Undisputed Proof You Need How To Repair Broken Car Key How to Repair Broken Car Keys

If your car key is damaged, you need urgent help. You can either wait for the dealer to give you a new one which can be a hassle or find other ways to get around, such as taking public transport or relying on your friends for rides.

If you have the proper tools, you can make some DIY fixes. You can apply penetrating oil and needle-nosed pliers.

Assessing the Damage

There's nothing more irritating than getting in your car to head out and then finding that your key has broken in the ignition. This is a frequent issue that can occur to anyone, and it can be a major stressor when you're in a rush to get to where you need to go.

Take a deep breath, and don't panic. If you stay calm you'll be able make better decisions and avoid worsening the damage.

Examine the key you broke to determine which parts are still intact and how much is in the ignition cylinder or lock. If the broken piece is inside the lock, you can spray a lubricant like WD-40 over the area to loosen it and make it easier to remove. If the broken part is located in the ignition, it is necessary to remove it using an instrument that is specifically designed for this purpose, known as an extractor for keys.

If the key is on the key ring, try to bend it back with pliers. This can be a difficult task, particularly in the event of a break near the connector. If you're unable to get it bent back in the correct position, use a clip and pull it straight outward.

Trying to force the key into the ignition will cause more damage and make it impossible to remove. If you are unable to get rid of the broken key, it's best to contact a professional locksmith or visit your car dealership.


There are a variety of methods available online to fix a damaged car key, however some of them could actually cause more harm. If you try to remove a damaged car key with a screwdriver, it can push the key deeper into the ignition. It can even damage the lock. To avoid this, don't insert anything other than a tool designed for removing keys into the keyhole.

Removal of the damaged part

Car keys are brittle A slight jolt or excessive use can cause them break in the ignition. It can be difficult to resolve this issue without the help of a professional. You could cause further damage by attempting to fix the broken key. Super glue and other methods are not recommended as they can be difficult to remove and might cause further damage to the ignition cylinder.

It's also a dangerous choice to use a magnet to remove the broken key. Magnets can cause damage to the electrical components of the ignition cylinder and make it even more difficult to pull the damaged key out. Another common error can result in a damaged key. This is when you use excessive force or make abrupt movements to turn the car key.

If the key fragment is exposed and visible, pliers or tweezers can be used to grip it and remove it. If the key is stuck in the ignition but is not visible, a small hacksaw blade or another small-profile tool can be inserted into the ignition to grasp the edge of the damaged car key and pull it out.

Another option is to apply penetrating oil to provide lubrication to the keyhole and reduce friction. Applying the oil and allowing it to sit for a few minutes will help in the removal of the broken key fragment. If the oil does not work, you can use an extractor for keys to remove the broken key fragment from the ignition.

car key remote repair will need to replace the key in the event that it is completely damaged in the ignition. A professional locksmith will reassemble the remaining pieces and use them as a template to create the new key which will be as similar as possible to the original. This ensures that the new key will work well and minimizes the possibility of misalignment in the lock or ignition system. This could lead to further issues that will require expensive and time-consuming repairs. It is recommended to regularly check and replace keys to cars is recommended to stop them from becoming worn out or damaged.

Removal of the Broken Blade from the Ignition

You may cause more damage if you push the ignition key. You can use any tools you own to remove it with care.

In this scenario Tweezers can be a lifesaver. They can grasp the broken piece of car key and help pull it out. You can also find dental picks, which are thin pointed tools that could be useful. You can also use coat hangers made of wire that is flexible enough to fit in the lock. You can try tapping the metal against an unfinished surface to release the key that is broken.

You can also use a mini hacksaw, which is readily available in a majority of hardware stores. It is smaller than a screwdriver and it is able to slip into the lock and secure the car key that is broken. This could suffice to get it out without damaging the ignition. You can also use thin needle-nosed pliers that will connect to the broken car key. If you're trying an instrument such as this, be sure to keep acetone and cotton swabs handy to get any glue left on the edge of the pliers after you've pulled it out.

It is not a good idea to use magnets in the removal of the damaged car key. They shouldn't be used close to an ignition, as they can damage the electrical components. They can also push broken key fragments deeper into the ignition, making it harder to remove them.

After you've removed your key, make sure to check the ignition for any visible indications of damage. If you find cracks or bends it is recommended to contact a professional locksmith. They can replace keys without causing damage to the ignition of your car. They can also give you tips on how to avoid further damage. The two pieces of your broken car key will help them understand the original form of the key, and will also allow them to create a precise duplicate for you.

How do I get an additional key

There are a few options you can do when your car key is broken. The most important thing to keep in mind is not to force your broken key into the ignition or lock as this can cause further damage and could lead to costly repairs in the future. Instead, it is recommended to contact an locksmith immediately for a professional assistance.

If your key plastic top isn't completely broken You can wrap it in clear tape to provide support and stop further damage. Another alternative is to apply super glue. To accomplish this, you'll need to wash the broken pieces before applying the smallest amount of super glue. After the glue is dry, you can attempt to press the pieces together to try again and hopefully you will be able to get your key working.

Alternatively, you can call the dealership for an alternative key. This is a good option because you will get a key that is matched to your vehicle and that is properly connected to the vehicle. This is usually more expensive than a locksmith, however it may be the fastest and easiest solution to your issue.

A professional locksmith will also be able to provide you with a spare key, which can be useful in the event of a future emergency. You can minimize the risk of your key breaking by taking care of it, by using key protectors and an emergency plan.

It can be a hassle to have a broken car key, especially if you're trying to start your car and it will not start. It can be tempting to take matters to your own however, DIY fixes usually backfire and can lead to misalignments that damage locks and ignition systems. Furthermore when your key is in the ignition, and you force it further this could cause damage to the battery of your key fob or cause other issues that require expensive repair. This is why it is best to contact a professional. A skilled locksmith for your car can quickly and effectively resolve the problem without causing damage to your car or causing more problems.