This Is The Advanced Guide To Double Glazing Door Lock Repairs Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism broken? Perhaps the door or window handles aren't aligned correctly or are difficult to use.

It is essential that your double glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith will be able to fix your door lock at a reasonable cost.

Snapped Key

It can be a hassle when a key gets stuck into the lock. It also poses an issue for security, since the door may not lock and leave you vulnerable to intruders. There are a couple of quick fixes you can make to resolve the issue and make your door functional again.

The first step is to remain calm. If you panic and start doing a lot of fumbling around you could end up pushing the broken piece of the key deeper into the lock, making the situation much worse.

Then, spray WD-40 or another penetrating oil into the lock to make the broken piece slide out more easily. You can also use a screwdriver to break up any pieces that are stuck. If you have a part of the key that is still sticking out and is not being removed, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that can be used as a hook extractor, and some jigsaw blades are also suitable for this function. If you don't happen to have any of these you can bend a hook with needle-nosed pliers. Additionally, you can make use of a pair of tweezers to grasp and pull out the remaining pieces of broken keys.

If you are unable to get the broken piece of the key out, you can try using a lock de-icer. It is available at all hardware stores, and it is used to freeze any moisture or ice that may be inside the lock.

If none of these methods appear to be working, it might be the time to contact a locksmith. Fitlocks experts can quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. Request a repair for your double glazing through us online, or give us a phone call to discuss your needs.


Broken Cylinder

A damaged cylinder poses an extremely risky security issue. A professional locksmith can easily fix the cylinder. To fix the cylinder, locksmiths must tap it. They can do this using a hammer or other tool, but the best method is to employ a long match or piece of wire. The match or wire's end close to the keyway. The locksmith will then strike the lock to crack it. This is more secure than using a hammer that could cause damage to the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can happen when the cylinder block and cylinder head are made from different metals, including cast iron and aluminium. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.

Corrosion is another possible cause of fractures in cylinders. If the cylinder head and the block of the cylinder are not maintained properly, this could cause corrosion or rust that could cause them to expand at more than they should. This can cause cracks in the future.

If your uPVC window or door lock is rigid and requires a lot more pressure to turn it could be due to a variety of causes. A defective locking mechanism, misalignment, or a worn handle are common causes of this problem.

Fortunately it's a simple and inexpensive fix for most homeowners with double glazing. A professional locksmith will usually solve the issue within one hour of arriving at your home. Depending on the needs of your home they will be able to replace the locking mechanism, change the window handles, or change the gearboxes. A skilled locksmith will always be able to inform you on the most cost-effective solutions for your home. They can also suggest upgrades to high-security 3 Star euro cylinders TS007 that give you an additional layer of protection against burglars. It's a small price to pay for the peace of mind that comes with knowing your uPVC doors are safe.

Broken Handle

It's not surprising that window handle locks can break. They have intricate mechanisms that wear out over time. If yours is damaged it's difficult to identify the cause of the issue. Make sure you fix it correctly.

Fixing your broken handle, regardless of whether it's the internal latch or locking mechanism can increase the security of your uPVC door and prevent draughts. It is costly to repair or replace the handle in a way that isn't done correctly. It could also harm the frame and lock of your door.

Screwdriver When the window is open, loosen the screw holding the handle. The screw should be on the inside of the backplate. It is typically covered by a screw cap to enhance the appearance. It is not recommended to lose any internal components of the handle like the levers and plates on either side. It is best to keep them in the same order so that you can replace them in the event of a need.

Then, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle with a second screwdriver. Once the screw is loose, take the handle off and remove the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can purchase them online or in hardware stores). Securely screw it in the correct position. Do not overtighten the screw because this could harm the handle as well as the window frame.

Ensure the new handle is correctly fitted Close the window and test the handle. The hope is that it will function smoothly and you'll be able unlock your window.

While you're working on the handle, don't forget to ensure that your uPVC windows are shut properly. If they don't, you could experience damp and draughts inside your home, as and also affecting your home's energy efficiency. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they can shut properly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as a locking device in the window frame. The handle is attached a central rod that triggers the mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely the spindle is broken. This can be a problem that is frustrating.

There are solutions to this problem. double glazing repair will be able to quickly and effectively fix this issue. They can take apart the window handle using a tool that can remove the wheel part of the mechanism where the spindle goes. This is done without causing any damage to the handle or causing other damage to the window frame.

Once the wheel has been removed, the technician will examine the spindle to determine what has caused it to break. This involves breaking the spindle into its constituent components and carefully observing their general condition, as well as any specific areas of damage or excessive wear. This process is usually carried out by technicians in a clean and safe environment.

The next step is to clean the damaged spindle, this will remove any dirt or debris that might be obstructing its normal operation. The spindle can then be repaired or replaced. If it is being replaced the technician will need the dowel that is similar in size to the one used in the first and drill mating holes into both parts of the spindle. This ensures that the new spindle is an exact fit with the handle.

If the spindle is damaged and cannot be repaired, it could require replacement. Home centers can sell generic replacements but if the window design is unusual you'll require contacting an expert in woodworking or cabinet making who can make the exact part. Once the spindle has been installed, it is attached to the handle. Line up the screw holes on the handle with the screws already in the frame. Once the handle is firmly in place, you can use your uPVC windows.