Repairs To Upvc Windows: What's The Only Thing Nobody Is Talking About Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. However If windows with double panes are held in place by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need source some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.


Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to fix the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is large, you might be interested in the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. Then, window repairs near me can remove the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it can be due to the handle mechanism wearing out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform an experiment fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be put on. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window however it is easier if someone else helps you to hold the frame.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you advice.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear may become displaced, which can cause an opening to appear between the sash and the frame. These can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock may be disaligned. This happens on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.