20 Questions You Should Always Have To Ask About Double Glazing Lock Repairs Before You Purchase Double Glazing Lock Repairs Double Glazing Lock Repairs

Good locks on your windows and doors can stop burglars from gaining entry into your home. They usually don't want breaking glass or trying to squeeze through open windows.

However, some double glazing owners have encountered problems with their door or window lock after it's been installed. Fortunately, these issues are usually fixable and don't require to buy new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window or door lock if it is broken or faulty. They will be able to repair the hinges, striker plates and locks on your double glazing. They can also reposition the cylinder in order to fix any misalignment that could be causing your handle not to function properly.

If the key fits into the lock but doesn't turn or is difficult to insert then the mechanism may be seized up. The dirt or grease could be trapped in the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate. It is crucial to make use of a dry lubricant such as graphite or teflon instead of oil, which attracts dirt and adhere to the inside of the mechanism. After lubricating the lock, you should insert the key and try to turn it. The lubricant should work its way through the mechanism, and the lock should be able to turn without difficulty.

A faulty lock can also be caused by loose screws in the lock mechanism. They may loosen, fall out, or even break off completely, preventing the lock from being able to perform as it should. A screwdriver is a tool to tighten the screws but caution must be taken not to over-tighten them as this can cause damage to the internal components.

A broken lock can be hazardous for you and your family. This is especially relevant if you have young children. They can easily unlock the door without your knowledge which gives them access to your home. If you're worried that this could happen, a vetted professional locksmith can help secure the double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company based in Lancing and can repair all kinds of damaged and damaged mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement windows and doors are not always necessary.

Handles that are damaged or damaged

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great option for those concerned with potential thieves who may try for ways to gain access to your home. It is also a good idea to ask your installer about anti-lift locks which can be put in in addition to the locks already in place and ensure that your window is secured in its closed position.

Handle locks can be damaged or fail. They are the first thing criminals utilize to force open your window. The good news is that this is one of easiest parts to repair.

Modern uPVC and aluminium handles have a multi-point locking mechanism known as Espagnolette which is designed to resist forced entry. This security upgrade is usually available as an extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional feature on all new double-glazed window installations.

It is important to repair the handle as soon as possible after it has been damaged. A damaged handle could prevent the window from closing properly and permit drafts to enter. It may also be a weakness that opportunistic burglars could exploit, therefore putting your belongings and family at risk of being stolen.

The process of fixing the damaged mechanism begins with getting access to the frame of the window and then removing the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that is in line with the profile of the internal window frame mechanisms.

After the mechanism has been repaired the handle can be put back together using the original screws. However, we suggest replacing them with longer screws to ensure the most secure fit. The final step is to seal the handle with a clear sealant. This will help protect it from further corrosion. Once you've completed this step your window will be fully functional again at a fraction the cost of replacing it.

Broken or Faulty Hinges

If your windows do not close properly, you could suffer from draughts or the weakening of your home's security barrier and an increased chance of damp or water damage. Window hinges that fail or become faulty are a common issue and can be easily repaired.

If you have a uPVC windows that isn't able to open or close, it's likely your hinges are broken or damaged and require replacement. While a lot of window companies require you to purchase a new window to fix this simple problem, we're able to replace the damaged hinges and save you money.


Window hinges are often damaged by repeated use, or weakening over time due to corrosion. In the event of a damaged hinge, it is important to take measures to prevent further damage by taking care not to make the window swing to open or close.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all window hinges. Talk to a professional before purchasing parts that will not work with your existing hardware. This can cause further damage.

A damaged hinge can be a huge problem for your uPVC windows and doors. They can be a major source of noise and can also allow water to infiltrate which could damage your windows.

To resolve this issue, first check whether the pin barrel on both sides of the hinge is aligned. If it's not, tap the head pin using the hammer to create a shallow bend in the hinge barrel. This will keep the pin in its place. Then, ask a friend to hold the door while you remove the hinges and hinges from both the doorjamb as well as the door. Replace the hinges and then install screws using glue. When the glue is drying, fix the hinges by using clamps or weights.

Once you have repaired your hinges, you are able to install the door again. You could also reattach the handle. It is recommended to replace the screws with the same length of dowels as the original screw, so that they match up with each the other.

Glass that is Broken or Faulty

uPVC Windows can become damaged in time, despite the fact they are extremely effective in keeping cold out and conserving heat. This can be the case with broken or damaged glass as well as defective locks. This is a problem that could be extremely costly if left unattended. It can also detract from the aesthetics of your home and may lead to a loss of insulation, which is why it's crucial to repair any damage as soon as possible.

If your glass is cracked but not shattered, you can usually fix it yourself using the right tools and techniques. First, make sure that the surrounding area around the glass is clear so that any shards don't injure anyone and aren't an accident hazard. Remove the broken glass pieces and dispose of them in the appropriate manner. Apply masking tape over the entire area. This will stop glass shards from sticking to your skin and scattering when you move them. If you're dealing with a double-paned window it's a good idea prepare the glass before gluing it back in place so that you are sure you'll have enough room to complete the project.

Before applying the glue, wipe the surface of the broken frame and glass with a a dry, clean cloth. Follow the directions for application and curing times which may differ from product to. Based on double glazing repair of the crack, you may want to hold the glass during curing. This can be done using lightweight clamps that are designed to hold fragile materials.

Once the adhesive is fully set, carefully place the glass inside the window frame, making sure it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful not to bend the window when it's being installed, as this could weaken the seal and cause water infiltration and condensation.

Contact a professional glazier, such as O'Brien(r) to arrange an appointment to replace your glass if the window is completely broken. If you leave broken glass unattended, it could cause danger to pet and children, so it's essential to act swiftly.