15 Lock Repair Bloggers You Should Follow How to Fix Common Lock Repair Problems

With the right lubricant it is easy to fix stiff locks. Try penetrating oils or graphite spray and then insert your key, turning it couple of times to spread the lubricant.

Every now and then, tighten the hinges of doors and wipe down the deadbolt, latch and track. This will stop doors and handles from catching and sticking.

Sticky Locks

Locks are utilized every day and we consider them an expected thing until they get sticky or, if they're not careful enough break. The good news is that the majority of the time, your locks are simply in need of some lubrication in order to get back to functioning smoothly. This is one of the most common problems with locks for your home and an easy fix particularly if you know what to look out for.

The first step is to clean out the lock mechanism. Using compressed air or compressor tools, blow out any dust or debris that has made its way into the key hole. Inhaling graphite particles could cause illness or infection. After you have removed the debris, use powdered Graphite to take off the lock. Powdered graphite will not leave any marks or residue on your keys, unlike liquid graphite, which can get onto your lock. If you don't have a lubricant that is powdered, a pencil leads works as a good alternative. Insert the key into the lock, then turn it a few times in a row to spread the graphite and assist it in achieving its purpose. Check the lock after you're finished to make sure it's working as expected.


If the lubricant doesn't do the job, it could be that your lock has experienced some misalignment. This can occur over time as the door frame shifts because of changes in temperatures and weather. A licensed locksmith can examine and fix the alignment of the lock in order to restore smooth operation.

If none of these methods work, you can spray a lubricant for locks made of silicone directly onto the key, not the lock itself. Choose a lock-specific lubricant not WD-40 or sewing oils. These can cause your locks to stay stuck and hold dirt over time. Make sure to clean any excess lubricant, as it will draw dirt and make your lock more sticky.

Broken Keys

Many people attempt to force a damaged lock key out, but this can cause more harm than good. This is particularly true if the key splits inside the lock. When you try to remove the broken part, the mechanisms and pins inside the lock may become out of alignment. This could make it difficult to operate the lock, and also makes it more vulnerable to breakage. It is necessary to contact a locksmith if you cannot remove the broken key.

If a large part of your key remains hanging out of the lock you can usually make use of needle-nose pliers to grab the key and pull it out. If the broken part is stuck deeper within the lock, you can sometimes employ household items such as a paperclip or bobby pin to pull it out. Be sure that the object you select is small enough to fit into the lock, but not so thick that it touches the sides of keyway.

In the most extreme instances, you can attempt to use a small jigsaw blade or hack saw to take keys that are broken from your lock. Make sure the serrations on the blade are angled away from the lock, and not forward, so that some of the teeth could latch onto the damaged key. If you can feel the saw teeth latch onto the broken key, give it a slight twist and pull, and it should slip out of the lock.

Super glue can also be used to reassemble the key. This is extremely risky and could cause damage to the lock cylinder and should be reserved for extremely desperate situations. It can be a challenge to determine the right amount of super glue for this kind of application. It is possible to play around with it a bit before you achieve the perfect. When trying to remove a damaged key from a locked, be aware that too much pressure and the wrong technique could cause the key to break into smaller pieces, push further into the lock, or even cause damage to the lock's cylinder.

Damaged Cylinder

The head of the cylinder is responsible for sealing your engine and keeping internal combustion pressures. They also act as passages for coolant and help to conduct heat away. A damaged or warped head can affect the engine's performance as well as power. This can result in poor fuel economy, sluggish acceleration and difficulty in climbing steep slopes. You can tell if your cylinder head is suffering from damage if you observe signs like misfires, leaks, overheating and low compression.

The cylinder head is an vital component of your engine, and if it's damaged or warped, you must fix it promptly. This procedure is complex and requires specialized tools and expertise, so it's best to leave this to professionals. A skilled mechanic will be able to replace the seals and verify that the head of the cylinder is in good condition.

If you're looking for a Reading garage, choose one that has experience in hydraulic cylinder repairs. They'll be able to identify and fix any issues that you may encounter with your hydraulic cylinder, ranging from minor leaks to more serious issues, like a bent rod.

Hydraulic cylinders are utilized in a wide variety of industries such as manufacturing, construction and aeronautics. Even though they're built to withstand harsh conditions, even the toughest cylinders may suffer damage from time to time. If you wish to keep your cylinder in good shape it's essential to repair or replace it regularly.

The first step to repair your hydraulic cylinder is to get rid of the piston and the rod assembly. After you've removed these components, you can begin disassembling the cylinder tube. Start by loosening the set screw and end cap. The lock nut should be removed later. Now, you can take off the piston, the head/gland, and the lock nut. Before G28 Car Keys begin the repair, make sure you inspect these parts and other polished components for indications of damage.

After disassembling the cylinder head you can clean it using an oil-based cleaner. After cleaning, blow it dry with compressed air. Reassemble the assembly by putting in the rod assembly, piston and gland. Replace the piston seal when you are assembling the rod assembly. Also, you should install the new locknut.

Sagging Locks

Over time, the screws that secure your door could loosen and slide. This causes the latch to not fit into the strike plate hole in a proper way. This can make it difficult to open the door with the key, and a misaligned lock is also more vulnerable to burglary since criminals are more likely to have a hard time bypassing the bolt and latch of your door. To fix this issue, you'll need to use a screwdriver to tighten the screws. You may also need to sand down the mortise of the hinge if it's too deep, and then replace the hinges to make sure they are flush with your door frame.

A common problem with door locks is that they get stuck and cannot be turned. It's tempting to bend the bolt back into its original form, but this can damage your lock. If the bolt is damaged, it must be replaced by a locksmith.

The first thing to do when this happens is to examine your door for loose hinges or screws. Also, you should examine the lock using a different key, to make sure that there isn't a problem with the key.

If the issue isn't with the key, or if a sagging door has resulted in a locked that is not aligned it is possible to solve the issue by loosening the screws and then making adjustments to the mechanism so that it fits into the strike plate hole correctly. It is necessary to align both handles and have someone hold them temporarily while you do this. Replace any damaged or stripped screws.

Then, you'll need apply lubrication to the lock to make it move freely. You can use either a dry graphite or silicone-based lubricant. But it is recommended to apply only just a small amount of lubricant to your lock. A lot of lubricant can make it hard to turn the latch or bolt, and too little could cause corrosion.