Repairs To Upvc Windows: What Nobody Is Talking About Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers that will assist the new pane to fit properly into the frame of the window.

If you plan to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you may think about the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a number of problems, including sagging. window repair near me sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window to access the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to act if you get up each morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Based on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It's easy to change a window hinge but it's much simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.


5. Draughts

Draughts can be caused by different things. The hinges can also become misaligned due to wear, creating gaps where the sash meets frame. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock, which is on the hinge side of the window, may be misaligned. Again, it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be placed on top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your upvc window it is recommended to speak with an expert immediately.