17 Signs That You Work With Sliding Patio Doors Repair
Sliding Patio Doors Repair
It is possible for sliding patio doors to be difficult to open and close. This could be due to a variety of issues, including dirty tracks or rollers that are not aligned properly.
Start by cleaning and lubricating your rollers. You can also use the adjustment holes on the bottom of the movable panel to adjust the alignment of your rollers.
Track that is damaged or dirty
A dirty or damaged track can cause the sliding door to not move properly. Over time dirt and grit, as well as rust can build up blocking the track from moving smoothly. A gentle detergent and a brush will do the trick. This process should be carried out regularly to ensure a smooth operation and avoid costly repairs in the future.
A door that is leaking can be a common issue. It needs immediate attention to stop structural damage, water damage and mold growth. Often the problem stems from worn weather stripping and misaligned doors. These can be corrected by replacing the weather stripping and by aligning the door.
Another issue that can be resolved with some DIY work is the problem of rollers that veer off their tracks. Find a friend to assist you with this task, as the door can be heavy. To reposition the rollers to the right position, sit inside the house and lean one of the panels towards you. To stop the panel from falling, place it on sawhorses once it's been lifted off the bottom track. Then, loosen each of the roller's screws and then pry them out with the help of a screwdriver. Now, you can get rid of any dirt that is stuck between the wheel and tracks. You can then clean each wheel using denatured alcohol and a rag, then reposition the wheels and reconnect them to their tracks.
If a portion of the track is bent, it might be possible to straighten it using a rubber mallet and block of wood. If the bent portion is near hinges or is likely to cause more damage, you should contact a professional.
Rollers that are misaligned
If your sliding door has difficulty sliding, it's most likely that the roller wheels have been misaligned. The wheels may be dirty, rusted, or their bearings are worn out. This causes friction between the bottom of the door and the track, which causes it to grind or snag when it's shut or opened. This can also trigger the sound of squeaking.
Fortunately it's a simple fix. You don't have to remove the door to access the wheels since they are mounted on a bracket which is adjustable. Find
patio doors repairs (usually on either side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise rotation lowers it. Continue to adjust until the door moves smoothly and quietly when open or closed.
It is important to adjust the wheels prior making adjustments to the latch. To ensure that the lock functions correctly, the latch hooks must be aligned with the strike plate. If you don't take this step, the latch may accidentally open or shut while you are out of the room.
Sliding patio door are an investment. Keeping them in good condition will ensure the safety of your family. By addressing common problems like broken tracks, rollers and handles, you can prevent costly repairs in the near future. If you need help with your patio doors, get in touch with our team. We can help you maintain your sliding patio doors in good condition by assessing your repair needs. Our experts can also help with any replacement parts you may need.
The door frame is damaged or damaged

Sliding patios doors are a wonderful addition to any home. They provide a convenient and attractive alternative to hinged or swing-open doors for patios. Like any other hardware item, sliding patio doors can be prone to problems in time. Many of these issues are easy to fix with a bit of DIY skills.
A common issue that affects sliding patio doors is gaps in the frame. This can be caused by various reasons, including misaligned track or rollers or a damaged door track or bent door frame. In the majority of cases the reason for this issue is easily remedied by removal of the door and reconnecting the track or rolling elements. It is essential to be careful not to cause damage to either the frame or track.
In certain situations, it may be necessary to replace the entire track. This is easily done with a universal replacement kit which is available at most major hardware stores. These kits are easy to install and will have your door functioning properly again in a matter of minutes.
It is crucial to check your sliding door frame and hardware for signs of wear and tear, for instance loose screws or bolts. These can often be tightened with a screwdriver, or wrench which makes this a simple and efficient DIY patio door maintenance process. In addition, it is essential to oil your tracks and rollers to facilitate smooth operation and prevent premature wear.
Patio doors are usually the primary entrance to the backyard and outdoor living area for a majority of homeowners. As such, they need to be able to function correctly to maintain the comfort of their home and offer security. By making the effort to implement these simple DIY maintenance steps, homeowners can prolong the lifespan of their sliding patio doors, and avoid costly repairs or replacements.
Handle is not working properly
Sliding patio door are a great way to enter your home and access your backyard, but they can be difficult to operate if they are not aligned properly. A damaged handle could cause the door to not open or close correctly. Fixing a loose handle can be accomplished at home.
In many instances the loose grip is the result of screws that have fallen out of the backplate. To remedy the issue tighten the screws on the inside of the handle using a screwdriver. If you notice that the handle remains loose, it may be an indication that the threads have worn and need to be replaced.
A broken latch could be the cause. This is more likely occur if the latch is made of plastic, not metal. You can try applying lubrication to the latch if it is not engaging or turning. If this doesn't work, you may need to replace the lock.
If the handle is cracked or broken, it may be difficult to operate. If this happens, it will be necessary to replace it with a brand new handle that is in line with the design of your sliding patio door.
If your patio doors are outdated and old or new, Feldco can help you get them back on the right track. We offer a broad selection of high-quality patio doors in different sizes and styles. Contact us today for more about our doors! We proudly serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.
Unusual Weatherstripping
It's time to upgrade your weather stripping if you see light around closed windows and doors or feel a draft pulling towards the door or window. These strips create a tight seal that prevents insects, air, and water from entering your home. This helps to keep your conditioned and heated air in, thereby saving money on energy bills.
It could have lost its positive seal, bouncy, due to age. You can easily diagnose this by running a dollar note under the seal at the top and bottom of the jamb and the door frame, where they overlap. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.
It's tempting to remove just the worn area of weather stripping to replace it, but this will leave cracks on each side of the new piece and could cause problems with the seal in the future. It is much more effective to replace all of the stripping. This will allow you to be at ease knowing that your door will be properly sealed.
For an easy DIY project follow our guide on weather stripping to take off the old weather stripping. Then, you can apply the correct material on your sliding patio door and door frame for a lasting, tight seal. This is a great opportunity to save money on your energy bills and repair your sliding patio door. Don't wait until it's too late. You'll save money and improve the appearance of your home.