10 Things Your Competitors Teach You About Upvc Door Handle Replacement Choosing the Right UPVC Door Handle Replacement

Replacing your door handles made of upvc is relatively easy but picking the right handle can be tricky. Modern double-glazed handles include spring cassettes within the handles, but older ones don't.

If the upvc handle on the multipoint lock is loose and floppy, there could be an internal issue. This article will address the various possible issues & their causes.

Sagging or drooping handles

UPVC handles can withstand wear and tear, particularly in older properties. The most common reason handles become floppy is because of a broken spring cassette within the door lever. This is usually caused by excessive force, and the square spindle that supports the cassette could be moved or rounded off.

The good news is that a uPVC door handle replacement is a fairly simple task and can be done within a couple of minutes. The first step is removing the handle unit that was previously used. To remove it, loosen the fixing screws that are visible on the back of the handle lever. After the handles have been removed, you can then remove the cassette from the square spindle, and replace it with the new one.

You can find a vast selection of uPVC door handles to choose from on the internet and a lot of them are available in various finishes. The finish you choose will determine the life span of your handle as well as how it is easy to clean. Finishes like Resista Stainless Steel, or PVD are designed to resist corrosion and last for up to 25 years.

Once you have selected a colour or style you can then choose the type of handle you need. The most popular are lever and pad arrangements. Lever pads are typically used to prevent unauthorised access. They are equipped with both a lever inside and a paddle on the outside.

Then, take a measurement and note the dimensions of the handle you have. You will need to know the PZ dimension (the distance from the screw hole to the centre of the lever) and the length of the handle as well as the dimensions of the keyhole. Once you know the measurements, you can compare them to the handle sizes matrix to determine the appropriate replacement.

Broken springs

Over time uPVC door handles may become wobbly or loose and sometimes the spring cassette inside could break. These little springs help to move the lever into a horizontal position and without them, your doors won't be able to lock properly.

Modern uPVC handles come with these cassettes incorporated directly into the back plate. However older uPVC doors often contain these springs within the lock mechanism. This can't be fixed by yourself, but it is worth getting your locksmith to look at this as it could be the cause of the sagging or drooping uPVC door handles.

One of the most common issues associated with uPVC door handles is that they become unstable or wobbly after a certain period of time, and this is usually due to worn out springs which can be easily fixed. Most often, this is caused by excessive use of the handle and because of that the square spindle in the handle will wear away and cause the springs to be displaced.

To solve this issue, you'll have to open the door to the handle plate and then remove all screws. This can be done with a Philips screwdriver. Once the screws are removed, the handle can then be taken off. The plates for the handle are then able to be gently taken apart. Then, you can remove the springs from the old ones and replace them with fresh springs.

Depending on the type of handle you have the distance between the two fixing screws may differ and it is crucial to know prior to purchasing the replacement. This measurement is referred to as the PZ measure. It is recommended that this measurement is taken with an accurate tape measure to ensure accuracy.

After replacing the springs, you should be able to operate the handle without any problems. But, it's worth lubricating the mechanism inside to make sure that everything works as it should do. door handle repair near me will not just ensure that your uPVC doors are as secure as they can be but also make them more comfortable to operate for a long time.

Handles that slide around

Handles that slide around can be caused by a variety of reasons, but one of the most frequent causes is when the levers of the handle aren't aligned correctly with the lock. This can happen on both uPVC and composite doors, but it is generally more noticeable on older doors because they are typically made of less durable materials that don't hold up to the elements.

This problem can be solved by a professional, who will adjust the handles and ensure that they are in line with the door lock. They'll also examine the lock to see what requires fixing. In most instances, a minor tweak to the handle springs is all it takes to resolve this issue.

It's simple to replace your uPVC handle however, you must take measurements of the handle you have to ensure that the replacement is of the right size. You'll need to measure the distance between the two fixing screws and the dimensions of the lever and key-hole position. Then, you can utilize this uPVC handles size guide to find the right replacement for your home.


Once you have the measurements, the next step is to take off the old uPVC handles. It's usually a simple procedure and requires only an screwdriver. Once the screws are removed, you can remove the handle and then proceed to install the new one.

Before you start, it's worth ensuring that the door is securely open by a wedge to stop it from closing during the course of your work. After the handle has been removed you'll be able to inspect the underside of the door to fix the issues that cause it to sag.

If you don't have the patience or energy to tackle this job yourself, a handyman from Fantastic Services can help. They will employ specialist locksmith opening techniques to open the door without causing any damage and then replace the damaged handle and make sure that everything is in place and functioning as it should be.

Gearbox damage

A damaged gearbox can cause the door handle made of upvc to become stiff or lose its functionality. The lock may also be unable to be opened using the use of a key. This can be very dangerous and should be addressed as soon as possible. If you are unable to solve the problem yourself it is crucial to get in touch with a locksmith because they are experts and have the tools needed to complete the task correctly.

The first step is removing the handle from the cover plate. You can do this with a screwdriver that has flat-headed tips. After you have removed the handle, you are able to remove the middle screw that holds the cylinder in position. After removing the middle screw, you will be able to loosen the two screws that secure the barrel. Then, you can pull the barrel out of the door. You'll need to prop the door open to accomplish this, so make sure to have someone available to assist.

After taking the cylinder off and replacing it the cylinder with a new one. Make sure that the new cylinder is the same size as your old one. You might end up with an improperly aligned handle. This can cause a variety of issues, such as leaks and drafts.

Most door handles made of upvc feature slots that allow for adjustment. These slots can be used to tighten and loosen the handle. They are typically located on the inside of the door near where the handle is connected to the cylinder. The adjustment slots can be tightened by using an allen wrench. After you have made the adjustments you can place the handle back into place and screw it back into. Then, you'll be able to test the handle to be sure it's working properly.

If the upvc door handle is loose or sloppy when closed, this is usually an indication that the gearbox in the upvc has failed or the internal spring components are breaking down. This can cause your multipoint locks made from upvc to fail, leaving your door wide open to intruders. In this case the gearbox made of upvc will require replacement. The cost will range from PS145 to PS280 with the labor included.