Five Composite Door Handle Replacement Lessons From The Pros How to Replace a Composite Door Handle

Door handles can make a huge difference in the look of your composite or UPVC doors. There are a variety of handle sets available, whether you want a heritage antique black or stainless steel suite.

Making the switch to your door handle is simpler than you think. Follow these steps and you'll have a new door handle in a matter of minutes.

1. Measure the Door

The first step when replacing the handle of a door made of composite is to determine the proper size of the new handle. This can be accomplished by taking measurements of the handle. The measurements you must make are the centre of the spindle hole (also called the PZ measurement) and the centers of the Euro cylinder holes.

Once you've got these measurements, you can begin looking for an appropriate handle. There are numerous handles to choose, so make sure you find the one that best suits your home and style. The choice of the perfect door handle is not just about looks, it's also about functionality and security.

When shopping for a new door handle, make sure that you measure the door and not the brick opening. This will give you the most accurate measurements of the handle and will ensure that it is sized correctly. It is also important to be aware of the backset of your door. This is the distance from the center of the handle bore hole to the edge of the door. Most uPVC doors have either 2-3/8" or 2-3/4" backsets, so be sure to choose a handle that has the correct backset for your door.

There are many methods to measure the door handle, but the most common is using a tape measure. Make sure you make use of a tape measure that has been calibrated to get the most precise results. When you measure, it's important to remember that sizes are measured in millimetres.

After determining the measurement, you'll need to decide whether you would like to replace the handle by itself or the whole set. The replacement of the handle set is usually a less complicated process, and it can save you money in the end.

After you've removed the old handle, it's time to install the new handle. The process is relatively straightforward, and the end result are guaranteed to be flawless. Be sure not to loose any screws, and be sure that all features line up properly. Once the new handle is in place, it's a good idea test its functionality by moving it up and down, and locking and unlocking it.

2. Remove the Old Handle

Door handles are one of the most important parts of a door, bringing style and functionality. Replace them if they're damaged, loose or dated. It's an simple and quick task that will make a massive improvement to the look of your home. However, before you can install a new handle, it's important to remove the old one and make sure that the holes left behind are large enough to allow the replacement to fit correctly.

You can easily remove the mounting screws from most types of door handles. Some designs, however, are more difficult to take off. Look for a small slot in the neck of handle generally near the connection between the base and the latch plate. Use composite door paint repair , or a small Allen wrench to depress the fastener, and you will be able to take off or unscrew the handle. Be cautious when doing this, as the handle and the latch plate might fall out of the door's hole. If this happens, take two pieces of half-circle cardboard (not box cardboard, but not construction paper neither) and then place them in the holes that you made when you took out the bolts. This will prevent the latch and handle plates from falling down to the bottom of your door.

If the handle isn't secured it could be secured by a pin or snaps into an opening in the bezel that is above the lock mechanism. In this scenario you'll have to take off the entire cover plate or rose, then the handle. Certain types of handles include a screw to hold the latch plate in place that you can unbolt as well.

After removing the old handle from the door jamb you'll find a number of holes in the slab that are the same size as your latch plate. To avoid having to repeat this step, select the handle that is in line with the size of the latch plate. You should also double-check that the strike plate, which is set into the door jamb and holds the latch when closed, fits with the handle you select.

3. Install the New Handle

The front door handle is an essential part since it allows you access to your home, and also provides security for your family. If the handle starts to lose its shine or becomes difficult to operate, it is time to replace it. It doesn't matter if it's for aesthetic reasons or due to it being damaged replacing the door handle is a simple job that everyone can handle themselves without the need to contact a professional.

Before you start the replacement, make sure the door is wedged open by using a door stop, or any other item you have at home to prevent the door from closing while you work on it. This will stop the door from shutting on you as you try to install your new handles and it will make the process much easier.

After you have secured the door open, you'll be required to remove the screws holding the existing knob in place. These screws are usually located found on the inside of doors, and can be covered with a cover plate. Once the screws have been removed, take off the door handle that was previously in use and make sure the holes aren't blocked. The spindle of the new door handle should be inserted into the hole to allow it to be seen on the opposite side.

Check that the screw holes on the handle match to the holes for screws on the door and is orientated in the correct direction. If it's a lever handle the open end should be facing the hinges of the door. If it's a knob, the closed end should be facing away from the hinges.

It is also necessary to decide on the appropriate replacement door handle made of composite. The most common type of handle is one that has two holes on either side, which is suitable for both left-handed and right-handed doors. You will need to measure the distance from the edge of the door to the center of the knob opening, known as the backset, and make sure that your new handle will match this measurement.

4. Secure the Door

There are a variety of reasons why you might want to change your door handle, whether it's because of damage or age, or simply because it doesn't look as good as it did in the past. It could also be a sign that it's time to upgrade your door handle to something more modern or sophisticated. It's a fast and simple procedure that can be completed in no time.

There are a variety of handles to choose from, so it's important to determine the appropriate one to meet your needs. A lever or lever-lock handle is a popular option because it provides a high level of security and is simple to use. It is often combined with a multi-point automatic lock or slam shut locking system to ensure extra security in the event of an attempted break in.


A long bar handle is an alternative option. This kind of handle provides an attractive style and is usually used together with mortice deadlocks and night latch to provide extra security. It is usually found on the outside of doors and adds a a bold and stylish aesthetic to your home.

Keyed handlesets are also a popular choice, as they provide a level of functionality that makes it easy to secure your home. They are comprised of an exterior handle, a latch operated with the thumb, and a dead bolt. They can be easily installed on most doors, as they use the existing installation holes.

Before leaving the house, it is crucial to test the new handle. Check that the handle moves smoothly and without any lag. Also, ensure that the bolt is properly locked. Close and open the door a few times to make sure that it is secure.

A simple chair can be used to barricade a door in a pinch. Find a chair that fits under the handle and wedge it in. It may not be as efficient as other methods, but it is a good temporary solution to ensure your home is safe.