simple and straightforward. It is important to understand what causes the uPVC handle to break before you start. Regular usage, exposure to the elements and general wear and tear may cause the mechanism of the handle to deteriorate eventually leading to breakage. Damage can also result from hitting the handle with a hammer or pushing it to open or close. Minor damage, like chips or cracks, can be repaired. However, more severe damage like rust and severe damage will require the replacement of the entire handle.

It is crucial to open the window prior to when you begin the process of fixing a damaged handle. This will allow you to access the screws that attach the handle to its frame. double glazed window handles replacement RepairMyWindowsAndDoors hidden beneath small plastic screw caps which can be removed with the flathead driver. Once the screw caps are removed, the handle should be able to easily slide away from the window.

When purchasing a new uPVC window handle, it is essential to make sure that the length of the spindle is the same as the length of the previous handle. It is important to make sure that the new handle is installed and operated correctly. To determine the length of the spindle take one of the screws from the old handle and use it as a reference. Once you've found the correct size, place the new handle on top and insert the spindle in the hole.