10 Myths Your Boss Is Spreading About Repairs To Upvc Windows Repairs To Upvc Windows Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum and timber.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, you will need to source some plastic spacers to help the new pane to fit properly into the frame of the window.

If you're planning attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea tape the gap once the glass is removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging


uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. With a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If window repair are happy with the size of the window, you can tighten screws to hold them in place.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment to ensure that it fits. The corners of the sash should align with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

It is a fairly easy fix that can be done by any competent DIYer. Based on the severity of the issue the old caulking may require removal before a fresh layer can be applied. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window harder to clean and decrease its energy efficiency.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease it could be hinges at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges will be damaged over time. It is essentially a simple process, but it's easier to do if you have someone to help you hold the frame up.

Verify that the uPVC hinges are closed and open in the right direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should open.

The problem can be caused by opening the window incorrectly or due to a poor installation at the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. Firstly the hinges, again due to wear and tear can become misaligned, this can cause gaps to develop where the sash meets the frame. If they are beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, may also be misaligned, and again it's possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional immediately.