How To Beat Your Boss With Upvc Window Handle Replacement uPVC Window Handle Replacement

Window handles can wear down or break because of continuous use and exposure to weather. In these instances, replacing the handle is the most effective option.

Upvc handles are available in many sizes and styles. Older windows used cockspur handles with various step heights. Modern windows have espag handles with standard 43mm centres (2 fixings). Examine the spindle of your current handle to ensure that you are getting the right size.

Remove the old handle

uPVC handles are designed to last a long time, but they may break down due to excessive usage, age or exposure to elements. The good news is that replacing them is a simple and cost-effective option. Making use of the right tools and steps will ensure that your new handle is properly installed.

Before you begin, be sure that the handle you're purchasing is compatible with your UPVC window's design and features. Make sure that the screw holes and the spindle length match and that the handle functions smoothly when you turn it to engage the lock mechanism. Also, make sure to test the new handle by turning it to ensure that it can open and close the window with ease.

To replace the handle on a upvc framed window, you must open the window and gain access to the frame. Find screws that hold the handle to the frame, typically located above or below the handle and secured under plastic screw covers or caps. Take the covers off using a flathead driver to expose the screws beneath. Once you have removed the screw covers take off the screws that hold the handle to the frame and then the handle itself. When removing the handle, be careful not to risk falling or damaging the glass.

Pay attention to the position of the spindle (the metal bar that runs through the middle of the window handle) when you remove the handle that was previously in use. This will be important when you install your new handle.

The spindle length is usually printed on the base or the packaging of the UPVC handle. The spindle length measures how the handle's spinel extends out from its base and how far the spinel goes into the UPVC window. You might also want to measure another handle on the same window to determine how long your new UPVC handle should be. The ideal is for the handle to be the same length as the old one. The handle will not fit properly, and could even break.

Measure the Spindle

It is important to choose the correct replacements for your window handles, regardless of whether they're damaged or displaying signs of wear. This is because the incorrect handle can affect the performance of the window and increase the chance of breaking the glass. The most important aspect to consider when choosing the right double glazing window handles for your home is the length of the spindle. This is the spindle length that extends out from the base of the handle, or the distance the spine extends into the frame. You can determine the type of handle by taking the spindle measurement of another handle.

There are numerous kinds of upvc window handles available, and each comes with its own unique characteristics. Some handle can open the window, while others feature locks to keep it from being opened by children or intruders. Some also feature a cranked design that allows for more hand clearance or are fixed inline, instead of having to be fitted with a crank on the frame of the window.

When choosing a new upvc window handle, it is crucial to take into consideration the step height of your existing windows. This is because the step height determines what kind of handle you will need to fit it. The typical step height of a uPVC window is 21mm. However, timber and aluminum windows have a lower height of 9mm.

The spindle is a metallic bar that is inserted into the middle of the handle to the lock mechanism on the uPVC windows. It is important to check the size of this spindle prior to purchasing the handle for the first time, as a smaller diameter can result in the handle not fitting correctly. This can lead to the lock becoming damaged or inoperable, and the handle not being in a position to open the window.

When measuring the spindle it is a good idea to have something small to work with like a pencil or a piece of paper to ensure you get a precise reading. This can be compared to the measurement of a brand new window handle made of upvc to ensure that it fits in your window.

Installing the new Handle

Depending on the kind of handle you have, you'll need to replace it with a handle that is in keeping with the decor and ironmongery of your home. You'll also want to think about whether the style of handle you're replacing is suitable for your window and how it will be used.

If you're replacing the tilt and turn handle, make sure to purchase one that will unlock in both directions. It is important to get the left-hand or right-hand handle, as if incorrectly installed it can cause problems with opening windows and restrict airflow.

To take off the old handle start by looking for the fixing screws or pins that secure it. These are usually located on the inside of the window handle and can be removed with the help of pliers or a screwdriver. After the screws have been removed, the handle should fall off easily. If it doesn't, make use of a little force to pull it off the spindle, and then remove it completely from the window.

When you purchase replacement handles, ensure that they have the same height as the ones you have. This is the amount that the handle's nose extends from the back of the handle base and can be measured by an ruler or a tape measure. The spindle measurement is also vital. It can be accomplished with a ruler or a tape measure. It is the distance between the handle spindle and the frame of the windows.


Espag and cockspur handles have an average backset of 43mm (2 fixings). However, you'll need to know what the original size of your uPVC windows is to find the appropriate replacement handles for them.

In general, uPVC handles can be either in-line or cranked. In-line uPVC handles are straight and can be rotated left or right. Cranked handles are only functional in a certain direction. Take into replace window handles and your personal preferences when choosing the right uPVC handles. If you like the look of a brass or chrome double-glazed window handle, you can have the same style for your home by purchasing handles that have the same look as your current uPVC windows.

Test the Handle

There's a variety of handles available for your uPVC windows, so it's important to find the perfect one for your needs. The most effective handles will make your windows more secure and easier to operate. This will help you get the most value from your double glazing. It is crucial to select the handle that is in line with your window style and is compatible with your locking mechanisms.

Espag Handles

The most popular uPVC handle is the Espag handle. This handle comes with locks built in. This increases security and makes it difficult for burglars to break into your window. There are two types of Espag handles: inline and cranked. Inline Espagnolette handles are rectangular in shape and flat. They have a spindle that runs through the handle and is in contact with the locking mechanism of the window frame. Espagnolette handles with a curved or angle design function similarly to inline handles.

If the window handle is damaged, you will need to replace it. There are a variety of alternatives for replacement available on the market, therefore it's important to find the perfect handle for your window and appropriate for the lock mechanism that you use in your home. Choose a handle constructed of top quality materials to increase its durability and resistance against the elements.

It is important to inspect your windows regularly to ensure they're working correctly and you're not losing heat or energy. Do not hesitate to call an expert if your uPVC window needs to be repaired. They'll be able to guide you on the best option for your home, and will provide a quick, cost-effective solution.

Switching your uPVC window handle is a simple process that can be accomplished in just two steps. By identifying the handle type, measuring spindle and using the appropriate tools and supplies it is possible to ensure that your window will be safe and comfortable.