11 "Faux Pas" That Are Actually Okay To Make With Your Double Glazed Window Repair
Double Glazed Window Repair
Double-glazed windows are usually covered with a warranty, so it's worth checking what this covers. Generally, it includes any problems with the window hardware such as hinges and locking mechanisms - within the first 10 years.
The mist that forms between the glass windows is usually caused by a break in the seal, and it's something that must be fixed quickly to stop damp or mould from forming in your house.
Condensation Between the Windows
If condensation appears between your windows, this could be an indication that the seal in the gases that insulate the window has failed. This is a serious issue that needs to be addressed immediately, especially during the winter months when humidity levels are at their highest. It could also cause damage to sills, sealant and mould.
![](https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/Boarding-Up-Services-300x200.jpg)
Double-glazed windows shouldn't be able to have condensation between the panes. This issue is often caused by extreme humidity or a cold snap. This problem is usually resolvable without the need to replace an entire window. A professional can drill tiny holes into the glass and spray the inside of the window with a special cleaning solution. The moisture is then sucked out of the window and an anti-fogger device can be fitted to prevent further accumulation of moisture in the future.
Condensation may also occur between the windows due to air leakage, or other factors outside the window. If this is the case, it will likely take longer for the moisture to accumulate in the window, as the air must be warm enough for the water molecules to evaporate. In these instances, it is better to replace double-glazed windows than attempt to repair the sealed units.
Double-glazed glass windows are composed of two or more pieces of tempered, insulated glass that are held together by a metal framework. The gap between the two windows is filled with an insulating gas such as Krypton or argon, and then sealed. The seal stops the insulating gases from leaving and also stops moisture and air from entering the gap.
As windows age, seals can get damaged and allow moisture to escape between the glass panes. If the seals begin to leak it is essential to recognize this as it signifies that the double glazing no longer performs as efficiently as it did before. This could result in lower energy efficiency, higher heating bills, damaged property and the risk of condensation between the windows.
Mist
It is normal to see condensation on your windows. This means that your double glazing system is working correctly and is able to maintain heat in your house. The condensation occurs because the outside air is warmer than the glass and reaches its dew point before the window. Double glazing of high quality is an excellent way to achieve this.
If you see condensation on the inside of the window, this could be an indication of an issue with ventilation in your home. This is because the excess moisture has nowhere to go and ends up on your window, in carpets, in furniture and other areas in your home. The process of having this examined by an expert and ensuring that there plenty of fresh air moving through the home will help avoid it in the future.
The other reason you might get mist on your double glazed window is that the seal between the two panes has worn down. This could be due to wear and tear, or by using chemical cleaning products. The most effective solution is to get the windows repaired in the shortest time possible.
A professional repair of your windows will ensure that they are fog-free free of condensation and free of misting. It is also less expensive than replacing the windows, and you will save money on your energy bill.
A FENSA-registered window installer will provide you with a cost estimate to repair or replace your double glazed Windows. Upgrade your old windows to energy-efficient A-rated ones in the event that they are extremely old.
It is a good idea to retain copies of any warranties and agreements with the window installers. This will be very useful if any problems with the windows occur in the future, and you then contact your installers to resolve these issues. This is a better choice to ignore the issue, which could lead to more problems for your home.
Close or open with difficulty
It's not just annoying when double-glazed windows are hard to open or close. They could cause higher energy bills because of the loss of heat and drafts. It could also be a security risk, especially when the locks aren't functioning correctly. You should fix any double-glazed windows and doors as soon as possible.
If you are unable to open your window and you've tried the most basic of solutions such as using a screwdriver to pry it open or tapping around the frame with a tough object, then the issue could be more serious. The window may have shifted and needs to be re-set or there could be a gap between the glass and frames. In either case, you must consult a double-glazing repair specialist to ensure the repairs are done properly and to avoid any further issues.
It isn't uncommon to find UPVC window handles and lock mechanisms to get stuck or unusable, especially when they are old and worn. It usually happens due to an accumulation of dirt or grease in the handle. This can be easily solved by cleaning it with a uPVC cleanser. If this does not work, you can try tapping the uPVC using a screwdriver. Be careful not to scratch the handle or the window handle mechanism.
If this does not resolve the issue, then the window may need to be replaced, as it is likely that the hinges aren't longer in the correct position or the locking mechanisms are damaged. In this instance you should consult an UPVC window expert.
RepairMyWindowsAndDoors is a specialist in double-glazed window and door repairs, including fixing double-glazed windows that have jammed or been locked shut. He has vast experience the conversion of old window mechanisms into modern ones and will often reduce the cost of replacing the whole window. Contact us now for more information or a no-cost quote.
Warping
Double-glazed windows are usually a great option for saving energy in your home. They are made up of two separate panes which have a spacer, or dense gas between them. This creates a seal that keeps cold air out and warm within. However in time, windows can be damaged or broken and require repair. Fortunately, the majority of these repairs are easy and can be completed without the cost of replacing the entire window.
Warping is a common problem when double-glazed windows are installed. The windows begin to flex or twist, or bow. This can affect the structural integrity and insulation abilities of the window. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.
Contact a professional when you realize that your double-glazed windows are warping. This will help stop the problem from becoming worse. They will be able inspect your windows to determine the cause. They will use special tools to correct your issue and make sure that your windows are completely sealed.
The most common cause of this issue is water vapour that is trapped between the windows, which can build up over time. This can be caused many different reasons like weather conditions, humidity and temperature variations. To fix this problem the expert will drill a small hole to release moisture. The specialist will apply a cleaner on the glass to clean it and then apply a sealant.
In the alternative, if your windows aren't being closed or opened, this may be a sign of a break in the mechanism or hinges. It is advisable to lubricate the parts of the window before calling a professional as this can often solve the issue and lessen the necessity for replacements. If your windows are old or are not providing the insulation you'd like to see it is usually better to replace them.