The Most Sour Advice We've Ever Heard About Patio Door Repairs Tilt and Slide Patio Door Repairs

A tilt and slide patio door that are well-designed and functional brings light and fresh air into the home, and allows for effortless movement from indoors to outdoors. Modern aluminium doors provide strength and durability along with thermal integrity, and various glass options that can be adapted to an array of styles.

Dirty tracks and rollers are the most common reason for sliding door issues. Cleaning and regular lubrication of these moving parts can ensure that your door functions well.

Track and Roller Replacement

Tracks and rollers are the principal components of sliding door functionality. They are housed within the bottom of the aluminum door panel. They are mounted on a track that helps them open and close. Over time, dirt could cause the tracks to get blocked and cause the rollers to be damaged. Keep your patio door clean and lubricated to avoid these issues.

If your track isn't severely bent, it is usually possible to repair the track and rollers, without taking the door off. You can ask a relative to assist you in lifting the panel off the track by tilting it towards you (Photo 3). It could take some effort to lift the panel as they can be heavy. After the panel has been removed, lay it flat on sawhorses and inspect the rollers. Replace them if damaged by a new roller set. You can also adjust the height of the rollers by turning the adjustment screws- typically located in slots on the edge of the door panel.

If the rollers are in good condition they may require cleaning or lubricated. Use a screwdriver for removal of the rollers, then wipe each one with denatured alcohol. This will get rid of any dirt and grime that has accumulated that might be creating resistance. After carefully putting each roller into its slot completely retract it using the adjustment screw. Lastly, lubricate the rollers by spraying them with silicone. This type of lubricant doesn't retain dirt like petroleum-based products, and will help your door move effortlessly.

After cleaning and reinstalling rollers, you can reinstall and test the door to make sure the track is aligned correctly with the rollers. Also, make sure that the doors slide smoothly. Contact a local dealer if you require assistance. Keep your doors clean and lubricated to extend their life and reduce the need for repair. We recommend a lubricant made of silicone because it doesn't draw dirt in the same way that WD-40 does. It is recommended to grease your tracks and rollers at least once a month.

Replace insect screens

Sliding patio door are great to maximize floor space, allow airflow, and provide stunning panoramic views. However, they can be problematic if their mechanism stops functioning or isn't working properly. Luckily, most problems with sliding screen doors can be easily fixed. Dirty rollers caused by debris in the track or a wrinkly screen are typical causes but you can solve them by following these easy steps.

If your screen is sliding or wrinkled, you can place a 1x4 under each corner of the frame to create a slight bend in the middle. This will help to make the screen more rigid and straighten it.

Be sure to buy an alternative screen that is just a few inches larger than the frame's opening in both directions. This will give you room to trim off any excess. Also you can use a spline roll tool to press the rubber spline's edge into the channel. Once you've completed this, it's time to roll in the rest of your spline.

Adjusting patio doors repairs near me

In contrast to traditional sliding doors that open by turning the handle tilt and slide patio door mechanisms permit you to keep the doors open to let in air while keeping your children or pets out of your living space. Despite the convenience of this system, they tend to take more force than they are expected to and, over time, this causes increased friction, crooked tracks or misalignments which could cause the door to fail. The early detection of problems and minor adjustments can usually solve these problems, reducing the cost of replacing hardware.

The first step to adjust a tilt-and-slide patio door is to remove the panels. Set it on an even surface. After removing the panels employ a screwdriver to take the plastic caps from the holes of each adjuster. After these are removed, the adjuster can be pulled out of its channel using a long shaft screwdriver. After removing the adjuster, clean it using denatured or ruby alcohol. This will remove any grit that is hindering the roller to retract easily into its channel when the process is completed.


When you are reinstalling a moveable panel, align it with the frame and then use the drill to drive the screws along the flange. The flange should be secured tightly to the door edge while ensuring that the flaps orient correctly. After the movable panels are in place Apply silicone-based lubricant to the top track block for the arm connector, the lead Bogie wheels and the slave Bogie wheels, and then replace the cap on the hole made of plastic.

Repeat the procedure on the two other moveable panels to restore slide function. Then, put back the plastic flanges. Then, glue the jamb side strip to the equivalent fixed panel using a plastic adhesive. After the glue has dried then reattach the handle and verify smooth operation. If there are any issues, you can adjust the lead Bogie wheel again by taking it out of its channel, cleaning it and reinstalling it with a bead of silicone-based grease.

Charley Bar Installation

A patio door is a great means to let your pets in and out of the house, but it can also be an easy access point for burglars. Put a pin lock on your patio door or a charley-bar for added security. These devices offer a combination of security and convenience that is unmatched by any other product on the market.

The bar charley is a fantastic alternative for your sliding glass door and can be easily installed at your home. The charley bar can be installed in the middle of your door, and it prevents the patio door from being jibbered open by tools or other items, such as the hockey stick or broom handle. The charley bars are made of polycarbonate injection-molded tubes and extruded RPVC tubing, which makes them strong and durable.

To install the charley bars, first make sure that it is the right length for your door by measuring horizontally from the edge of the track for sliding doors to the sliding glass patio door. Mark the points with a pencil where the bars will be erected. Use an eighth-inch drill bit to drill holes into the wall jamb and the frame of the patio door, being careful not to penetrate the glass of the patio door. Then tighten the screws that came with the charcoal bars.

The Charley bars are an excellent choice for sliding glass patio doors or windows made of sash. This simple security gadget will keep your sliding patio doors safe from burglars and tampering for years to come. It is made from injection-molded polycarbonate, and it has been tested by Intertek to withstand more than 400 pounds of pressure. Additionally the charley bar can be locked with the key included with it. It's easy to put it up and hangs away when not in use. You can purchase an charley bar from many hardware stores. If you are looking for a charley bar that works, purchase it from an online retailer.