10 Meetups On Replacement Door Handles You Should Attend How to Replace Door Handles

The door handles in your home are an essential element of your decor. A new handle will bring your home's decor up to date.

Over time your knobs for your doors can begin to feel stiff and even break. These are indications that it's time to replace them. This guide will help you select the appropriate replacement door handle for your home.

Door Knobs

Door handles enhance the appearance of your house while making it easier for people to open and close doors. They come in a variety of finishes, colors and styles to complement your decor. If yours have started to show signs or need an upgrade, you can replace them in a couple of easy steps.

The first thing you need to find is the shaft or spindle through the knob's attachment to the door. upvc door handle www.repairmywindowsanddoors.co.uk have a tiny hole that you can insert the screwdriver with a small diameter to release the set screws holding the knob in place. Some have a tiny slot or hole that allows you to press the spring-activated detent pin using a flathead. When you press this pin it opens the latch mechanism and allows you to pull or push the knob.

Once you have the spindle, or shaft in your hands Remove the knob and replace it. Be sure to align it properly and check to ensure that the latch is working properly before tightening the new set screws.

Once you've replaced the knob, hold the rod of the latch over the hole in the door and lock it in place with the rod mechanism on the second knob. Make sure that the holes are aligned, then thread in the latch plate screws and tighten the screws.

Some people choose an brushed or smooth metal finish for their door hardware, giving their home a sleek and contemporary appearance. This can be matched with their other furniture. Some people prefer a rustic style that works well with farmhouse-style rooms. If you have someone in your family with mobility issues, you might prefer an rim or lever lock, which requires less pressure to operate.

Other factors are being looked at more and more when it comes to the design of door handles. Infection control and accessibility are key considerations in the creation of new designs for handles. For example, some can be operated with an arm.

Latch

The latch that holds the handle of your door open will wear down over time. Switching out the old latch to make room for the new handle is a simple DIY job and will make a huge difference in how your door opens and closes.

Depending on what type of handle you are using the latch may be a separate component or an integral part of the knob. In either case, you will follow the same procedure to remove and replace. Getting the old latch out of its place is quite simple, especially if your door handle is equipped with what's called a "magic button". The tiny pressure-slot, which is located on the side knob is what you will need to press in order to remove the latch of the handle.

If your handle doesn't have this magical button, the first step is to remove any cover plates that are positioned over the latch plate. These are usually rectangular or circular and can be removed by using a screwdriver to pry them off the handle. Some have slots where you can insert your screwdriver. Other handles simply snap off.

The next step is to unscrew the two machine screws that secure the latch and inner plate to the door handle. You will need to store these shorter screws with an angled tip in a safe place to be able to reuse them in the future. After these screws are removed you can remove the latch plate and mechanism out of the door's hole and set it aside.

You can now begin working on the new latch. Place the latch plate in the door hole and secure it with the hardware supplied. Make sure that the square pin on the interior of the latch faces the latching mechanism of the handle and aligns with the screw holes on the other sides of the handle. Then, push the exterior latch plate onto and secure it using the screws provided.


Strike Plate

One of the most common reasons for replacing the door handle is that it is loose or isn't locking properly. This is usually due to incorrectly aligned parts in the latching mechanism, like an unbalanced strike plate that is too short or moved upwards or downwards on the doorjamb over time. This simple project will allow you to replace your old strike plate with a new, larger one that can provide greater security and ensure that your door stays shut.

Apply some lipstick or other marking material on the bolt for the latch to check if it is the strike plate. Close the door and try to latch it. If the mark is below the strike plate's hole, it means that the plate is too small and the door will not latch. If the mark is higher than the strike hole on the plate, it's likely that the strike plate has been moved up or down the doorjamb.

You may be able simply to put the new strikeplate in place over the old one using the screws included with it, based on the door you have. You may need to drill holes first, and then chisel some wood out to ensure a secure fit. If this is the case, be careful not to chisel too hard or you'll cause damage to the strength of your doorjamb.

Installing a new box-style strike plate will provide the lock with a stronger grip on the doors and will require more force to open them. Typically it requires two long screws to secure the strike plate to the frame of the door. You'll have remove the previous strike plate, then drill and chisel the wood to make room for the new one.

This hard-to-find strike plate is designed to be used with antique rim locks and it's made from sturdy solid brass in a heavy duty thickness. This kit includes wood screws as well as machine screws, allowing you to choose the right hardware for your needs. Make sure to note that wood screws have a sharp edge, whereas the machine screws are more blunt.